PumpLookupPump and motor part numbers
Mains Units

RSS plunger pump

RSS 13.17 N

Part number 23949

  • 13Flow, l/min
  • 170Pressure, bar
  • 2800Speed, rpm
  • 4Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RSS pump

Specification

Flow
13 l/min
Pressure
170 bar
Speed
2800 rpm
Absorbed power
4 kW
Weight
7 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2186Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2187Plunger kit, Ø15 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2189Water seal kit, Ø15 mm 

Other kits2

Part numberDescriptionPer pumpSuppliers
KIT 2190O-ring kit 
KIT 2191Support ring kit, Ø15 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2192Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the RSS pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 1060120 Nut1
2 392840 Screw M6x161
3 2760480 Insert1
4 1980220 Plate2
5 2760410 Spring1
6 2760400 Piston1
7 2260100 O-ring Ø 6,02x2,621 KIT 2190
8 660190 O-ring Ø 6,07x1,781 KIT 2190
9 2760210 Ring1 KIT 2190
10 2760050 Piston guide1
11 1200690 O-ring Ø 15,6x1,784 KIT 2190
12 394280 O-ring Ø 12,42x1,782 KIT 2190
13 2260070 Shutter1
14 2760980 Seat1
15 770140 O-ring Ø 11,11x1,781 KIT 2190
16 1982520 Hose tail Ø 81
17 480480 O-ring Ø 4,48x1,781 KIT 2190
18 1250280 Ball1
19 1560520 Spring1
20 2760230 Injector1
21 2760270 O-ring Ø 12x11 KIT 2190
22 1470210 O-ring Ø 9x11 KIT 2190
23 2760120 Insert1
25 2760130 Shutter1
26 2101770 O-ring Ø 4x2,51 KIT 2190
27 801080 Screw TCEI M6x508
28 1381550 Washer8
29 2760330 Head1
33 2760260 Plug 1/4" G2
34 2760180 Plug3
35 2769050 Complete valve6 KIT 2186
36 2760220 Ring Ø153 KIT 2191
37 1342761 Gasket3 KIT 2189
38 1981580 Ring3 KIT 2189
39 1981570 Piston guide Ø 153
40 770260 O-ring Ø 23,52x1,783 KIT 2189
41 1260440 Water seal3 KIT 2189
42 640070 O-ring Ø 13,95x2,623 KIT 2189
43 2760310 Spacer3
44 1260460 Oil seal3 KIT 2192
45 2760780 Pump body1
46 1266740 Oil seal1 KIT 2192
47 1260790 Ring1
48 1780550 Ring1
49 1780490 Bearing1
50 880130 Plug1
51 2760040 Piston Ø 153 KIT 2187
52 1780050 Pin3
53 1780040 Connecting-rod3
54 2760281 O-ring1 KIT 2192
55 802190 Screw TE 6x124
56 2760110 Cover1
58 1321190 Bearing1
59 1321080 Ring1
61 650250 Key1
62 2769201 Head assembly1
64 1260750 Oil seal1 KIT 2192
64 2760520 Shaft1 KIT 2192
72 740290 O-ring Ø 14x1,781 KIT 2190
73 1980740 Plug 3/8" G brass1
74 820510 O-ring Ø 10,82x1,781 KIT 2190
75 880581 Plug 1/4" G1
76 2760640 Ring1 KIT 2190

Motor

A 2-pole motor of at least 4 kW drives this pump at 2800 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 112a2 42910IEC 112IE37  
RN 112a2 42895IEC 112IE17.8  
RN 100b2 uprated 42850IEC 100IE18  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RN 100b2) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNE 112a2, RN 112a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi RSS pumps

RSS 11.14 C+F16RSS 11.14 NRSS 11.18 C+F16RSS 11.18 NRSS 13.17 C+F16 code 23396RSS 15.15 C+F16RSS 15.15 N