RFA plunger pump
RFA 10.7G50N DX
Part number 29970
- 40Flow, l/min
- 350Pressure, bar
- 1750Speed, rpm
- 27Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 40 l/min
- Pressure
- 350 bar
- Speed
- 1750 rpm
- Absorbed power
- 27 kW
- Weight
- 22 kg
Kits
No kits are listed for this model. A supplier can look them up from the model RFA 10.7G50N DX.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model RFA 10.7G50N DX and part number 29970.
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 27 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200a4 | 30 | 1475 | IEC 200 | IE1 | 57 | |
| RN 180Lb4 uprated | 30 | 1465 | IEC 180L | IE1 | 58 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 180, 48 mm shaft (RN 180Lb4) No Annovi Reverberi flange listed for this motor.
- IEC 200, 55 mm shaft (RN 200a4) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 180, 48 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 48 mm motor shaft to the pump shaft.
- IEC 200, 55 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 55 mm motor shaft to the pump shaft.