PumpLookupPump and motor part numbers
Mains Units

18 Frame block-style plunger pump

1810

  • 11.4Flow, l/min
  • 689Pressure, bar
  • 1500Speed, rpm
  • 15.32Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Cat Pumps 18 Frame block-style pump

Specification

Flow
11.4 l/min
Pressure
689 bar
Speed
1500 rpm
Absorbed power
15.32 kW
Plunger
11 mm
Shaft
Solid, Ø30 mm
Weight
27.2 kg

Data sheet (PDF, Cat Pumps)

Kits

Seal kits3

Part numberDescriptionPer pumpSuppliers
76810Seal kit, NBR (STD)1 
76811Seal kit, FPM (.0110)1 
76827Seal kit, PTFE (.0710)1 

Valves2

Part numberDescriptionPer pumpSuppliers
76820Valve kit, NBR (STD)1 
76852Valve kit, FPM (.0110)1 

Exploded view

Cat Pumps exploded view of the 18 Frame block-style pump, with position numbers
Cat Pumps' drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Cat Pumps' exploded view.

PosPart numberDescriptionQty
5 49651 Screw, HHC Sems (M8 x 20)8
8 134805 Cover, Bearing2
9 855043 Shim, Split, 2-Piece2
10 11340 O-Ring, Cover, Bearing2
11 43495 Seal, Oil, Crankshaft2
12 855044 Shim, Split, 2-Piece2
15 39060 Bearing, Roller2
20 48600 Rod, Connecting3
25 43494 Crankshaft, Dual-End (M30)1
32 43211 Cap, Oil Filler1
33 14177 O-Ring, Filler Cap1
37 92241 Gauge, Oil, Bubble with Gasket1
38 44428 Gasket, Flat, Flexible1
40 92542 Screw, HHC Sems (M6 x 20)4
48 25625 Plug, Drain ( 1/4" x 19 BSP)1
49 23170 O-Ring, Drain Plug1
50 133576 Cover, Rear1
51 44834 O-Ring, Rear Cover1
53 134889 Crankcase (Includes: 54)1
54 27488 Pin, Guide2
64 43507 Pin, Crosshead3
65 48892 Rod, Plunger, Short3
69 126592 Washer, Seal3
70 43500 Seal, Oil, Crankcase3
75 43506 Slinger, Barrier3
90 76595 Assembly, Plunger, M11 x 80, with Stainless Steel Holder3
95 31585 Stud, Plunger (M6 x 20)3
100 995590 Retainer, Seal3
106 76111 Seal, Low-Pressure3
110 76840 Block, Housing1
116 31545 Washer, Flat (M10)4
117 31695 Screw, HSH (M10 x 100)4
121 31565 Ring, Cylinder Sealing9
122 31485 O-Ring, Front Cylinder, Smaller3
123 31475 O-Ring, Rear Cylinder, Larger3
124 76490 Cylinder3
127 76310 Assembly, V-Packing with Bronze Cylinder Support3
134 76350 Valve, Inlet3
135 76115 Retainer, Inlet Spring3
136 31575 Spring, Inlet Valve3
164 76915 Seat, Ball Assembly with Ceramic Ball3
185 76885 Manifold, Inlet/Discharge, Block-Style1
188 31692 Screw, HSH (M10 x 140)8
250 855046 Protector, Shaft with 2-Stainless Steel Screws1
76850 Block, Housing, Flushed1
76495 Cylinder3

Motor

A 4-pole motor of at least 15.32 kW drives this pump at 1500 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 180Ma4 18.51465IEC 180MIE137  
RN 160Lb4 uprated 18.51420IEC 160LIE138  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RN 160Lb4) No Cat Pumps flange listed for this motor.
  • IEC 180, 48 mm shaft (RN 180Ma4) No Cat Pumps flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Cat Pumps coupling listed: you need one for a 42 mm motor shaft to 30 mm pump shaft.
  • IEC 180, 48 mm motor shaft No Cat Pumps coupling listed: you need one for a 48 mm motor shaft to 30 mm pump shaft.