PumpLookupPump and motor part numbers
Mains Units

JRS plunger pump

JRS 14.12 N TA

Part number 27596

  • 14Flow, l/min
  • 120Pressure, bar
  • 2800Speed, rpm
  • 3.3Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi JRS pump

Specification

Flow
14 l/min
Pressure
120 bar
Speed
2800 rpm
Absorbed power
3.3 kW
Weight
3.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 43478Valve kit 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 43482O-ring kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 43894Plunger kit 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 43895Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 43896Water seal kit 

Exploded view

Annovi Reverberi exploded view of the JRS pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 3800250 Screw TSEI M4x81
2 3800180 Knob1
3 3800190 Screw1
4 1980220 Plate1
5 2760410 Spring1
6 4140170 Piston1
7 2260100 O-ring Ø 6,02x2,621 KIT 43482
8 660190 O-ring Ø 6,07x1,781 KIT 43482
9 2760210 Ring1 KIT 43482
10 3800210 Piston guide1
11 740290 O-ring Ø 14x1,781 KIT 43482
12 820510 O-ring Ø 10,82x1,781 KIT 43482
13 3800230 Piston1
14 2841080 Seat1
15 1470210 O-ring Ø 9x12 KIT 43482
16 3700240 Hose tail Ø 81
17 480480 O-ring Ø 4,48x1,781 KIT 43482
18 1250280 Ball1
19 1560520 Spring1
20 2760230 Fitting1
21 2760270 O-ring Ø 12x11 KIT 43482
22 394280 O-ring Ø 12,42x1,781 KIT 43482
23 2760120 Injector Ø 2,01
24 2760200 Spring1
25 2761511 Shutter1
26 2101770 O-ring Ø 4x2,51 KIT 43482
27 1345180 Screw TCEI M5x408
28 4140140 Washer8
29 4140730 Head1
30 3800200 Nut M16x11
31 3800240 Screw M3x41
32 3800310 Screw1
33 2760260 Plug 1/4" G2
34 2841530 Plug6
35 2849051 Complete valve6 KIT 43478
36 2841520 O-ring Ø 13,5x1,86 KIT 43482
37 3800140 Gasket6 KIT 43896
39 4140490 Bushing Ø 143
40 4140510 O-ring Ø 22,5x13 KIT 43896
41 3800170 Bushing Ø 143
42 3700250 O-ring Ø 8x1,13 KIT 43482
43 2841800 Plug1
44 3800111 Ring3 KIT 43895
45 4140520 Pump body1
46 4140150 Cover1 KIT 43895
47 4140360 Ring2
49 4140110 Bearing1
50 4140210 Plug1
51 4140430 Piston Ø 143 KIT 43894
52 4140070 Pin3
53 4140080 Connecting-rod3
54 4140090 O-ring1 KIT 43895
55 4140270 Screw TE 5x84
56 4140030 Cover1
57 4140050 Shaft1
58 4140100 Bearing1
59 4140190 Ring1
60 4140200 Oil seal1 KIT 43895
61 1380520 Key1
62 4149232 Head assembly1
63 1120681 O-ring Ø 3,39x1,781
64 600180 O-ring Ø 7,66x1,781
65 1344950 Plug1
66 2841800 Plug1
67 3800890 Ring3
68 3720730 Plug1
69 1682800 O-ring Ø 6x1,51
70 1982240 Ball1
71 3720760 Spring1
72 3720740 Seat1
73 3720750 O-ring Ø 4x11

Motor

A 2-pole motor of at least 3.3 kW drives this pump at 2800 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 112a2 42910IEC 112IE37  
RN 112a2 42895IEC 112IE17.8  
RN 100b2 uprated 42850IEC 100IE18  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RN 100b2) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNE 112a2, RN 112a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi JRS pumps

JRS 8.14 N TAJRS 8.14 N TSS TAJRS 8.15 NJRS 8.15 N TSSJRS 10.12 NJRS 10.14 N TAJRS 10.14 N TSS TAJRS 10.15 NJRS 10.15 N TSSJRS 14.12 N TSS TAJRS 14.15 N