RTP plunger pump
RTP 30.600 N AP
Part number 22982
- 30Flow, l/min
- 600Pressure, bar
- 1000Speed, rpm
- 36Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 30 l/min
- Pressure
- 600 bar
- Speed
- 1000 rpm
- Absorbed power
- 36 kW
- Weight
- 78 kg
Kits
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42144 | Pump maintenance tools kit | ||
| KIT 42558 | Plunger guide kit, Ø20 mm |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42156 | Valve kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42157 | Plunger kit, Ø20 mm |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42159 | Water seal kit, Ø20 mm |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 42309 | Oil seal kit |
Exploded view
Parts list
Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 2820290 | Screw TCEI M12x110 | 8 | |
| 2 | 2820470 | Washer | 8 | |
| 3 | 2820020 | Head | 1 | |
| 4 | 770260 | O-ring Ø 23,52x1,78 | 1 | |
| 5 | 1140480 | Plug 3/4” G nickel-plated | 1 | |
| 6 | 740290 | O-ring Ø 14x1,78 | 3 | |
| 7 | 1981180 | Plug 3/8" G nickel-plated | 3 | |
| 8 | 1540120 | Washer | 1 | |
| 9 | 2820490 | Plug 1/2” G nickel-plated | 1 | |
| 10 | 2820110 | Plug | 3 | |
| 11 | 1941070 | Ring | 3 | |
| 12 | 880830 | O-ring Ø 15,54x2,62 | 3 | |
| 13 | 2829050 | Complete valve | 6 | KIT 42156 |
| 15 | 2820400 | Sealing system | 3 | KIT 42159 |
| 16 | 2821710 | Piston guide Ø 20 | 3 | KIT 42558 |
| 18 | 2820460 | Gasket | 3 | KIT 42159 |
| 21 | 2820480 | O-ring Ø 52,07x2,62 | 3 | KIT 42159 |
| 22 | 2820390 | Piston guide Ø 20 | 3 | KIT 42558 |
| 23 | 2822620 | Ring | 3 | KIT 42309 |
| 24 | 2820010 | Pump body | 1 | |
| 25 | 2820060 | Casing insert | 1 | |
| 26 | 820510 | O-ring Ø 10,82x1,78 | 1 | |
| 27 | 880581 | Plug 1/4" G | 1 | |
| 28 | 1343020 | Screw TCEI M6x16 | 3 | |
| 29 | 651540 | O-ring Ø 107,62x2,62 | 2 | KIT 42309 |
| 30 | 2820370 | Bearing | 2 | |
| 31 | 2820040 | Cover | 2 | |
| 32 | 1381850 | Washer | 18 | |
| 33 | 540290 | Screw TCEI M8x25 | 12 | |
| 34 | 2821740 | Shaft | 1 | |
| 35 | 2820280 | Key | 1 | |
| 35 | 2820090 | Shim 0.05 mm | 1 | |
| 36 | 2820180 | Shim 0.10 mm | 1 | |
| 36 | 2820190 | Shim 0.20 mm | 1 | |
| 37 | 2820860 | Cover | 1 | |
| 39 | 2820320 | Plug | 1 | |
| 40 | 2820330 | Eyebolt | 1 | |
| 41 | 2821910 | Piston Ø 20 | 3 | KIT 42157 |
| 42 | 2820130 | Plate | 3 | |
| 43 | 2820850 | Piston | 3 | |
| 44 | 2820210 | Pin | 3 | |
| 45 | 2820240 | Ring | 6 | |
| 46 | 2821760 | Connecting-rod | 3 | |
| 50 | 2820840 | O-ring Ø 221,92x2,62 | 1 | KIT 42309 |
| 51 | 2820030 | Cover | 1 | |
| 52 | 540290 | Screw TCEI M8x25 | 8 | |
| 54 | 2820310 | Plug | 1 | |
| 55 | 2820300 | Level gauge | 1 | |
| 56 | 850250 | Screw TCEI M8x12 | 2 | |
| 58 | 2820430 | Sealing system | 3 | KIT 42159 |
| 60 | 2820350 | Ring | 2 | KIT 42309 |
| 61 | 2829203 | Head assembly | 1 | |
| 62 | 850252 | Screw TCEI M8x12 | 3 | |
| 63 | 2820500 | Washer | 3 |
Motor
This pump needs 36 kW at 1000 rpm, more than the largest motor of that speed listed here.
Flange
The flange depends on the motor, so it is chosen with the motor.
Coupling
The coupling depends on the motor shaft, so it is chosen with the motor.