PumpLookupPump and motor part numbers
Mains Units

XMA-SS plunger pump

XMA-SS 2.5 G 15 E + F33

Part number 21436

  • 9.5Flow, l/min
  • 103Pressure, bar
  • 1750Speed, rpm
  • 1.8Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi XMA-SS pump

Specification

Flow
9.5 l/min
Pressure
103 bar
Speed
1750 rpm
Absorbed power
1.8 kW
Weight
7 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 2631Valve kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2644Water seal kit, Ø15 mm 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2739Plunger kit, Ø15 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2740Support ring kit, Ø15 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2787Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the XMA-SS pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960161 O-ring Ø 17,86x2,626
2 2580031 Plug6
3 2589050 Complete valve6 KIT 2631
4 880831 O-ring Ø 15,54x2,626 KIT 2631
6 1780130 Ring Ø 153 KIT 2740
7 1260131 Gasket3 KIT 2644
8 1781030 Ring3 KIT 2644
9 2580010 Pump body1
10 1266740 Oil seal1 KIT 2787
11 1260790 Ring1
12 1780550 Ring1
13 1780490 Bearing1
14 880130 Plug1
15 1780050 Pin3
16 1780510 O-ring Ø 106x31 KIT 2787
17 680560 Screw TCEI M6x166
18 2349010 Cover1
19 1780710 Connecting-rod3
20 1780060 Piston3
21 480482 O-ring Ø 4,48x1,783
22 2580120 Plate3
23 1780070 Piston Ø 153 KIT 2739
24 2340200 Washer3
25 2580110 Nut3
27 740290 O-ring Ø 14x1,782
28 2340350 Plug 3/8" G3
30 1260460 Oil seal3 KIT 2787
31 2580050 Piston guide Ø 153
32 770261 O-ring Ø 23,52x1,783 KIT 2644
33 1260441 Gasket3 KIT 2644
34 2340360 Plug 1/2" G1
35 180102 O-ring Ø 17,5x21
36 2580080 Head1
38 2580090 Screw TCEI M6x608
39 740291 O-ring Ø 14x1,781
40 1321190 Bearing1
41 1321080 Ring1
42 480671 Oil seal1 KIT 2787
43 820440 Screw M6x61
45 1781180 Shaft1
45 2589200 Head assembly1
65 180030 Screw TCEI M8x204
67 1780910 Flange1
71 1260250 Level gauge1
72 1260430 Ring1
73 1780690 Plate1
74 1140450 O-ring Ø 20,24x2,621

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 1.8 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 100a4 2.21455IEC 100IE35.9  
RN 100a4 2.21420IEC 100IE14.9  
RN 90Lb4 uprated 1.851410IEC 90LIE14.3  
RNM 90Lb4 1.851390IEC 90LSingle-phase13.2 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 90, 24 mm shaft (RN 90Lb4, RNM 90Lb4) No Annovi Reverberi flange listed for this motor.
  • IEC 100, 28 mm shaft (RNE 100a4, RN 100a4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 90, 24 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 24 mm motor shaft to the pump shaft.
  • IEC 100, 28 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 28 mm motor shaft to the pump shaft.

Other Annovi Reverberi XMA-SS pumps

XMA-SS 0.5 G15 E + F33XMA-SS 3 G 15 E + F33