PumpLookupPump and motor part numbers
Mains Units

XMA plunger pump

XMA 3G25 N

Part number 7916

  • 11.4Flow, l/min
  • 170Pressure, bar
  • 1750Speed, rpm
  • 3.7Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi XMA pump

Specification

Flow
11.4 l/min
Pressure
170 bar
Speed
1750 rpm
Absorbed power
3.7 kW
Weight
6.5 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 1864Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2739Plunger kit, Ø15 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2740Support ring kit, Ø15 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2741Water seal kit, Ø15 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2786Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the XMA pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960160 O-ring Ø 17,86x2,626
2 1260160 Plug6
3 1269050 Complete valve6 KIT 1864
4 880830 O-ring Ø 15,54x2,626 KIT 1864
5 620301 Plug 1/8" G1
6 1780130 Ring Ø 153 KIT 2740
7 1260130 Water seal Ø 153 KIT 2741
8 1780090 Piston guide Ø 153
9 1780010 Pump body1
10 1266740 Oil seal1 KIT 2786
11 1260790 Ring1
12 1780550 Ring1
13 1780490 Bearing1
14 880130 Plug1
15 1780050 Pin3
16 1780510 O-ring Ø 106x31 KIT 2786
17 1200430 Screw TCEI M6x166
18 1789010 Cover1
19 1780040 Connecting-rod3
20 1780060 Piston3
21 480480 O-ring Ø 4,48x1,783
22 1260091 Plate3
23 1780070 Piston Ø 153 KIT 2739
24 1260100 Washer3
25 1260110 Nut3
26 1380141 Foot2
27 740290 O-ring Ø 14x1,783
28 1980740 Plug 3/8" G brass3
29 1263130 Screw TE M8x124
30 1260460 Oil seal3 KIT 2786
31 1780100 Piston guide Ø 153
32 770260 O-ring Ø 23,52x1,783 KIT 2741
33 1260440 Water seal Ø 153 KIT 2741
34 820361 Plug 1/2" G brass1
35 180101 O-ring Ø 17,5x21
36 1780020 Head1
37 1381550 Washer8
38 1322730 Screw TCEI M6x608
40 1321190 Bearing1
41 1321080 Ring1
41 1780170 Shaft1
46 1380520 Key1
47 1260750 Oil seal1 KIT 2786
57 1789201 Head assembly1
71 1260250 Level gauge1
72 1260430 Ring1
73 1780690 Plate1
74 1140450 O-ring Ø 20,24x2,621

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 3.7 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 112a4 41450IEC 112IE38.2  
RN 112a4 41430IEC 112IE18.5  
RN 100c4 uprated 41405IEC 100IE19.1  
RNM 112d4 41400IEC 112Single-phase22 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 100, 28 mm shaft (RN 100c4) No Annovi Reverberi flange listed for this motor.
  • IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.
  • IEC 112, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XMA pumps

XMA 3.5G22 NXMA 3.5G25 EXMA 3.5G25 NXMA 3G25 EXMA 4G0 NXMA 4G20 E