TML plunger pump

TML 1328-HW

Part number 07.1034.97.A

13Flow, l/min
150Pressure, bar
1450Speed, rpm
3.8Power, kW

50 or 60 Hz The maker gives figures for both supplies.

Specification

Flow: 13 l/min (15 l/min at 60 Hz)
Pressure: 150 bar
Speed: 1450 rpm (1725 rpm at 60 Hz)
Absorbed power: 3.8 kW (4.5 kW at 60 Hz)
Max water temperature: 85 °C
Plunger: 18 mm
Shaft: Solid, Ø24 mm
Inlet: 1/2 BSP
Outlet: 3/8 BSP
Weight: 10 kg
Oil: 0.7 litres, SAE 75 - W 90

Data sheet (PDF, Bertolini)

Kits

Oil seals1

Part number	Description	Per pump	Suppliers
049837973	Radial ring kit 65

Valves1

Part number	Description	Per pump	Suppliers
069956973	Valve kit 249

Water seals1

Part number	Description	Per pump	Suppliers
079838973	Seal kit 173, Ø18 mm plungers

Parts list

For parts not covered by the kits above, ask a supplier and quote the model TML 1328-HW and part number 07.1034.97.A.

Motor

A 4-pole motor of at least 3.8 kW drives this pump at 1450 rpm on 50 Hz. Single-phase motors are listed last, for a 230 V supply. On a 60 Hz supply a motor with the same poles turns it at 1725 rpm, where it takes 4.5 kW. Order that motor wound for 60 Hz and rated for at least that power.

Motor	kW	rpm	Frame	Class	A at 400 V
RNE 112a4	4	1450	IEC 112	IE3	8.2
RN 112a4	4	1430	IEC 112	IE1	8.5
RN 100c4 uprated	4	1405	IEC 100	IE1	9.1
RNM 112d4	4	1400	IEC 112	Single-phase	22 at 230 V

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

IEC 100, 28 mm shaft (RN 100c4) No Bertolini flange listed for this motor.
IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) No Bertolini flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

IEC 100, 28 mm motor shaft No Bertolini coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
IEC 112, 28 mm motor shaft No Bertolini coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.