PumpLookupPump and motor part numbers
Mains Units

RC-M plunger pump

RC-M 05.10 N

Part number 23443

  • 5Flow, l/min
  • 100Pressure, bar
  • 1450Speed, rpm
  • 0.98Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RC-M pump

Specification

Flow
5 l/min
Pressure
100 bar
Speed
1450 rpm
Absorbed power
0.98 kW
Weight
5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Other kits2

Part numberDescriptionPer pumpSuppliers
KIT 2191Support ring kit, Ø15 mm 
KIT 42495O-ring kit 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 42468Oil seal kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 42475Plunger kit, Ø15 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42476Water seal kit, Ø15 mm 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 42494Valve kit 

Exploded view

Annovi Reverberi exploded view of the RC-M pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 3200110 Plug6
2 1200690 O-ring Ø 15,6x1,786 KIT 42495
3 3209050 Complete valve6 KIT 42494
4 800410 Screw TCEI M6x408
5 1381550 Washer8
6 3200100 Head1
7 180101 O-ring Ø 17,5x21 KIT 42495
8 820361 Plug 1/2" G brass1
9 740290 O-ring Ø 14x1,781 KIT 42495
10 1980740 Plug 3/8" G brass1
11 2760220 Ring Ø 153 KIT 2191
12 1342761 Gasket Ø 153 KIT 42476
13 3200160 Piston guide Ø 153
14 3200690 Gasket Ø 153 KIT 42476
15 3200700 Ring3 KIT 42476
16 770590 O-ring Ø 21,95x1,783 KIT 42476
17 3200150 Piston guide Ø 153
18 3200010 Pump body1
19 1320370 Bearing2
20 1260790 Ring2
21 1260770 Ring2
22 395081 O-ring Ø 47,30x2,621 KIT 42495
25 3200070 Support1
26 1200430 Screw TCEI M6x168
27 3201890 Plug1
28 1260110 Nut3
29 1260100 Washer3
30 1260120 Piston Ø 153 KIT 42475
31 1260091 Plate3
32 1260460 Oil seal3 KIT 42468
33 480480 O-ring Ø 4,48x1,783 KIT 42495
34 3200060 Piston3
35 3200040 Connecting-rod3
36 1780050 Pin3
37 2760280 O-ring Ø 101,27x2,621 KIT 42495
38 3200030 Cover1
39 820510 O-ring Ø 10,82x1,781 KIT 42495
40 880581 Plug 1/4" G1
41 3200220 Screw TCEI 6x164
42 3200230 Key1
45 1260750 Oil seal1 KIT 42468
46 3200210 Foot2
47 1322640 Washer4
48 850250 Screw TCEI M8x124
49 394280 O-ring Ø 12,42x1,786 KIT 42494, KIT 42495
50 3209202 Head assembly1
51 3201460 Shaft1
52 3201860 O-ring Ø 51,8x0,51
53 3209615 Oil level assembly1

Motor

A 4-pole motor of at least 0.98 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 90Sa4 1.11440IEC 90SIE32.5  
RN 90Sa4 1.11410IEC 90SIE12.7  
RN 80c4 uprated 11380IEC 80IE12.5  
RNM 80c4 11410IEC 80Single-phase6.8 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 80, 19 mm shaft (RN 80c4, RNM 80c4) No Annovi Reverberi flange listed for this motor.
  • IEC 90, 24 mm shaft (RNE 90Sa4, RN 90Sa4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 80, 19 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 19 mm motor shaft to the pump shaft.
  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.

Other Annovi Reverberi RC-M pumps

RC-M 01.10 NRC-M 02.10 NRC-M 03.10 NRC-M 04.10 NRC-M 06.10 N