PumpLookupPump and motor part numbers
Mains Units

RGL plunger pump

RGL 42.10 N 27604

Part number 27604

  • 42Flow, l/min
  • 100Pressure, bar
  • 1450Speed, rpm
  • 8.2Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RGL pump

Specification

Flow
42 l/min
Pressure
100 bar
Speed
1450 rpm
Absorbed power
8.2 kW
Weight
16 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 1849Plunger kit, Ø28 mm 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2780Valve kit 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2873Oil seal kit 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 42707Plunger guide kit, Ø28 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42708Water seal kit, Ø28 mm 

Exploded view

Annovi Reverberi exploded view of the RGL pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1940140 Plug6
3 1949050 Complete valve6 KIT 2780
4 1140450 O-ring Ø 20,24x2,6212 KIT 2780
5 1940150 Ring6
6 880840 O-ring Ø 9,25x1,783
7 1940260 Screw TCEI M10x808
8 650530 Washer8
9 740290 O-ring Ø 14x1,781
10 1980740 Plug 3/8” G brass1
11 550350 O-ring Ø 23,81x2,621
12 1140300 Plug 3/4” G1
13 4020260 Head1
14 1940120 Ring3
16 820630 Water seal Ø 283 KIT 42708
17 1140280 Piston guide Ø 283 KIT 42707
18 2520360 Gasket Ø 283 KIT 42708
19 1942260 Piston guide Ø 283 KIT 42707
20 1140490 O-ring Ø 37,82x1,783 KIT 42708
21 1940560 Ring3 KIT 2873
22 4020010 Pump body1
23 1140370 Plug1
25 1941380 O-ring Ø 66,34x2,622 KIT 2873
26 4020080 Ring1
27 4020070 Plate1
28 4020160 Level gauge1
29 3680250 O-ring Ø 45,69x2,621
30 4020100 Shim 0.05 mm1
30 4020110 Shim 0.10 mm1
30 4020120 Shim 0.19 mm1
30 4020130 Shim 0.25 mm1
31 4020150 Cover1
32 850370 Screw TCEI M8x168
33 1940570 Nut3
34 1940580 Washer3
35 1140190 Piston Ø 283 KIT 1849
36 1140160 Plate3
37 1940070 Piston3
38 1940051 Connecting-rod3
39 1940060 Pin3
40 1940410 O-ring Ø 132x31 KIT 2873
41 4020030 Cover1
42 740290 O-ring Ø 14x1,781
43 1980740 Plug 3/8” G brass1
44 1200430 Screw TCEI M6x166
45 1940170 Shaft1
46 650250 Key1
47 1140410 Bearing2
48 4020040 Cover1
49 820680 Ring1 KIT 2873
50 4029204 Head assembly1
51 4029000 Cover1
52 4029001 Cover1
53 1940370 Foot2
54 200231 Washer4
55 1940380 Screw TCEI 10x184
57 2520230 Ring3 KIT 42708
58 1941570 Ring Ø 283 KIT 42708

Motor

A 4-pole motor of at least 8.2 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160Ma4 111475IEC 160MIE322.4  
RN 160Ma4 111450IEC 160MIE122.4  
RN 132Mb4 uprated 9.21440IEC 132MIE119.2  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 132, 38 mm shaft (RN 132Mb4) No Annovi Reverberi flange listed for this motor.
  • IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 132, 38 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 38 mm motor shaft to the pump shaft.
  • IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.

Other Annovi Reverberi RGL pumps

RGL 36.15 NRGL 41.15 NRGL 41.17 NRGL 41.20 NRGL 42.15 NRGL 50.15 NRGL 50.17 N