36 Frame plunger pump
3631XD
- 136Flow, l/min
- 83Pressure, bar
- 800Speed, rpm
- 22.06Power, kW
Specification
- Flow
- 136 l/min
- Pressure
- 83 bar
- Speed
- 800 rpm
- Absorbed power
- 22.06 kW
- Plunger
- 40 mm
- Shaft
- Solid, Ø35 mm
- Weight
- 63.6 kg
Kits
Seal kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 32273 | Crankcase Oil Seal Removal and Installation Kit | 1 | |
| 32531 | Seal kit, NBR (STD) | 1 |
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 77078 | Valve kit, NBR (STD) | 2 |
Exploded view
Parts list
Positions are the balloon numbers on Cat Pumps' exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 5 | 96049 | Screw, HHC Sems (M10 x 25) | 8 |
| 8 | 134604 | Cover, Bearing | 2 |
| 9 | 815279 | Shim, Split, 2-Piece | 2 |
| 10 | 12398 | O-Ring, Bearing Cover | 2 |
| 11 | 13296 | Seal, Oil, Crankshaft | 2 |
| 12 | 855049 | Shim, Split, 2-Piece | 0 |
| 15 | 29326 | Bearing, Roller | 2 |
| 20 | 126725 | Rod, Connecting Assembly (Includes: 21, 22, 23) | 3 |
| 21 | 126749 | Washer, Locking | 3 |
| 22 | 126593 | Washer, Flat (M10.5) | 6 |
| 23 | 122045 | Screw, HH (M10 x 55) | 6 |
| 25 | 29325 | Crankshaft, Dual-End (M48) | 1 |
| 31 | 828710 | Protector, Oil Cap with Foam Gasket | 1 |
| 32 | 43211 | Cap, Oil Filler | 1 |
| 33 | 14177 | O-Ring, Oil Filler Cap | 1 |
| 34 | 126743 | Bolt, Eye (M12 x 1.75) (For Lifting Pump Only) | 1 |
| 37 | 92241 | Gauge, Oil, Bubble with Gasket | 1 |
| 38 | 44428 | Gasket, Flat Oil Gauge | 1 |
| 40 | 125753 | Screw, HHC Sems (M8 x 25) | 8 |
| 48 | 25625 | Plug, Drain (1/4" x 19 BSP) | 1 |
| 49 | 23170 | O-Ring, Drain Plug | 1 |
| 50 | 45936 | Cover, Rear | 1 |
| 51 | 16612 | O-Ring, Cover | 1 |
| 53 | 134784 | Crankcase Assembly (Includes: 54) | 1 |
| 54 | 27488 | Pins, Guide | 2 |
| 56 | 27790 | Pan, Oil | 1 |
| 59 | 92538 | Screw, HHC Sems (M6 x 16) | 2 |
| 64 | 43864 | Pin, Crosshead | 3 |
| 65 | 49166 | Rod, Plunger | 3 |
| 69 | 126587 | Washer, Oil Seal | 3 |
| 70 | 100488 | Seal, Oil, Crankcase | 3 |
| 75 | 43865 | Slinger, Barrier | 3 |
| 88 | 45676 | Washer, Keyhole (M16) | 3 |
| 90 | 43921 | Plunger (M40 x 145) | 3 |
| 95 | 89778 | Stud, Plunger Retainer (M10 x 135) | 3 |
| 96 | 20189 | Backup Ring, Plunger Retainer | 3 |
| 97 | 11345 | O-Ring, Plunger Retainer | 3 |
| 98 | 44085 | Gasket, Retainer | 3 |
| 99 | 44084 | Retainer, Plunger (M10) | 3 |
| 100 | 814279 | Retainer, Seal | 3 |
| 100 | 44119 | Retainer, Seal | 3 |
| 101 | 44112 | Wick, Long Tab | 3 |
| 106 | 44113 | Seal, Low-Pressure, with SS-Spring | 3 |
| 106 | 76398 | Seal, Low-Pressure, with SS-Spring | 3 |
| 107 | 45381 | Spacer, Low-Pressure Seal | 3 |
| 110 | 77365 | Manifold, Inlet | 1 |
| 112 | 11379 | O-Ring, Inlet Manifold | 3 |
| 117 | 44585 | Screw, HSH (M14 x 40) | 4 |
| 126 | 670235 | Backup Ring, Packing | 3 |
| 127 | 670234 | Packing, Square | 3 |
| 128 | 670331 | Washer, Spring | 3 |
| 129 | 670233 | Sleeve, Plunger | 3 |
| 141 | 49519 | Spring Large, Coil | 3 |
| 155 | 48860 | O-Ring, Packing, Spacer | 6 |
| 156 | 48362 | Backup Ring, Packing, Spacer | 12 |
| 157 | 670330 | Spacer, Packing | 3 |
| 162 | 48363 | Backup Ring, Valve Seat | 6 |
| 163 | 26142 | O-Ring, Seat | 6 |
| 164 | 44612 | Seat, Stepped | 6 |
| 166 | 44108 | Valve | 6 |
| 167 | 44109 | Spring | 6 |
| 168 | 44728 | Retainer, Spring | 6 |
| 170 | 44729 | Washer, Spring Retainer | 6 |
| 171 | 44644 | Coil Spring (70 kg), Valve Plug | 6 |
| 172 | 89827 | O-Ring, Valve Plug | 6 |
| 173 | 48364 | Backup Ring, Valve Plug | 12 |
| 174 | 670143 | Plug, Valve | 6 |
| 176 | 129759 | Plate | 2 |
| 177 | 32393 | Screw, HSH (M14 x 70) | 8 |
| 185 | 129754 | Manifold, Discharge | 1 |
| 188 | 89981 | Screw, HSH (M12 x 70) | 8 |
| 250 | 855042 | Protector, Shaft with Two (2) Screws, Lockwashers and Washers | 1 |
Motor
This pump needs 22.06 kW at 800 rpm, more than the largest motor of that speed listed here.
Flange
The flange depends on the motor, so it is chosen with the motor.
Coupling
The coupling depends on the motor shaft, so it is chosen with the motor.