PumpLookupPump and motor part numbers
Mains Units

XWP plunger pump

XWP 50.15 N+F62

Part number 28109

  • 50Flow, l/min
  • 150Pressure, bar
  • 1450Speed, rpm
  • 15Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Annovi Reverberi XWP pump

Specification

Flow
50 l/min
Pressure
150 bar
Speed
1450 rpm
Absorbed power
15 kW
Weight
20 kg

Exploded view (PDF, Annovi Reverberi)

Kits

Valves1

Part numberDescriptionPer pumpSuppliers
KIT 42835Valve kit 

Plungers1

Part numberDescriptionPer pumpSuppliers
KIT 43444Plunger kit, Ø30 mm 

Other kits1

Part numberDescriptionPer pumpSuppliers
KIT 43445Oil seal kit 

Water seals1

Part numberDescriptionPer pumpSuppliers
KIT 43446Water seal kit, Ø30 mm 

Exploded view

Annovi Reverberi exploded view of the XWP pump, with position numbers
Annovi Reverberi's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Annovi Reverberi's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 850260 Screw TCEI M10x908
2 650530 Washer8
3 1943630 Plug6
4 390291 O-ring Ø 28,25x2,626
5 3669051 Complete valve3 KIT 42835
6 3669050 Complete valve3 KIT 42835
7 1943620 Head1
7 1943840 Head nickel-plated1
8 1943640 Support1
9 1271880 Screw2
10 1980740 Plug 3/8" G brass2
11 740290 O-ring Ø 14x1,782
12 1943650 Ring Ø 30,2x403 KIT 43446
13 1943670 Piston guide Ø 303
14 1943660 Gasket3 KIT 43446
15 1943700 Piston guide Ø 303
16 1943680 Gasket3 KIT 43446
17 1941640 Screw TE M6x403
18 1340600 Washer3
19 1943610 Piston Ø 303 KIT 43444
20 3660500 Ring3 KIT 43446
21 1383190 Plate3
22 1140490 O-ring Ø 37,82x1,783 KIT 43446
23 1940960 Piston3
24 1940060 Hub pin3
25 1941380 O-ring Ø 66,34x2,622 KIT 43445
26 1941390 Shim 0.05 mm
26 1941400 Shim 0.10 mm
26 1941410 Shim 0.19 mm
26 1941420 Shim 0.25 mm
27 1949011 Cover1
28 850370 Screw TCEI M8x168
29 1140410 Bearing2
30 1940051 Connecting-rod3
32 650250 Key1
33 1941330 Pump body1
34 1140370 Plug1
35 1260250 Level gauge1
36 1260430 Ring1
37 1940410 O-ring Ø 132x31 KIT 43445
38 1200430 Screw TCEI M6x166
39 1949010 Cover1
40 1780690 Plate1
41 1140450 O-ring Ø 20,24x2,621
42 820680 Ring1 KIT 43445
43 1943730 Ring3 KIT 43445
44 1940370 Foot2
45 1940380 Screw TCEI 10x184
46 200231 Washer4
47 1941240 Support1
51 1941290 Ring1
60 1949251 Head assembly1
60 1949257 Head assembly nickel-plated1
75 1941270 Level gauge1
76 100410 O-ring Ø 34,6x2,621
77 1941260 Plate1

Motor

A 4-pole motor of at least 15 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 160La4 151465IEC 160LIE330.5  
RN 160La4 151450IEC 160LIE130  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) No Annovi Reverberi flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Annovi Reverberi coupling listed: you need one for a 42 mm motor shaft to the pump shaft.

Other Annovi Reverberi XWP pumps

XWP 50.15 NXWP 50.20 NXWP 55.14 NXWP 55.14 N+F62XWP 60.13 NXWP 60.13 N+F60XWP 60.13 N+F62XWP 60.20 NXWP 65.12 NXWP 65.12 N+F62XWP 70.12 NXWP 70.12 N+F62XWP 70.15 NXWP 70.15 N+F60XWP 70.15 N+F62