BXD plunger pump
BXD 2220 G
Part number 6525 1006
- 8.4Flow, l/min
- 138Pressure, bar
- 3400Speed, rpm
- 2.5Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 8.4 l/min
- Pressure
- 138 bar
- Speed
- 3400 rpm
- Absorbed power
- 2.5 kW
- Shaft
- Hollow
- Weight
- 4.7 kg
Kits
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 5019.0250 | Oil seal kit | 1 |
Plungers2
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 5025.0071 | Valve kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Comet's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 3410.0319 | Injector Body Kit K EI M22x1,5 | 1 |
| 1 | 3410.0318 | Injector Body Kit K EI 3/8” | 1 |
| 2 | 3410.0311 | Injector Body Ø1,8 M22x1,5 | 1 |
| 2 | 3410.0316 | Injector Body Ø1,8 NPT | 1 |
| 3 | 1210.0040 | O-Ring Ø1,78x15,6 | 1 |
| 4 | 1210.0049 | O-Ring Ø1,78x12,42 | 1 |
| 5 | 1802.0197 | Check Valve Spring | 1 |
| 6 | 2409.0086 | Check Valve | 1 |
| 7 | 1210.0460 | O-Ring Ø | 1 |
| 8 | 2409.0091 | Check Valve Kit | 1 |
| 9 | 3218.0358 | Pump Manifold | 1 |
| 10 | 3609.0099 | Screw M8x45 | 5 |
| 11 | 2803.0435 | Chemical Coupling Kit | 1 |
| 12 | 1802.0180 | Spring | 1 |
| 13 | 3003.0026 | Ball | 1 |
| 14 | 2803.0424 | Chemical Coupling | 1 |
| 15 | 3202.0018 | Plug G1/8”Conic | 1 |
| 16 | 3200.0007 | Plug G3/8” | 1 |
| 17 | 3202.0018 | Plug G1/8”Conic | 1 |
| 18 | 1220.0058 | Suct/Del Valve Ass.y kit | 3 |
| 19 | 1802.0227 | Easy-Start Spring | 1 |
| 19 | 1210.0463 | O-Ring Ø2x6 | 1 |
| 20 | 3003.0033 | Ball 9/32” | 1 |
| 21 | 1210.0463 | O-Ring Ø2x6 | 1 |
| 22 | 3202.0319 | Easy-Start Plug | 1 |
| 23 | 1215.0402 | Regulation Valve ass.y | 1 |
| 23 | 1215.0403 | Regulation Valve ass.y | 1 |
| 24 | 1817.0064 | Knob | 1 |
| 25 | 0001.0530 | Eccentric Shaft 8° | 1 |
| 25 | 0001.0528 | Eccentric Shaft 9° | 1 |
| 26 | 1210.0462 | O-Ring Ø3,53x29,75 | 1 |
| 27 | 0438.0103 | Ball Bearing Ø40x80x18 | 1 |
| 27 | 0438.0076 | Ball Bearing Ø40x80x18 | 1 |
| 28 | 0031.0020 | Hollow Shaft G3/4” | 1 |
| 29 | 0019.0034 | Oil Seal Ø40x55x7 | 1 |
| 30 | 1210.0561 | O-Ring Ø3x85 | 1 |
| 31 | 3201.0027 | Cap G1/2” | 1 |
| 32 | 1210.0048 | O-Ring Ø2,62x20,24 | 1 |
| 33 | 3200.0122 | Oil Cap | 1 |
| 33 | 3200.0138 | Oil Cap | 1 |
| 34 | 3002.0711 | Support | 1 |
| 35 | 2811.0004 | Washer Ø8,4x14x1,6 | 4 |
| 36 | 3607.0119 | Exagonal Screw 5/16” UNF | 4 |
| 37 | 1201.0195 | Gasket Disk Ø28,3 | 1 |
| 38 | 0001.0543 | Eccentric Shaft 6°45’ | 1 |
| 39 | 1210.0462 | O-Ring Ø3,53x29,75 | 1 |
| 40 | 0438.0103 | Ball Bearing Ø40x80x18 | 1 |
| 41 | 0031.0020 | Hollow Shaft G3/4” | 1 |
| 42 | 0019.0034 | Oil Seal Ø40x55x7 | 1 |
| 43 | 1210.0561 | O-Ring Ø3x85 | 1 |
| 44 | 3201.0027 | Cap G1/2” | 1 |
| 45 | 1210.0048 | O-Ring Ø2,62x20,24 | 1 |
| 46 | 3200.0122 | Oil Cap | 1 |
| 47 | 3002.0676 | Support | 1 |
| 48 | 2811.0002 | Washer Ø10,5x20x2 | 4 |
| 49 | 3607.0168 | Exagonal Screw 3/8” UNC | 4 |
| 50 | 1201.0195 | Gasket Disk Ø28,3 | 1 |
| 51 | 0436.0017 | Bearing Ø45x65x14 | 1 |
| 52 | 2816.0088 | Piston Washer | 1 |
| 53 | 0009.0267 | Ring | 3 |
| 54 | 1802.0276 | Spring | 3 |
| 55 | 2409.0140 | Piston Ø14 | 3 |
| 55 | 2409.0141 | Piston Ø14 | 3 |
| 56 | 0403.0179 | Pump Crankcase | 1 |
| 57 | 1209.0117 | Gasket Ø13x20x2 | 1 |
| 58 | 3200.0102 | Oil Discharge Cap G1/4” | 1 |
| 59 | 1210.0146 | O-Ring Ø1,78x2,9 | 2 |
| 60 | 0019.0182 | Ring Ø14x22x5/7 | 3 |
| 61 | 3202.0295 | Suction Valve Plug | 3 |
| 62 | 0009.0224 | Ring | 3 |
| 63 | 1210.0093 | O-Ring Ø1,78x14 | 3 |
| 64 | 3202.0294 | Suction Valve Plug Kit | 3 |
| 65 | 1220.0058 | Suct/Del Valve Ass.y kit | 6 |
| 66 | 3609.0005 | Screw M8x20 | 4 |
| 67 | 1241.0057 | Low Pressure Packing Ø14x22x4 | 3 |
| 68 | 0009.0309 | Packing Retainer | 3 |
| 69 | 1210.0071 | O-Ring Ø1,78x20,35 | 3 |
| 70 | 0009.0369 | Anti-extr Ring | 3 |
| 70 | 0009.0387 | Anti-extr Ring Ø14x22x1,2 | 3 |
| 71 | 1241.0059 | Packing + Ring Ø14 | 3 |
| 72 | 1210.0049 | O-Ring Ø1,78x12,42 | 6 |
| 73 | 3009.0170 | Valve Seat | 6 |
| 74 | 3604.0028 | Suct./Del. Valve | 6 |
| 75 | 1802.0227 | Suct./Del. Valve Spring | 6 |
| 76 | 1205.0037 | Suct./Del. Valve Cage | 6 |
| 77 | 1210.0151 | O-Ring Ø1,78x17,17 | 3 |
| 78 | 3202.0236 | Plug | 3 |
| 79 | 3622.0026 | Screw M6x8 | 1 |
Motor
This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 2.5 kW.
Flange
None needed: the pump fits straight onto a hollow-shaft motor.
Coupling
None needed: the pump fits straight onto a hollow-shaft motor.
Other Comet BXD pumps
BXD 2020 EBXD 2220 GBXD 2520 EBXD 2525 GBXD 2527 GBXD 2527 GBXD 3020 EBXD 3020 GBXD 3020 GBXD 3025 GBXD 3025 G