XM-M plunger pump
XM-M 02-10 N
Part number 22093
- 2Flow, l/min
- 100Pressure, bar
- 1450Speed, rpm
- 0.4Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 2 l/min
- Pressure
- 100 bar
- Speed
- 1450 rpm
- Absorbed power
- 0.4 kW
- Weight
- 6.5 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 1864 | Valve kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2739 | Plunger kit, Ø15 mm |
Other kits1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2740 | Support ring kit, Ø15 mm |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2741 | Water seal kit, Ø15 mm |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 2786 | Oil seal kit |
Exploded view
Parts list
Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 960160 | O-ring Ø 17,86x2,62 | 6 | |
| 2 | 1260160 | Plug | 6 | |
| 3 | 1269050 | Complete valve | 6 | KIT 1864 |
| 4 | 880830 | O-ring Ø 15,54x2,62 | 6 | KIT 1864 |
| 5 | 620301 | Plug 1/8" G | 1 | |
| 6 | 1780130 | Ring Ø 15 | 3 | KIT 2740 |
| 7 | 1260130 | Water seal Ø 15 | 3 | KIT 2741 |
| 8 | 1780090 | Piston guide Ø 15 | 3 | |
| 9 | 1780010 | Pump body | 1 | |
| 10 | 1266740 | Oil seal | 1 | KIT 2786 |
| 11 | 1260790 | Ring | 1 | |
| 12 | 1780550 | Ring | 1 | |
| 13 | 1780490 | Bearing | 1 | |
| 14 | 880130 | Plug | 1 | |
| 15 | 1780050 | Pin | 3 | |
| 16 | 1780510 | O-ring Ø 106x3 | 1 | KIT 2786 |
| 17 | 1200430 | Screw TCEI M6x16 | 6 | |
| 18 | 1789010 | Cover | 1 | |
| 19 | 1780040 | Connecting-rod | 3 | |
| 20 | 1780060 | Piston | 3 | |
| 21 | 480480 | O-ring Ø 4,48x1,78 | 3 | |
| 22 | 1260091 | Plate | 3 | |
| 23 | 1780070 | Piston Ø 15 | 3 | KIT 2739 |
| 24 | 1260100 | Washer | 3 | |
| 25 | 1260110 | Nut | 3 | |
| 26 | 1380141 | Foot | 2 | |
| 27 | 740290 | O-ring Ø 14x1,78 | 3 | |
| 28 | 1980740 | Plug 3/8" G brass | 3 | |
| 29 | 1263130 | Screw TE M8x12 | 4 | |
| 30 | 1260460 | Oil seal | 3 | KIT 2786 |
| 31 | 1780100 | Piston guide Ø 15 | 3 | |
| 32 | 770260 | O-ring Ø 23,52x1,78 | 3 | KIT 2741 |
| 33 | 1260440 | Water seal Ø 15 | 3 | KIT 2741 |
| 34 | 820361 | Plug 1/2" G brass | 1 | |
| 35 | 180101 | O-ring Ø 17,5x2 | 1 | |
| 36 | 1780380 | Head | 1 | |
| 37 | 1381550 | Washer | 8 | |
| 38 | 1322730 | Screw TCEI M6x60 | 8 | |
| 40 | 1321190 | Bearing | 1 | |
| 41 | 1321080 | Ring | 1 | |
| 46 | 1380520 | Key | 1 | |
| 47 | 1260750 | Oil seal | 1 | KIT 2786 |
| 57 | 1789200 | Head assembly | 1 | |
| 71 | 1260250 | Level gauge | 1 | |
| 72 | 1260430 | Ring | 1 | |
| 73 | 1780690 | Plate | 1 | |
| 74 | 1140450 | O-ring Ø 20,24x2,62 | 1 |
Motor
A 4-pole motor of at least 0.4 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 80a4 | 0.55 | 1420 | IEC 80 | IE1 | 1.5 | |
| RN 71c4 uprated | 0.55 | 1370 | IEC 71 | IE1 | 1.7 | |
| RNM 71c4 | 0.55 | 1390 | IEC 71 | Single-phase | 5.2 at 230 V | |
| RNM 80a4 | 0.55 | 1420 | IEC 80 | Single-phase | 4.8 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 71, 14 mm shaft (RN 71c4, RNM 71c4) No Annovi Reverberi flange listed for this motor.
- IEC 80, 19 mm shaft (RN 80a4, RNM 80a4) No Annovi Reverberi flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 71, 14 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 14 mm motor shaft to the pump shaft.
- IEC 80, 19 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 19 mm motor shaft to the pump shaft.