PumpLookupPump and motor part numbers
Mains Units

FOG NEMA plunger pump

FOG0614NER

Part number 1.904-122.0

  • 2.3Flow, l/min
  • 100Pressure, bar
  • 1740Speed, rpm
  • 0.4Power, kW

60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).

Hawk FOG NEMA pump

Specification

Flow
2.3 l/min
Pressure
100 bar
Speed
1740 rpm
Absorbed power
0.4 kW
Max water temperature
65 °C
Shaft side
Right
Shaft
Solid
Inlet
G 3/8
Outlet
G 3/8
Weight
5.6 kg
Oil
0.25 litres, SAE 10W40

Kits

Extraordinary maintenance5

Part numberDescriptionPer pumpSuppliers
1.099-840.0Plunger3 
1.099-841.0Plunger oil seals1 
1.099-842.0Complete manifold1 
1.904-249.0Valve plug assembly6 
1.904-463.0Flange KIT1 

Ordinary maintenance2

Part numberDescriptionPer pumpSuppliers
1.905-617.0Complete valve kit1 
1.905-618.0Complete seal packing1 

Optional parts1

Part numberDescriptionPer pumpSuppliers
9.853-424.0Threaded brass plug G1/41 

Tools1

Part numberDescriptionPer pumpSuppliers
9.853-525.0Tool-kit1 

Exploded view

Hawk exploded view of the FOG NEMA pump, with position numbers
Hawk's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 9.850-371.0 Crankcase1
2 Kit only Plunger oil seal Ø15 x 24 x 53 1.099-841.0
3 Kit only Pressure ring3 1.099-842.0, 1.905-618.0
4 Kit only Or 2100 1,78 x 25,123 1.099-842.0, 1.905-618.0
5 Kit only Low pressure seal3 1.099-842.0, 1.905-618.0
6 Kit only Intermediate ring3 1.099-842.0, 1.905-618.0
7 Kit only High pressure seal3 1.099-842.0, 1.905-618.0
8 Kit only Support ring3 1.099-842.0, 1.905-618.0
9 Kit only Brass plug G3/81 1.099-842.0
10 Kit only Copper washer G3/81 1.099-842.0
11 Kit only Manifold housing1 1.099-842.0
12 Kit only Or 2062 – Ø1,78 x 15,606 1.099-842.0, 1.905-617.0
13 Kit only Valve assembly6 1.099-842.0, 1.905-617.0
14 Kit only Or 2075 – Ø1,78 x 18.776 1.099-842.0, 1.904-249.0, 1.905-617.0
15 Kit only Manifold plug6 1.099-842.0, 1.904-249.0
16 9.851-486.0 Screw M10 x 452
17 9.851-154.0 Lock-washer2
18 Kit only Valve seat6 1.099-842.0, 1.905-617.0
19 Kit only Valve plate6 1.099-842.0, 1.905-617.0
20 Kit only Valve plate6 1.099-842.0, 1.905-617.0
21 Kit only Valve cage6 1.099-842.0, 1.905-617.0
22 9.851-205.0 Seeger Ø52 UNI 74372
23 9.850-812.0 Sight glass1
24 9.850-704.0 Or 3187 52,54 x 47,31
25 9.851-285.0 Oil dip stick1
26 9.851-199.0 Seeger Ø20 UNI74351
27 9.850-461.0 Ball bearing 6304-20 x 52 x 151
28 9.850-313.0 Connecting rod3
29 9.851-216.0 Connecting rod pin3
30 9.850-103.0 Plunger rod3
31 Kit only Copper spacer3 1.099-840.0
32 Kit only Plunger3 1.099-840.0
33 Kit only Copper spacer3 1.099-840.0
34 Kit only Screw M6 x 603 1.099-840.0
35 9.850-248.0 Crankshaft 5/8”1
36 Kit only Or 3400 101.27XØ2.621 1.904-463.0
37 Kit only Bearing NK40/201 1.904-463.0
38 Kit only Nema flange 56C – 143TC1 1.904-463.0
39 Kit only Oil seal 40 x 52 x 71 1.904-463.0
40 9.851-468.0 Screw M8 x 25 UNI 59314
41 9.851-152.0 Lock-washer4
42 9.851-301.0 Crankcase plug1
43 Kit only Plunger oil seal spacer3 1.099-842.0, 1.905-618.0

Motor

Rated at 1740 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 0.4 kW. Order the one you pick wound for 60 Hz and your supply voltage.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 80a4 0.551420IEC 80IE11.5  
RN 71c4 uprated 0.551370IEC 71IE11.7  
RNM 71c4 0.551390IEC 71Single-phase5.2 at 230 V  
RNM 80a4 0.551420IEC 80Single-phase4.8 at 230 V  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 71, 14 mm shaft (RN 71c4, RNM 71c4) No Hawk flange listed for this motor.
  • IEC 80, 19 mm shaft (RN 80a4, RNM 80a4) No Hawk flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 71, 14 mm motor shaft No Hawk coupling listed: you need one for a 14 mm motor shaft to the pump shaft.
  • IEC 80, 19 mm motor shaft No Hawk coupling listed: you need one for a 19 mm motor shaft to the pump shaft.

Other Hawk FOG NEMA pumps

FOG1214NERFOG1914NERFOG2514NER