JK-SS plunger pump
JK-SS 21.15 N
Part number 28327
- 21Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 5.5Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 21 l/min
- Pressure
- 150 bar
- Speed
- 1450 rpm
- Absorbed power
- 5.5 kW
- Weight
- 10 kg
Kits
No kits are listed for this model. A supplier can look them up from the model JK-SS 21.15 N.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model JK-SS 21.15 N and part number 28327.
Motor
A 4-pole motor of at least 5.5 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Sa4 | 5.5 | 1450 | IEC 132S | IE3 | 10.6 | |
| RN 132Sa4 | 5.5 | 1430 | IEC 132S | IE1 | 11.4 | |
| RN 112b4 uprated | 5.5 | 1420 | IEC 112 | IE1 | 12.2 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112b4) No Annovi Reverberi flange listed for this motor.
- IEC 132, 38 mm shaft (RNE 132Sa4, RN 132Sa4) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
- IEC 132, 38 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 38 mm motor shaft to the pump shaft.