PumpLookupPump and motor part numbers
Mains Units

XW plunger pump

XW 30.15 CR B&S VANGUARD 350447-1185-E1

Part number 20241

  • 30Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 0Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi XW pump

Specification

Flow
30 l/min
Pressure
150 bar
Speed
1450 rpm
Weight
53 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Oil seals3

Part numberDescriptionPer pumpSuppliers
KIT 2525Oil seal kit 
KIT 2571Oil seal kit 
KIT 2793Oil seal kit 

Exploded view

Annovi Reverberi exploded view of the XW pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 960770 Key1
2 961800 Ring1 KIT 2525, KIT 2571, KIT 2793
2 1941920 Ring1 KIT 2525, KIT 2571, KIT 2793
3 961790 Ring1 KIT 2525, KIT 2571, KIT 2793
4 320240 Ring1 KIT 2525, KIT 2571, KIT 2793
5 961781 Bearing1
6 320240 Ring1 KIT 2525
7 1389001 Pinion1
7 1389000 Pinion1
8 1140370 Plug1
9 1320910 Box1
10 881940 Screw TCEI M8x254
11 1983700 Level gauge 3/8" G1
11 1980290 Level gauge 3/8" G1
12 740290 O-ring Ø 14x1,782 KIT 2525, KIT 2571, KIT 2793
13 1980740 Plug 3/8" G brass2
14 160671 Screw TCEI M10x254
15 880280 Screw TCEI M6x181
16 1520590 O-ring Ø 107,67x1,781 KIT 2525, KIT 2571, KIT 2793
17 1940500 Spacer1
18 780230 Washer1
18 1322940 Gear1
19 1321230 Gear1
20 1320960 Gear1
20 1320920 Flange1
20 1320930 Flange1
20 650920 O-ring Ø 53,65x2,621
21 640030 O-ring Ø 59,99x2,621 KIT 2525, KIT 2571, KIT 2793
22 780330 Screw TCEI M6x204
23 1341020 Washer4
24 180432 Screw TE M8x204
24 390450 Screw TE M8x304
25 1260100 Washer4
26 1320940 Flange1
27 961770 Spacer4
28 961900 Screw4
29 651000 Screw4
30 1382540 Spacer1
31 1382530 Plug1 KIT 2793
32 1320990 Gasket1 KIT 2525, KIT 2571, KIT 2793
33 1380630 Key1

Motor

A 4-pole motor of at least 0 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 63a4 0.121345IEC 63IE10.44  
RNM 63c4 0.181400IEC 63Single-phase1.5 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 63, 11 mm shaft (RN 63a4, RNM 63c4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 63, 11 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 11 mm motor shaft to the pump shaft.

Other Annovi Reverberi XW pumps

XW 15.15 NXW 15.20 NXW 15.30 N code 20592XW 15.30 N+F62XW 21.20 N code 20174XW 21.25 N code 20058XW 21.25 N+F62XW 21.28 N code 21136XW 21.28 N+F60XW 26.12 N code 20175XW 26.15 N code 20176XW 26.20 N code 20059XW 26.20 N+F62XW 26.23 N code 20177XW 30.10 + F38XW 30.10 N code 20178XW 30.15 + F38XW 30.15 N code 20179XW 30.20 N DX code 20060XW 30.25 NXW 30.25 N+F60XW 30.25 N+F62