PumpLookupPump and motor part numbers
Mains Units

RCV plunger pump

RCV 3.5G25 D + F7

Part number 23971

  • 13.2Flow, l/min
  • 170Pressure, bar
  • 3400Speed, rpm
  • 4Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi RCV pump

Specification

Flow
13.2 l/min
Pressure
170 bar
Speed
3400 rpm
Absorbed power
4 kW
Weight
5.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2186Valve kit 

Other kits2

Part numberDescriptionPer pumpSuppliers
KIT 2191Support ring kit, Ø15 mm 
KIT 42470O-ring kit 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 42474Oil seal kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 42475Plunger kit, Ø15 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42476Water seal kit, Ø15 mm 

Exploded view

Annovi Reverberi exploded view of the RCV pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 3200110 Plug6
2 1200690 O-ring Ø 15,6x1,786 KIT 42470
3 2769050 Complete valve6 KIT 2186
4 800410 Screw TCEI M6x408
5 1381550 Washer8
6 3200930 Head1
7 180101 O-ring Ø 17,5x21 KIT 42470
8 820361 Plug 1/2" G brass1
9 740290 O-ring Ø 14x1,781 KIT 42470
10 1980740 Plug 3/8" G brass1
11 2760220 Ring Ø 153 KIT 2191
12 1342761 Water seal Ø 153 KIT 42476
13 3200160 Piston guide Ø 153
14 3200690 Gasket Ø 153 KIT 42476
15 3200700 Ring3 KIT 42476
16 770590 O-ring Ø 21,95x1,783 KIT 42470, KIT 42476
17 3200150 Piston guide Ø 153
18 3200010 Pump body1
19 1780490 Bearing1
20 1260790 Ring1
21 1780550 Ring1
22 395081 O-ring Ø 47,30x2,621 KIT 42470
25 3200070 Support1
26 1200430 Screw TCEI M6x164
27 3201890 Plug1
28 1260110 Nut3
29 1260100 Washer3
30 1260120 Piston Ø 153 KIT 42475
31 1260091 Plate3
32 1260460 Oil seal3 KIT 42474
33 480480 O-ring Ø 4,48x1,783 KIT 42470
34 3200060 Piston3
35 3200040 Connecting-rod3
36 1780050 Pin3
37 2760280 O-ring Ø 101,27x2,621 KIT 42470
38 3200030 Cover1
39 820510 O-ring Ø 10,82x1,781 KIT 42470
40 880581 Plug 1/4" G1
41 3200220 Screw TCEI 6x164
44 1321190 Bearing1
45 3200340 Shaft1
47 480671 Ring1 KIT 42474
48 1320050 Flange1
49 1200430 Screw TCEI M6x164
50 2761380 Valve1
52 2840270 Fitting1
53 1266330 Filter1
54 2841230 Fitting1
55 2840890 O-ring Ø 14x21
56 2760230 Fitting1
57 394280 O-ring Ø 12,42x1,781
58 2760270 O-ring Ø 12x11
59 1470210 O-ring Ø 9x11
60 2760120 Insert1
61 2760200 Spring1
62 2760130 Shutter1
63 1460430 O-ring Ø 4x2,51
64 1560520 Spring1
65 1250280 Ball1
66 480480 O-ring Ø 4,48x1,781
67 1982520 Hose tail Ø 81
68 3200560 Guide1
69 3200590 Ball1
70 770140 O-ring Ø 11,11x1,781
71 3200550 Seat1
72 660191 O-ring Ø 6,07x1,781
73 1080401 Ring1
74 480560 O-ring Ø 6,75x1,781
75 3200510 Piston1
76 3201820 Pin1
77 770090 O-ring Ø 5,28x1,781
78 3200540 Ring1
79 394280 O-ring Ø 12,42x1,781
80 1200690 O-ring Ø 15,6x1,781
81 3200530 Piston guide1
82 1980300 Nut2
83 3201340 Spring1
84 3200600 Washer1
85 3200480 Knob1
86 3000170 Nut1
87 3200520 Bushing1
88 3200500 Plug1

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 4 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 112a2 42910IEC 112IE37  
RN 112a2 42895IEC 112IE17.8  
RN 100b2 uprated 42850IEC 100IE18  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RN 100b2) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNE 112a2, RN 112a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi RCV pumps

RCV 2.5G25 D + F7RCV 2G25 E + F8RCV 3G25 D + F7RCV 3G25 E + F8