PumpLookupPump and motor part numbers
Mains Units

RWS plunger pump

RWS 5030 S

Part number 6518 0600

  • 18.6Flow, l/min
  • 207Pressure, bar
  • 1750Speed, rpm
  • 7.2Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Comet RWS pump

Specification

Flow
18.6 l/min
Pressure
207 bar
Speed
1750 rpm
Absorbed power
7.2 kW
Shaft
Solid, Ø24 mm
Weight
11.2 kg

Data sheet (PDF, Comet)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
2409.0145Plunger kit1 

Water seals1

Part numberDescriptionPer pumpSuppliers
5019.0672Water seal kit1 

Oil seals1

Part numberDescriptionPer pumpSuppliers
5019.0679Oil seal kit1 

Valves2

Part numberDescriptionPer pumpSuppliers
5025.0011Valve kit1 
5025.0025Valve kit1 

Exploded view

Comet exploded view of the RWS pump, with position numbers
Comet's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Comet's exploded view.

PosPart numberDescriptionQty
1 2811.0084 Washer Ø16,7x22x1,51
2 3200.0007 Plug G3/8”1
3 3202.0015 Plug G1/2”1
4 2811.0086 Washer Ø21,2x27x1,51
5 3218.0373 Pump Manifold Ø201
6 3609.0039 Screw M8x708
7 3200.0004 Plug G1/4”2
8 1210.0046 O-Ring Ø2,62x17,136
9 3009.0087 Suction/Delivery Valve Seat6
10 3604.0017 Suction/Delivery Valve6
11 1802.0177 Suct./Delivery Valve Spring6
12 1205.0025 Suction/Delivery Valve Basse Cage portate Low6
12 1205.0043 Suction/Delivery Valve Alte Cage - High6
13 1220.0030 Suction/Delivery Valve Basse portate Low6
13 1220.0072 Suction/Delivery Valve Alte - High6
14 1210.0048 O-Ring Ø2,62x20,246
15 3202.0315 Valve Plug Kit + O-ring6
16 0403.0168 Pump Crankcase Albero Maschio Solid1
16 0403.0175 Pump Crankcase Albero Femmina - Hollow Shaft1
17 3609.0157 Screw M8x184
18 1009.0242 Flange1
19 1210.0451 O-Ring Ø2x241
20 3201.0026 Oil Level Plug1
21 3019.0033 Seeger Ø281
22 1210.0448 O-Ring Ø2x701
23 0440.0031 Roller Bearing Ø30x62x21,251
24 3200.0051 Oil Dipstick1
25 0600.0054 Special Bolt3
26 2811.0082 Washer Ø8,4x16x1,53
27 0202.0024 Ceramic Bushing Ø203
28 2812.0094 Washer3
29 1210.0039 O-Ring Ø1,78x7,663
30 0009.0170 Anti-Extr. Ring3
31 2409.0139 Piston3
32 3011.0016 Gudgeon Pin Ø10x293
33 0205.0044 Connecting Rod3
34 1210.0369 O-Ring Ø3,53x117,11
35 0402.0307 Cover1
36 3609.0030 Screw M5x206
37 1210.0048 O-Ring Ø2,62x20,241
38 3201.0027 Oil Level Plug G1/21
39 3200.0007 Plug G3/8”1
40 1210.0441 O-Ring Ø2x141
41 0019.0128 Oil Seal Ø20x28x53
42 1210.0156 O-Ring Ø3
43 0009.0353 Packing Retainer Ø203
44 1241.0080 Packing Ø203
44 1241.0074 Packing Ø183
45 0009.0352 Packing Retainer Ø203
46 1241.0079 Packing Ø203
50 0001.0577 Solid Crankshaft Ø241
50 0001.0574 Solid Crankshaft Ø241
50 0001.0569 Solid Crankshaft Ø241
51 1602.0013 Key 8x7x301
52 0440.0031 Roller Bearing Ø30x62x21,251
53 0601.0304 Spacer sp.1
53 0601.0305 Spacer sp.1
53 0601.0306 Spacer sp.1
53 0601.0307 Spacer sp.1
54 1210.0448 O-Ring Ø2x701
55 1009.0241 Flange1
56 0019.0007 Oil Seal Ø25x52x71
57 3609.0157 Screw M8x184
61 0440.0011 Roller Bearing Ø40x68x191
62 1210.0617 O-Ring Ø2x761
63 0601.0340 Spacer sp.1
63 0601.0341 Spacer sp.1
63 0601.0342 Spacer sp.1
63 0601.0343 Spacer sp.1
64 0019.0052 Oil Seal Ø40x52x71
65 3016.0051 Flange NEMA 1841
66 3607.0201 Screw 1/2” 13UNCx1”1/44
67 3609.0002 Screw M8x254
70 0001.0687 Hollow Shaft Ø251
70 0001.0688 Hollow Shaft Ø251
71 0440.0011 Roller Bearing Ø40x68x191
72 1210.0617 O-Ring Ø2,0x761
73 0601.0340 Spacer sp.1
73 0601.0341 Spacer sp.1
73 0601.0342 Spacer sp.1
73 0601.0343 Spacer sp.1
74 0019.0052 Oil Seal Ø40x52x71
75 3016.1023 Flange Honda1
75 3016.1022 Flange MITSUBISHI- ROBIN1
76 3609.0002 Screw M8x254

Motor

Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 7.2 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RNE 132Ma4 7.51465IEC 132MIE315.3  
RN 132Ma4 7.51440IEC 132MIE115.3  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) No Comet flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 132, 38 mm motor shaft No Comet coupling listed: you need one for a 38 mm motor shaft to 24 mm pump shaft.

Other Comet RWS pumps

RWS 3030 ERWS 3040 ERWS 3530 ERWS 3540 SRWS 4022 SRWS 4030 ERWS 4030 SRWS 4040 ERWS 4040 SRWS 4045 SRWS 4530 ERWS 4540 SRWS 4545 SRWS 5030 ERWS 5035 ERWS 5040 SRWS 5040 SRWS 5045 SRWS 5530 ERWS 5530 SRWS 5535 SRWS 6035 SRWS 6040 SRWS 6045 SRWS 6520 SRWS 7020 SRWS 8022 SRWS 8522 SRWS 9518 SRWS 10018 S