CR plunger pump
CR 8010
Part number 53.5000.97.3
- 79Flow, l/min
- 100Pressure, bar
- 1450Speed, rpm
- 15.4Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 79 l/min
- Pressure
- 100 bar
- Speed
- 1450 rpm
- Absorbed power
- 15.4 kW
- Max water temperature
- 60 °C
- Plunger
- 30 mm
- Shaft
- Solid, Ø35 mm
- Inlet
- 1”1/4 BSP
- Outlet
- 3/4 BSP
- Weight
- 25 kg
- Oil
- 1.69 litres, SAE 75 - W 90
Kits
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 539817973 | Radial ring kit 111 |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 539830973 | Valve kit 345 |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 539831973 | Seal kit 346, Ø30 mm plungers |
Parts list
For parts not covered by the kits above, ask a supplier and quote the model CR 8010 and part number 53.5000.97.3.
Motor
A 4-pole motor of at least 15.4 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 180Ma4 | 18.5 | 1465 | IEC 180M | IE1 | 37 | |
| RN 160Lb4 uprated | 18.5 | 1420 | IEC 160L | IE1 | 38 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RN 160Lb4) No Bertolini flange listed for this motor.
- IEC 180, 48 mm shaft (RN 180Ma4) No Bertolini flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft No Bertolini coupling listed: you need one for a 42 mm motor shaft to 35 mm pump shaft.
- IEC 180, 48 mm motor shaft No Bertolini coupling listed: you need one for a 48 mm motor shaft to 35 mm pump shaft.