PumpLookupPump and motor part numbers
Mains Units

RG plunger pump

RG 30.25 N

Part number 27368

  • 30Flow, l/min
  • 250Pressure, bar
  • 1450Speed, rpm
  • 14Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RG pump

Specification

Flow
30 l/min
Pressure
250 bar
Speed
1450 rpm
Absorbed power
14 kW
Weight
16 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 1891Plunger kit, Ø22 mm 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2780Valve kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2783Water seal kit, Ø22 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2785Plunger guide kit, Ø22 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2873Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the RG pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1940140 Plug6
3 1949050 Complete valve6 KIT 2780
4 1140450 O-ring Ø 20,24x2,6212 KIT 2780
5 1940150 Ring6
6 880840 O-ring Ø 9,25x1,783
7 1940260 Screw TCEI M10x808
8 650530 Washer8
9 740290 O-ring Ø 14x1,781
10 1980740 Plug 3/8" G brass1
11 550350 O-ring Ø 23,81x2,621
12 1140300 Plug 3/4" G1
13 4020240 Head1
14 1940120 Ring3
16 1940270 Gasket Ø 223 KIT 2783
17 1940200 Piston guide Ø 223 KIT 2785
18 1940480 Gasket Ø 223 KIT 2783
19 1940460 Piston guide Ø 223 KIT 2785
20 820490 O-ring Ø 34,65x1,783 KIT 2783
21 1940560 Ring3 KIT 2873
22 4020010 Pump body1
23 1140370 Plug1
25 1941380 O-ring Ø 66,34x2,622 KIT 2873
26 4020080 Ring1
27 4020070 Plate1
28 4020160 Level gauge1
29 3680250 O-ring Ø 45,69x2,621
30 4020100 Shim 0.05 mm1
30 4020110 Shim 0.10 mm1
30 4020120 Shim 0.19 mm1
30 4020130 Shim 0.25 mm1
31 4020150 Cover1
32 850370 Screw TCEI M8x168
33 1940570 Nut3
34 1940580 Washer3
35 1420120 Piston Ø 223 KIT 1891
36 960460 Plate3
37 1940070 Piston3
38 1940051 Connecting-rod3
39 1940060 Pin3
40 1940410 O-ring Ø 132x31 KIT 2873
41 4020030 Cover1
42 740290 O-ring Ø 14x1,781
43 1980740 Plug 3/8" G brass1
44 1200430 Screw TCEI M6x166
45 1940160 Shaft1
46 650250 Key1
47 1140410 Bearing2
48 4020040 Cover1
49 820680 Ring1 KIT 2873
50 4029203 Head assembly1
51 4029000 Cover1
52 4029001 Cover1
53 1940370 Foot2
54 200231 Washer4
55 1940380 Screw TCEI 10x184
57 1941220 Gasket Ø 223 KIT 2783

Motor

A 4-pole motor of at least 14 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160La4 151465IEC 160LIE330.5  
RN 160La4 151450IEC 160LIE130  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.

Other Annovi Reverberi RG pumps

RG 13.17 NRG 15.15 NRG 15.20 H NRG 15.25 H NRG 18.17 NRG 18.20 H NRG 21.15 NRG 21.20 H NRG 21.25 H NRG 24.20 N