PumpLookupPump and motor part numbers
Mains Units

ZWD-K plunger pump

ZWD-K 3535 G

Part number 6305 1750

  • 13Flow, l/min
  • 240Pressure, bar
  • 3400Speed, rpm
  • 5.6Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Comet ZWD-K pump

Specification

Flow
13 l/min
Pressure
240 bar
Speed
3400 rpm
Absorbed power
5.6 kW
Shaft
Hollow
Weight
7.9 kg

Data sheet (PDF, Comet)

Kits

Plungers1

Part numberDescriptionPer pumpSuppliers
2409.0071Plunger kit1 

Water seals2

Part numberDescriptionPer pumpSuppliers
5019.0064Water seal kit1 
5019.0065Seal kit1 

Valves1

Part numberDescriptionPer pumpSuppliers
5025.0011Valve kit1 

Exploded view

Comet exploded view of the ZWD-K pump, with position numbers
Comet's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Comet's exploded view.

PosPart numberDescriptionQty
1 3200.0007 Cap G3/8”1
2 2811.0084 Washer Ø16,7x22x1,51
3 3202.0015 Cap G1/2”1
4 2811.0086 Washer Ø21,2x27x1,51
5 3609.0014 Screw M8x558
6 3202.0018 Plug G1/8”1
7 2803.0395 Special Coupling G1/2”1
9 1002.0158 Water Filter1
10 2409.0123 Check Valve Kit1
11 1210.0460 O-Ring Ø2,4x4,31
12 2409.0122 Check Valve1
13 1802.0197 Spring1
14 1210.0402 O-Ring1
15 1210.0398 O-Ring1
16 3410.0287 Injector Body Kit Ø1,8 NPT1
17 1802.0180 Detergent Spring1
18 3003.0026 Detergent Ball1
19 2803.0424 Detergent Coupling1
20 1215.0404 Reg. Valve Kit + Seat1
21 1817.0053 Pressure knob1
22 1220.0030 Suct./Del. Valve Ass.y kit6
23 1210.0046 O-Ring Ø2,62x17,136
24 3009.0087 Suct./Del. Valve Seat6
25 3604.0017 Suct./Del. Valve6
26 1802.0177 Spring6
27 1205.0025 Suct./Del. Valve Cage6
28 1210.0048 O-Ring Ø2,62x20,246
29 3202.0312 Plug + O-Ring6
30 3609.0088 Screw M5x103
31 1004.0012 Crankcase Flange1
32 0402.0329 Alluminum Cover1
33 1210.0386 O-Ring Ø3,53x44,041
34 3019.0011 Outer Seeger Ø201
35 0009.0275 Spacer Ø41x51,8x0,51
36 0438.0069 Ball Bearing Ø20x52x151
37 0403.0141 Pump Crankcase1
38 3200.0051 Oil Dipstick1
39 0600.0048 Special Bolt3
40 2811.0080 Washer Ø8,2x14x1,53
41 0202.0020 Ceramic Bushing Ø153
42 2812.0038 Washer3
43 1210.0055 O-Ring Ø1,78x6,073
44 2409.0044 Piston Guides3
45 3011.0014 Gudgeon Pin3
46 0205.0050 Con. Rod Assembly Bronze3
47 3019.0033 Outer Seeger Ø281
48 3201.0026 Oil Indicator1
49 1210.0333 O-Ring Ø1,78x23,521
50 1210.0621 O-Ring Ø3x941
51 0402.0220 Cover1
52 3609.0180 Screw M6x554
53 3609.0032 Screw M6x204
54 2811.0098 Washer Ø10,5x18x24
55 3016.0023 Flange 1”1
56 3607.0119 Hexagonal Screw 5/16”24 x 1”4
56 3607.0168 Hexagonal Screw 3/8”16 x 1”4
57 0019.0102 Oil Seal Ø40x62x71
58 3020.0012 Inner Seeger Ø621
59 0204.0038 Bushing1
60 0437.0045 Bearing Ø40x47x161
61 0001.0386 Eccentric Shaft 1”1
62 1210.0441 O-Ring Ø2x141
63 3200.0007 Cap G3/8”1
65 1210.0223 O-Ring Ø1,78x26,73
65 0019.0095 Oil Seal Ø15x24x53
66 0009.0222 Packing Retainer Ø153
67 1241.0030 Packing Ø15x22x5,53
68 0009.0223 Back Ring Ø153
69 1241.0065 Packing Ø153
70 0009.0196 Packing Head Ring Ø153
71 3218.0321 Brass Pump Manifold Ø151
72 5033.0010 Easy Start Kit1
74 1210.0463 O-Ring Ø2x61
75 3003.0033 Easy Start Ball Ø9/32”1
76 1210.0463 O-Ring Ø2x61
77 1802.0277 Easy StartSpring1

Motor

This pump has a hollow shaft. It fits straight onto the shaft of a hollow-shaft motor or engine, so there is no flange or coupling between them. You need a hollow-shaft motor of at least 5.6 kW.

Flange

None needed: the pump fits straight onto a hollow-shaft motor.

Coupling

None needed: the pump fits straight onto a hollow-shaft motor.

Other Comet ZWD-K pumps

ZWD-K 3030 GZWD-K 3035 GZWD-K 3530 GZWD-K 3540 GZWD-K 4030 GZWD-K 4035 GZWD-K 4040 G