PumpLookupPump and motor part numbers
Mains Units

SHP plunger pump

SHP 15.50 N

Part number 21825

  • 15Flow, l/min
  • 500Pressure, bar
  • 1450Speed, rpm
  • 15Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi SHP pump

Specification

Flow
15 l/min
Pressure
500 bar
Speed
1450 rpm
Absorbed power
15 kW
Weight
16 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2185Valve kit 

Other kits2

Part numberDescriptionPer pumpSuppliers
KIT 2248Head maintenance tools kit 
KIT 42120Plunger guide kit, Ø18 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2872Plunger kit, Ø18 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2873Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2874Water seal kit, Ø18 mm 

Exploded view

Annovi Reverberi exploded view of the SHP pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 850260 Screw TCEI M10x908
2 650530 Washer8
3 1982570 Washer3
4 2460810 Screw TE M6x123
5 880830 O-ring Ø 15,54x2,623
6 1949052 Complete valve6 KIT 2185
7 1942190 Head1
8 180101 O-ring Ø 17,5x21
9 820361 Plug 1/2" G brass1
10 1980740 Plug 3/8" G brass3
11 740290 O-ring Ø 14x1,783
14 1942470 Piston guide Ø183 KIT 42120
16 1942690 Water seal3 KIT 2874
18 1340600 Washer3
19 1941020 Piston Ø 183 KIT 2872
21 1383190 Plate3
22 1942700 Gasket3 KIT 2874
23 1940960 Piston3
24 1940060 Hub pin3
25 1941380 O-ring Ø 66,34x2,622 KIT 2873
26 1941390 Shim 0.05 mm1
26 1941400 Shim 0.10 mm1
26 1941410 Shim 0.19 mm1
26 1941420 Shim 0.25 mm1
28 850370 Screw TCEI M8x168
29 1140410 Bearing2
30 1940051 Connecting-rod3
31 1940980 Shaft1
32 650250 Key1
33 1941330 Pump body1
34 1140370 Plug1
35 1260250 Level gauge1
36 1260430 Ring1
37 1940410 O-ring Ø 132x31 KIT 2873
38 1200430 Screw TCEI M6x166
39 1949010 Cover1
40 1780690 Plate1
41 1140450 O-ring Ø 20,24x2,621
42 820680 Ring1 KIT 2873
43 1940560 Ring3 KIT 2873
44 1940370 Foot2
45 1940380 Screw TCEI 10x184
46 200231 Washer4
51 1949011 Cover1
52 1941240 Support1
53 1941640 Screw TE M6x603
54 1940940 Plug3
55 1941070 Ring3
58 820490 O-ring Ø 34,65x1,783 KIT 2874
60 1949215 Head assembly1
75 1941270 Level gauge1
76 100410 O-ring Ø 34,6x2,621
77 1941260 Plate1
78 1941290 Ring1
79 1942480 Piston guide Ø 183 KIT 42120
80 1660200 Screw M5x61

Motor

A 4-pole motor of at least 15 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160La4 151465IEC 160LIE330.5  
RN 160La4 151450IEC 160LIE130  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.

Other Annovi Reverberi SHP pumps

SHP 10.50 NSHP 15.50 N+F62SHP 20.50 NSHP 22.50 NSHP 22.50 N+F62