PumpLookupPump and motor part numbers
Mains Units

FWD2 plunger pump

FWD2 5040 G

Part number 6412 0400

  • 19.2Flow, l/min
  • 276Pressure, bar
  • 3400Speed, rpm
  • 11Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Comet FWD2 pump

Specification

Flow
19.2 l/min
Pressure
276 bar
Speed
3400 rpm
Absorbed power
11 kW
Shaft
Hollow
Weight
9 kg

Data sheet (PDF, Comet)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
2409.0073Plunger kit1 

Oil seals1

Part numberDescriptionPer pumpSuppliers
5019.0045Oil seal kit1 

Water seals1

Part numberDescriptionPer pumpSuppliers
5019.0247Water seal kit1 

Valves1

Part numberDescriptionPer pumpSuppliers
5025.0025Valve kit1 

Exploded view

Comet exploded view of the FWD2 pump, with position numbers
Comet's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Comet's exploded view.

PosPart numberDescriptionQty
1 2811.0084 Washer Ø16,7x22x1,51
2 3200.0007 Cap G3/8”1
3 3202.0015 Cap G1/2”1
4 2811.0086 Washer Ø21,2x27x1,51
5 3218.0312 Manifold Ø181
6 3200.0004 Cap G1/4”1
7 3609.0170 Screw M8x808
8 1210.0046 O-Ring Ø2,62x17,136
9 3009.0087 Suct./Del. Valve Seat6
10 3604.0017 Suct./Del. Valve6
11 1802.0177 Suct./Del. Valve Spring6
12 1205.0043 Suct./Del. Valve Cage6
13 1220.0072 Suct./Del. Valve Ass.y Kit6
14 1210.0048 O-Ring6
15 3202.0314 Cap + O-ring6
16 3609.0157 Screw M8x184
17 1009.0242 Flange1
18 1210.0451 O-Ring Ø2x241
19 3201.0026 Oil Indicator1
20 3019.0033 Outer Seeger Ø281
21 1210.0448 O-Ring Ø2x701
22 0440.0031 Roller Bearing Ø30x62x21,251
23 0403.0205 Pump Crankcase1
24 3200.0051 Oil Dipstick1
25 0600.0054 Special Bolt3
26 2811.0082 Washer Ø8,2x17x1,53
27 0202.0022 Ceramic Bushing Ø183
28 1210.0039 O-Ring Ø1,78x7,663
29 0009.0170 Anti-Extr. Ring3
30 2812.0094 Washer3
31 2409.0048 Piston Guides3
32 3011.0016 Gudgeon Pin Ø10x293
33 0205.0044 Con. Rod Assembly3
34 3019.0033 Outer Seeger Ø281
35 3201.0026 Oil Indicator1
36 1210.0451 O-Ring Ø2x241
37 1210.0468 O-Ring Ø3x1081
38 0402.0169 Crankcase Cover1
39 3609.0030 Screw M5x206
40 1210.0441 O-Ring Ø2x141
41 3200.0007 Cap G3/8”1
42 0019.0128 Oil Seal Ø20x28x53
43 1210.0156 O-Ring Ø1,78x31,473
44 0009.0757 Packing Retainer Ø183
45 1241.0022 Packing Ø183
46 0009.0193 Packing Head Ring Ø183
47 0009.0216 Packing Retainer Ø183
48 0009.0214 Back Ring Ø183
49 1241.0022 Packing Ø183
50 0009.0193 Packing Head Ring Ø183
51 0001.0949 Hollow Shaft Ø1”1
52 0440.0011 Roller Bearing Ø40x68x191
53 1210.0617 O-Ring Ø2x761
54 0019.0052 Oil Seal Ø40x52x71
55 0601.0340 Shim Ø1
55 0601.0341 Shim Ø1
55 0601.0342 Shim Ø1
55 0601.0343 Shim Ø1
56 3607.0119 Hexagonal Screw 5/16”24 x1”4
56 3607.0168 Hexagonal Screw 3/8”16 x1”4
57 2811.0098 Washer Ø10,5x18x24
58 3016.1027 Flange1
59 3609.0157 Screw M8x184
61 0001.0609 Hollow Shaft Ø1”1/81
61 0001.0610 Hollow Shaft Ø1”1/81
62 0440.0011 Roller Bearing Ø40x68x191
63 1210.0617 O-Ring Ø2x761
64 0019.0052 Oil Seal Ø40x52x71
65 0601.0340 Shim Ø1
65 0601.0341 Shim Ø1
65 0601.0342 Shim Ø1
65 0601.0343 Shim Ø1
66 3607.0119 Hexagonal Screw 5/16”24 x1”4
66 3607.0168 Hexagonal Screw 3/8”16 x1”4
67 2811.0098 Washer Ø10,5x18x24
68 3016.0051 Flange1
69 3609.0157 Screw M8x184

Motor

This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 11 kW.

Flange

None needed: the pump fits straight onto a hollow-shaft motor.

Coupling

None needed: the pump fits straight onto a hollow-shaft motor.

Other Comet FWD2 pumps

FWD2 4530 GFWD2 4540 GFWD2 5030 GFWD2 5540 G