PumpLookupPump and motor part numbers
Mains Units

XMV plunger pump

XMV 4G20 HONDA GX 270-QX-Q4

Part number 20237

  • 15.1Flow, l/min
  • 140Pressure, bar
  • 3400Speed, rpm
  • 0Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Annovi Reverberi XMV pump

Specification

Flow
15.1 l/min
Pressure
140 bar
Speed
3400 rpm
Weight
32 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 1864Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 2739Plunger kit, Ø15 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 2740Support ring kit, Ø15 mm 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 2741Water seal kit, Ø15 mm 

Oil seals1

Part numberDescriptionPer pumpSuppliers
KIT 2787Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the XMV pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960160 O-ring Ø 17,86x2,626
2 1260160 Plug6
3 1269050 Complete valve6 KIT 1864
4 880830 O-ring Ø 15,54x2,626 KIT 1864
5 620301 Plug 1/8" G1
6 1780130 Ring Ø153 KIT 2740
7 1260130 Water seal Ø 153 KIT 2741
8 1780090 Piston guide Ø 153
9 1780010 Pump body1
10 1266740 Oil seal1 KIT 2787
11 1260790 Ring1
12 1780550 Ring1
13 1780490 Bearing1
14 880130 Plug1
15 1780050 Pin3
16 1780510 O-ring Ø 106x31 KIT 2787
17 1200430 Screw TCEI M6x166
18 1789010 Cover1
19 1780040 Connecting-rod3
20 1780060 Piston3
21 480480 O-ring Ø 4,48x1,783
22 1260091 Plate3
23 1780070 Piston Ø 153 KIT 2739
24 1260100 Washer3
25 1260110 Nut3
27 740290 O-ring Ø 14x1,783
28 1980740 Plug 3/8" G brass3
30 1260460 Oil seal3 KIT 2787
31 1780100 Piston guide Ø 153
32 770260 O-ring Ø 23,52x1,783 KIT 2741
33 1260440 Water seal Ø 153 KIT 2741
34 820361 Plug 1/2" G brass1
35 180101 O-ring Ø 17,5x21
36 1781060 Head1
37 1381550 Washer8
38 1322730 Screw TCEI M6x608
40 1321190 Bearing1
41 1321080 Ring1
43 820440 Screw M6x61
44 2760290 Flange1
45 1780330 Shaft1
46 180030 Screw TCEI M8x204
47 480671 Oil seal1 KIT 2787
57 1789284 Head assembly1
71 1260250 Level gauge1
72 1260430 Ring1
73 1780690 Plate1
74 1140450 O-ring Ø 20,24x2,621
91 961900 Screw4

Motor

Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 0 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 63a2 0.182740IEC 63IE10.47  
RNM 63a2 0.182780IEC 63Single-phase1.3 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 63, 11 mm shaft (RN 63a2, RNM 63a2) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 63, 11 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 11 mm motor shaft to the pump shaft.

Other Annovi Reverberi XMV pumps

XMV 3.5G25 D+F25XMV 3.5G25 NXMV 3.5G30 D+F40 code 21128XMV 3G30 D+F25 code 20095XMV 3G30 D+F40 code 20111XMV 3G30 N code 20529XMV 4G22 NXMV 4G25 D+F40XMV 4G30 D+F40 code 20820XMV 4G30 N code 20849