TAM plunger pump
TAM 1215
Part number 07.1018.97.A
- 12Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 3.4Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 12 l/min (14 l/min at 60 Hz)
- Pressure
- 150 bar
- Speed
- 1450 rpm (1725 rpm at 60 Hz)
- Absorbed power
- 3.4 kW (4 kW at 60 Hz)
- Max water temperature
- 85 °C
- Plunger
- 18 mm
- Shaft
- Solid, Ø24 mm
- Inlet
- 1/2 BSP
- Outlet
- 3/8 BSP
- Weight
- 10.6 kg
- Oil
- 0.7 litres, SAE 75 - W 90
Kits
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 049837973 | Radial ring kit 65 |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 069867973 | Valve kit 123 |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 079838973 | Seal kit 173, Ø18 mm plungers |
Parts list
For parts not covered by the kits above, ask a supplier and quote the model TAM 1215 and part number 07.1018.97.A.
Motor
A 4-pole motor of at least 3.4 kW drives this pump at 1450 rpm on 50 Hz. Single-phase motors are listed last, for a 230 V supply. On a 60 Hz supply a motor with the same poles turns it at 1725 rpm, where it takes 4 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 112a4 | 4 | 1450 | IEC 112 | IE3 | 8.2 | |
| RN 112a4 | 4 | 1430 | IEC 112 | IE1 | 8.5 | |
| RN 100c4 uprated | 4 | 1405 | IEC 100 | IE1 | 9.1 | |
| RNM 112d4 | 4 | 1400 | IEC 112 | Single-phase | 22 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 100, 28 mm shaft (RN 100c4) No Bertolini flange listed for this motor.
- IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) No Bertolini flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 100, 28 mm motor shaft No Bertolini coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
- IEC 112, 28 mm motor shaft No Bertolini coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.