PumpLookupPump and motor part numbers
Mains Units

RTX plunger pump

RTX 50.300

Part number 26226

  • 50Flow, l/min
  • 300Pressure, bar
  • 1450Speed, rpm
  • 30Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RTX pump

Specification

Flow
50 l/min
Pressure
300 bar
Speed
1450 rpm
Absorbed power
30 kW
Weight
32.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 42835Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 42837Plunger kit, Ø25 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 42840Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 42842Water seal kit, Ø25 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 42852Plunger guide kit, Ø25 mm 

Exploded view

Annovi Reverberi exploded view of the RTX pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 3660890 Plug nickel-plated6
2 2821390 Ring6
3 1540630 O-ring Ø 23,47x2,626
4 3669050 Complete valve3 KIT 42835
5 3660880 Head1
6 390291 O-ring Ø 28,25x2,621
7 2820620 Plug nickel-plated1
8 1380690 Plug 1/4" G nickel-plated1
9 820510 O-ring Ø 10,82x1,781
10 850260 Screw TCEI M10x908
11 650530 Washer8
12 3669051 Complete valve3 KIT 42835
13 2820490 Plug 1/2” G nickel-plated1
14 1540120 Washer1
15 2821210 Sealing system Ø 253 KIT 42842
18 3660230 Piston guide Ø 253 KIT 42852
19 2821250 Sealing system Ø 253 KIT 42842
21 3660220 Piston guide Ø 253 KIT 42852
22 1320360 O-ring Ø 47,35x1,783 KIT 42842
23 3660310 Ring3 KIT 42840
24 3660010 Pump body1
25 3660060 Shaft1
26 3660320 Key1
28 3660290 Bearing2
29 3660040 Cover1
30 3660300 Ring1 KIT 42840
31 180030 Screw TCEI M8x2012
32 3660030 Cover1
33 740290 O-ring Ø 14x1,781
34 2282280 Plug1
35 780330 Screw TCEI M6x208
36 3660360 O-ring Ø 183,82x2,621 KIT 42840
37 3660330 Ring6
38 3660090 Pin3
39 3660070 Connecting-rod3
40 3660740 O-ring Ø 83x32 KIT 42840
41 1941290 Ring1
42 1941260 Plate1
43 1941270 Level gauge1
44 100410 O-ring Ø 34,6x2,621
44 3660260 Shim 0.05 mm1
45 3660270 Shim 0.10 mm1
45 3660280 Shim 0.19 mm1
46 3660050 Cover1
47 3660350 Plug1
48 3660081 Piston3
49 3660180 Plate3
50 3660150 Piston Ø 253 KIT 42837
51 3660340 O-ring Ø 12x23
52 3660170 Screw3
53 3669204 Head assembly1
54 3669002 Cover1

Motor

A 4-pole motor of at least 30 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 200a4 301475IEC 200IE157  
RN 180Lb4 uprated 301465IEC 180LIE158  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 180, 48 mm shaft (RN 180Lb4) No Annovi Reverberi flange listed for this motor.
  • IEC 200, 55 mm shaft (RN 200a4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 180, 48 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 48 mm motor shaft to the pump shaft.
  • IEC 200, 55 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 55 mm motor shaft to the pump shaft.

Other Annovi Reverberi RTX pumps

RTX 30.300 C+F56RTX 30.300 NRTX 30.300 N+F54RTX 30.500 C+F56RTX 30.500 NRTX 30.600NRTX 33.350 NRTX 50.200 NRTX 50.300 C+F56RTX 50.300 N+F54RTX 60.300 C DX+F56RTX 60.300 NRTX 60.300 N+F54RTX 70.150 NRTX 70.150 N+F54RTX 70.200 C DX + F56RTX 70.200 NRTX 70.250 NRTX 85.150 C DX+F56RTX 85.150 NRTX 85.150 N+F54RTX 100.120 C+F56RTX 100.120 NRTX 100.120 N+F54RTX 150.100 C + F56RTX 150.100 N