CK plunger pump
CK 2216.1
Part number 73.8510.97.A
- 62Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 18.3Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 62 l/min (69 l/min at 60 Hz)
- Pressure
- 150 bar
- Speed
- 1450 rpm (1725 rpm at 60 Hz)
- Absorbed power
- 18.3 kW (20.4 kW at 60 Hz)
- Max water temperature
- 60 °C
- Plunger
- 30 mm
- Shaft
- Solid, Ø35 mm
- Inlet
- 1”1/4 BSP
- Outlet
- 3/4 BSP
- Weight
- 52 kg
- Oil
- 2.8 litres, SAE 75 - W 90
Kits
No kits are listed for this model. A supplier can look them up from the model CK 2216.1.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model CK 2216.1 and part number 73.8510.97.A.
Motor
A 4-pole motor of at least 18.3 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1725 rpm, where it takes 20.4 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 180Ma4 | 18.5 | 1465 | IEC 180M | IE1 | 37 | |
| RN 160Lb4 uprated | 18.5 | 1420 | IEC 160L | IE1 | 38 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RN 160Lb4) No Bertolini flange listed for this motor.
- IEC 180, 48 mm shaft (RN 180Ma4) No Bertolini flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft No Bertolini coupling listed: you need one for a 42 mm motor shaft to 35 mm pump shaft.
- IEC 180, 48 mm motor shaft No Bertolini coupling listed: you need one for a 48 mm motor shaft to 35 mm pump shaft.
Other Bertolini CK pumps
CK 1426.1CK 1433.1CK 1440.1CK 2010CK 2015CK 2220.1CK 2313CK 2580CK 2810