PumpLookupPump and motor part numbers
Mains Units

XM plunger pump

XM 15.15 + F38

Part number 21598

  • 15Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 4Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi XM pump

Specification

Flow
15 l/min
Pressure
150 bar
Speed
1450 rpm
Absorbed power
4 kW
Weight
6.7 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 1864Valve kit 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2745Support ring kit, Ø18 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2746Plunger kit, Ø18 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2747Water seal kit, Ø18 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2787Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the XM pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960160 O-ring Ø 17,86x2,626
2 1260160 Plug6
3 1269050 Complete valve6 KIT 1864
4 880830 O-ring Ø 15,54x2,626 KIT 1864
5 620301 Plug 1/8" G1
6 1780140 Ring Ø183 KIT 2745
7 1260220 Water seal Ø 183 KIT 2747
8 1780110 Piston guide Ø 183
9 1780010 Pump body1
10 1266740 Oil seal1 KIT 2787
11 1260790 Ring1
12 1780550 Ring1
13 1780490 Bearing1
14 880130 Plug1
15 1780050 Pin3
16 1780510 O-ring Ø 106x31 KIT 2787
17 1200430 Screw TCEI M6x166
18 1789010 Cover1
19 1780040 Connecting-rod3
20 1780060 Piston3
21 480480 O-ring Ø 4,48x1,783
22 1260091 Plate3
23 1780080 Piston Ø 183 KIT 2746
24 1260100 Washer3
25 1260110 Nut3
26 1380141 Foot2
27 740290 O-ring Ø 14x1,783
28 1980740 Plug 3/8" G brass3
29 1263130 Screw TE M8x124
30 1260460 Oil seal3 KIT 2787
31 1780120 Piston guide Ø 183
32 770260 O-ring Ø 23,52x1,783 KIT 2747
33 1260450 Water seal Ø 183 KIT 2747
34 820361 Plug 1/2" G brass1
35 180101 O-ring Ø 17,5x21
36 1780020 Head1
37 1381550 Washer8
38 1322730 Screw TCEI M6x608
40 1321190 Bearing1
41 1321080 Ring1
45 1781140 Shaft1
47 480671 Oil seal1 KIT 2787
57 1789202 Head assembly1
58 1780430 Ring1
59 1383550 Flange1
60 180030 Screw TCEI M8x204
71 1260250 Level gauge1
72 1260430 Ring1
73 1780690 Plate1
74 1140450 O-ring Ø 20,24x2,621

Motor

A 4-pole motor of at least 4 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 112a4 41450IEC 112IE38.2  
RN 112a4 41430IEC 112IE18.5  
RN 100c4 uprated 41405IEC 100IE19.1  
RNM 112d4 41400IEC 112Single-phase22 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RN 100c4) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XM pumps

XM 11.17 CXM 11.17 NXM 13.17 C cod- 7938XM 13.17 NXM 15.15 CXM 15.15 N