PumpLookupPump and motor part numbers
Mains Units

VRX plunger pump

VRX 2522 G

Part number 6511 0005

  • 9.5Flow, l/min
  • 152Pressure, bar
  • 3400Speed, rpm
  • 3.1Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Comet VRX pump

Specification

Flow
9.5 l/min
Pressure
152 bar
Speed
3400 rpm
Absorbed power
3.1 kW
Shaft
Hollow
Weight
3.3 kg

Data sheet (PDF, Comet)

Kits

Water seals1

Part numberDescriptionPer pumpSuppliers
5019.0668Water seal kit1 

Valves1

Part numberDescriptionPer pumpSuppliers
5026.0257Valve kit1 

Exploded view

Comet exploded view of the VRX pump, with position numbers
Comet's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Comet's exploded view.

PosPart numberDescriptionQty
1 1215.0342 Regulation Valve Kit1
2 3202.0288 Plug M61
3 1802.0219 Regulation Valve Spring1
4 2811.0117 Washer1
5 3605.0104 Special Screw1
6 1210.0392 O-Ring Ø2x161
7 3021.0034 Elastic Pin Ø2x141
8 1210.0470 O-Ring Ø2x131
9 0009.0272 Ring Ø6x9x1,21
10 1210.0055 O-Ring Ø1,78x6,071
11 0015.0192 Valve Rod1
12 1210.0465 O-Ring Ø1,78x8,731
13 0009.0112 Back Up Ring Ø108x1,78x8,71
14 3009.0136 Regulation Valve Seat1
16 1210.0170 O-Ring Ø1,78x10,821
17 3003.0032 Ball 3/8” (Ø9,525)1
18 3609.0191 Screw M8x603
19 2811.0004 Washer Ø8,4x14x1,63
20 3218.0351 Brass Pump Manifold1
21 2800.0511 Straight Hose Tail Kit1
22 1223.0108 Wing Nut G3/4”1
23 2803.0395 Quick Coupler G1/2”1
24 1002.0158 Suction Filter1
25 2801.0079 Thermo Valve Cover1
26 1210.0218 O-Ring Ø2x111
27 0424.0420 Thermo Valve Body1
28 1210.0557 O-Ring Ø3x91
29 3230.0031 Sensor1
30 1802.0217 Spring1
31 5026.0276 Thermo Valve kit1
32 1220.0054 Delivery Valve2
33 3202.0279 Plug3
34 1220.0055 Delivery Valve1
35 2800.0104 Detergent Straight Hose Tail1
36 1210.0465 O-Ring Ø1,78x8,731
37 1210.0466 O-Ring Ø1,5x61
38 3003.0033 Ball 9/32”1
39 1802.0216 Spring1
40 0204.0051 Bushing1
41 1241.0068 Packing Ø14x22x5,53
42 0009.0369 Anti-Extr. Ring3
43 0009.0270 Packing Retainer3
44 0601.0308 Oil seal Spacer3
45 0019.0111 Oil Seal Ø14x22x5/73
46 1802.0213 Piston Spring3
47 5026.0260 Piston Kit3
48 2409.0196 Piston Ø143
49 0009.0267 Ring3
50 1210.0612 O-Ring Ø2,62x71,121
51 2432.0029 Pump Crankcase1
52 1220.0054 Delivery Valve3
53 5026.0262 Check Valve Kit1
54 1210.0463 O-Ring Ø2x61
55 2409.0102 Check Valve1
56 1802.0218 Spring1
57 1210.0465 O-Ring Ø1,78x8,731
58 3000.0714 Detergent Injector Ø1,91
59 1210.0170 O-Ring Ø1,78x10,821
60 3410.0330 Detergent Injector Kit1
62 0436.0032 Axial Ball Bearing Ø40x60x141
63 0001.0460 Throu-Eccentric Shaft 9°1
64 1210.0394 O-Ring Ø2x251
65 0438.0084 Ball Bearing Ø30x62x161
66 0031.0012 Pump Crankshaft 3/4”1
67 0019.0112 Oil Seal Ø35x47x71
68 3200.0010 Oil Drain Plug G1/4”1
69 1209.0117 Gasket Ø13x20x21
70 0403.0159 Pump Crankcase con Scarico with discharge1
71 3016.0042 Support1
71 3625.0062 Screw M6x204
73 3200.0071 Plug1
74 1210.0093 O-Ring Ø1,78x141
75 2417.0064 Extension Brass1
76 1210.0441 O-Ring Ø2x141

Motor

This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 3.1 kW.

Flange

None needed: the pump fits straight onto a hollow-shaft motor.

Coupling

None needed: the pump fits straight onto a hollow-shaft motor.

Other Comet VRX pumps

VRX 2017 V 46,0VRX 2017 V 80,0VRX 2022 V 46,0VRX 2022 V 80,0VRX 2522 V 80,0VRX 2524 GVRX 2527 G