KA plunger pump
KA 3215
Part number 06.4021.97.GU
- 33Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 9.6Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 33 l/min (38 l/min at 60 Hz)
- Pressure
- 150 bar
- Speed
- 1450 rpm (1725 rpm at 60 Hz)
- Absorbed power
- 9.6 kW (11.3 kW at 60 Hz)
- Max water temperature
- 74 °C
- Plunger
- 25 mm
- Shaft
- Solid, Ø24 mm
- Inlet
- 1 BSP
- Outlet
- 1/2 BSP
- Weight
- 19.3 kg
- Oil
- 1.4 litres, SAE 75 - W 90
Kits
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 069814973 | Radial ring kit 37 |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 069817973 | Valve kit 40 |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 069892973 | Seal kit 161, Ø25 mm plungers |
Parts list
For parts not covered by the kits above, ask a supplier and quote the model KA 3215 and part number 06.4021.97.GU.
Motor
A 4-pole motor of at least 9.6 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1725 rpm, where it takes 11.3 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma4 | 11 | 1475 | IEC 160M | IE3 | 22.4 | |
| RN 160Ma4 | 11 | 1450 | IEC 160M | IE1 | 22.4 | |
| RN 132Mc4 uprated | 11 | 1430 | IEC 132M | IE1 | 24 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Mc4) No Bertolini flange listed for this motor.
- IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Bertolini flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft No Bertolini coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.
- IEC 160, 42 mm motor shaft No Bertolini coupling listed: you need one for a 42 mm motor shaft to 24 mm pump shaft.