FOG plunger pump
FOG0210CR
Part number 1.099-274.0
- 2Flow, l/min
- 100Pressure, bar
- 1450Speed, rpm
- 0.4Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 2 l/min (2.4 l/min at 60 Hz)
- Pressure
- 100 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 0.4 kW (0.5 kW at 60 Hz)
- Max water temperature
- 65 °C
- Shaft side
- Right
- Shaft
- Solid
- Inlet
- G 3/8
- Outlet
- G 3/8
- Weight
- 5.6 kg
- Oil
- 0.25 litres, SAE 10W40
Kits
Extraordinary maintenance5
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-840.0 | Plunger | 3 | |
| 1.099-841.0 | Plunger oil seals | 1 | |
| 1.099-842.0 | Complete manifold | 1 | |
| 1.904-249.0 | Valve plug assembly | 6 | |
| 1.904-461.0 | Flange KIT | 1 |
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.905-617.0 | Complete valve kit | 1 | |
| 1.905-618.0 | Complete seal packing | 1 |
Optional parts1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 9.853-424.0 | Threaded brass plug G1/4 | 1 |
Tools1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 9.853-525.0 | Tool-kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.850-371.0 | Crankcase | 1 | |
| 2 | Kit only | Plunger oil seal Ø15 x 24 x 5 | 3 | 1.099-841.0 |
| 3 | Kit only | Pressure ring | 3 | 1.099-842.0, 1.905-618.0 |
| 4 | Kit only | Or 2100 1,78 x 25,12 | 3 | 1.099-842.0, 1.905-618.0 |
| 5 | Kit only | Low pressure seal | 3 | 1.099-842.0, 1.905-618.0 |
| 6 | Kit only | Intermediate ring | 3 | 1.099-842.0, 1.905-618.0 |
| 7 | Kit only | High pressure seal | 3 | 1.099-842.0, 1.905-618.0 |
| 8 | Kit only | Support ring | 3 | 1.099-842.0, 1.905-618.0 |
| 9 | Kit only | Brass plug G3/8 | 1 | 1.099-842.0 |
| 10 | Kit only | Copper washer G3/8 | 1 | 1.099-842.0 |
| 11 | Kit only | Manifold housing | 1 | 1.099-842.0 |
| 12 | Kit only | Or 2062 - Ø1,78 x 15,60 | 6 | 1.099-842.0, 1.905-617.0 |
| 13 | Kit only | Valve assembly | 6 | 1.099-842.0, 1.905-617.0 |
| 14 | Kit only | Or 2075 - Ø1,78 x 18.77 | 6 | 1.099-842.0, 1.904-249.0, 1.905-617.0 |
| 15 | Kit only | Manifold plug | 6 | 1.099-842.0, 1.904-249.0 |
| 16 | 9.851-486.0 | Screw M10 x 45 | 2 | |
| 17 | 9.851-154.0 | Lock-washer | 2 | |
| 18 | Kit only | Valve seat | 6 | 1.099-842.0, 1.905-617.0 |
| 19 | Kit only | Valve plate | 6 | 1.099-842.0, 1.905-617.0 |
| 20 | Kit only | Valve plate | 6 | 1.099-842.0, 1.905-617.0 |
| 21 | Kit only | Valve cage | 6 | 1.099-842.0, 1.905-617.0 |
| 22 | 9.851-205.0 | Seeger Ø52 UNI 7437 | 2 | |
| 23 | 9.850-812.0 | Sight glass | 1 | |
| 24 | 9.850-704.0 | Or 3187 52,54 x 47,3 | 1 | |
| 25 | 9.851-285.0 | Oil dip stick | 1 | |
| 26 | 9.851-199.0 | Seeger Ø20 UNI7435 | 1 | |
| 27 | 9.850-461.0 | Ball bearing 6304-20 x 52 x 15 | 1 | |
| 28 | 9.850-313.0 | Connecting rod | 3 | |
| 29 | 9.851-216.0 | Connecting rod pin | 3 | |
| 30 | 9.850-103.0 | Plunger rod | 3 | |
| 31 | Kit only | Copper spacer | 3 | 1.099-840.0 |
| 32 | Kit only | Plunger | 3 | 1.099-840.0 |
| 33 | Kit only | Copper spacer | 3 | 1.099-840.0 |
| 34 | Kit only | Screw M6 x 60 | 3 | 1.099-840.0 |
| 35 | 9.850-218.0 | Crankshaft Ø19 | 1 | |
| 36 | Kit only | Or 3400 101.27XØ2.62 | 1 | 1.904-461.0 |
| 37 | Kit only | Bearing NK35/20 | 1 | 1.904-461.0 |
| 38 | Kit only | Flange B14 IEC80 | 1 | 1.904-461.0 |
| 39 | Kit only | Oil seal 35 x 45 x 7 | 1 | 1.904-461.0 |
| 40 | 9.851-468.0 | Screw M8 x 25 UNI 5931 | 4 | |
| 41 | 9.851-152.0 | Lock-washer | 4 | |
| 42 | 9.851-301.0 | Crankcase plug | 1 | |
| 43 | Kit only | Plunger oil seal spacer | 3 | 1.099-842.0, 1.905-618.0 |
Motor
A 4-pole motor of at least 0.4 kW drives this pump at 1450 rpm on 50 Hz. Single-phase motors are listed last, for a 230 V supply. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 0.5 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 80a4 | 0.55 | 1420 | IEC 80 | IE1 | 1.5 | |
| RN 71c4 uprated | 0.55 | 1370 | IEC 71 | IE1 | 1.7 | |
| RNM 71c4 | 0.55 | 1390 | IEC 71 | Single-phase | 5.2 at 230 V | |
| RNM 80a4 | 0.55 | 1420 | IEC 80 | Single-phase | 4.8 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 71, 14 mm shaft (RN 71c4, RNM 71c4) No Hawk flange listed for this motor.
- IEC 80, 19 mm shaft (RN 80a4, RNM 80a4) No Hawk flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 71, 14 mm motor shaft No Hawk coupling listed: you need one for a 14 mm motor shaft to the pump shaft.
- IEC 80, 19 mm motor shaft No Hawk coupling listed: you need one for a 19 mm motor shaft to the pump shaft.