PumpLookupPump and motor part numbers
Mains Units

RTX-SS plunger pump

RTX-SS 100.100 N

Part number 26136

  • 100Flow, l/min
  • 100Pressure, bar
  • 1450Speed, rpm
  • 18Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi RTX-SS pump

Specification

Flow
100 l/min
Pressure
100 bar
Speed
1450 rpm
Absorbed power
18 kW
Weight
39 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 42839Plunger kit, Ø36 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 42840Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 43519Water seal kit, Ø36 mm 

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 43520Valve kit 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 43765Plunger guide kit, Ø36 mm 

Exploded view

Annovi Reverberi exploded view of the RTX-SS pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 4040060 Plug6
2 2821390 Ring6
3 1540631 O-ring Ø 23,47x2,626
4 4049050 Complete valve3 KIT 43520
5 4040210 Head1
8 4040120 Plug 1/4” G1
9 820511 O-ring Ø 10,82x1,781
10 850261 Screw TCEI M10x908
12 4049051 Complete valve3 KIT 43520
13 3660510 Ring Ø 363 KIT 43519
14 4040130 Gasket3 KIT 43519
15 3660520 Ring Ø 363 KIT 43519
16 3660730 Gasket3 KIT 43519
17 3660550 Ring3
18 4040160 Piston guide Ø 363 KIT 43765
21 4040150 Piston guide Ø 363 KIT 43765
22 1320361 O-ring Ø 47,35x1,783 KIT 43519
23 3660310 Ring3 KIT 42840
24 4040010 Pump body1
25 3660060 Shaft1
26 3660320 Key1
28 3660290 Bearing2
29 4040040 Cover1
30 3660300 Ring1 KIT 42840
31 180031 Screw TCEI M8x2012
32 4040030 Cover1
33 740290 O-ring Ø 14x1,781
34 2282280 Plug1
35 680700 Screw TCEI M6x208
36 3660360 O-ring Ø 183,82x2,621 KIT 42840
37 3660330 Ring6
38 3660090 Pin3
39 3660070 Connecting-rod3
40 3660740 O-ring Ø 83x32 KIT 42840
41 1941290 Ring1
42 1941260 Plate1
43 1941270 Level gauge1
44 100410 O-ring Ø 34,6x2,621
44 3660260 Shim 0.05 mm1
45 3660270 Shim 0.10 mm1
45 3660280 Shim 0.19 mm1
46 4040050 Cover1
47 3660350 Plug1
48 3660081 Piston3
49 4040170 Plate3
50 3660130 Piston Ø 363 KIT 42839
51 3660342 O-ring Ø 12x23
52 4040070 Screw3
53 4049201 Head assembly1
54 4049000 Cover1

Motor

A 4-pole motor of at least 18 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 180Ma4 18.51465IEC 180MIE137  
RN 160Lb4 uprated 18.51420IEC 160LIE138  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RN 160Lb4) No Annovi Reverberi flange listed for this motor.
  • IEC 180, 48 mm shaft (RN 180Ma4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.
  • IEC 180, 48 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 48 mm motor shaft to the pump shaft.