PumpLookupPump and motor part numbers
Mains Units

GXX plunger pump

GXX2410L

Part number 1.905-116.0

  • 24Flow, l/min
  • 1000Pressure, bar
  • 1450Speed, rpm
  • 46Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Hawk GXX pump

Specification

Flow
24 l/min
Pressure
1000 bar
Speed
1450 rpm
Absorbed power
46 kW
Max water temperature
65 °C
Shaft side
Left
Shaft
Solid
Inlet
G 1
Outlet
24x1.5 G
Weight
78 kg
Oil
5.5 litres, 15W-40

Kits

Maintenance9

Part numberDescriptionPer pumpSuppliers
1.904-474.0Crankcase seal kit1 
1.904-478.0Plunger oil seal kit1 
1.905-117.0Plunger seal package, 15 mm1 
1.905-118.0Valve seal package1 
1.905-119.0Head screw package1 
1.905-120.0Valve set1 
1.905-121.0Plunger set, 15 mm1 
1.905-122.0Cylinder set, 15 mm1 
1.905-185.0Connecting rod and plunger rod assembly3 

Accessory kits7

Part numberDescriptionPer pumpSuppliers
1.905-236.0Outlet double nipple KIT M24 x 1.5-M24 x 1.51 
1.905-237.01000 bar gxx-txx plug G 1/2 KIT1 
1.905-238.01000 bar gxx-txx outlet plug M24 x 1,5 KIT1 
1.905-239.0Pressure gauge connection KIT1 
1.905-240.0Double nipples KIT suitable for regulating valve vb 40/1000 zero and relief valve vs 11001 
1.905-241.0Double nipple KIT suitable for spray gun rl 10001 
1.905-869.0Rupture disc holder 1100 bar KIT1 

Exploded view

Hawk exploded view of the GXX pump, with position numbers
Hawk's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 9.850-372.0 Crankcase1
2 Kit only Oil seal3 1.904-478.0
3 9.853-530.0 Spacer1
4 Kit only Locking ring 24 x 1,23 1.905-117.0
5 Kit only Washer low pressure seal P153 1.905-117.0
6 Kit only Nd seal P153 1.905-117.0
7 Kit only O-ring seal 16 x 2 mm3 1.905-117.0
8 Kit only Support ring low pressure seal P153 1.905-117.0
9 Kit only Cylinder3 1.905-122.0
10 9.918-593.0 T-screw connection rotatable2
11 9.882-870.0 Hose pneumatic 8 x 1,25450
12 Kit only Guide ring P153 1.905-117.0
13 Kit only Seal3 1.905-117.0
14 Kit only Lamella seal6 1.905-117.0
15 Kit only Guide ring3 1.905-117.0
16 Kit only Spacer ring3 1.905-117.0
17 Kit only Spring 3,2 x 21,8 x 303 1.905-117.0
18 Kit only Guide sleeve suction side3 1.905-120.0
19 Kit only Spring 1,25 x 17,2 x 18,53 1.905-118.0
20 Kit only Suction valve3 1.905-120.0
21 Kit only Joint ring3 1.905-118.0
22 Kit only O-ring seal 50 x 33 1.905-118.0
23 Kit only Central valve3 1.905-120.0
24 Kit only Support ring3 1.905-118.0
25 Kit only O-ring seal 14 x 3 mm3 1.905-118.0
26 Kit only Pressure valve3 1.905-120.0
27 Kit only Spring 1,1 x 12,6 x 283 1.905-118.0
28 Kit only Guide sleeve delivery side3 1.905-120.0
29 9.740-827.0 Pump head1
30 9.881-584.0 Gasket 8 x 11 x 1.5 mm1
31 9.878-108.0 Screw plug g ¼ dz1
32 Kit only Screw M10 x 12018 1.905-119.0
33 9.917-455.0 Stud screw M16 x 2704
34 9.880-036.0 Spring pin 10 x 26 mm4
35 9.853-676.0 Hexagon nut M164
36 9.740-081.0 Clamp cap M164
37 9.882-919.0 Elbow screw connector rotatable D8 G 1/87
38 9.851-468.0 Screw M8 x 2512
39 9.850-646.0 Closed housing1
40 9.850-549.0 Shim1
41 Kit only O-ring 3475 – NBR702 1.904-474.0
42 9.850-353.0 Bearing2
43 9.851-915.0 Crankshaft “b”1
44 9.850-449.0 Crankshaft key1
45 9.851-454.0 Eyebolt M12 x 20 mm1
46 9.851-284.0 Oil dip stick G3/41
47 Kit only Oil seal1 1.904-474.0
48 9.850-645.0 Bearing housing1
49 Kit only Plunger P153 1.905-121.0
50 Kit only Union nut3 1.905-121.0
51 Kit only Tension ring elastic3 1.905-121.0
52 Kit only Sleeve3 1.905-121.0
53 Kit only Spring washer a 156 1.905-121.0
54 Kit only Thrust piece3 1.905-121.0
55 Kit only Plunger rod3 1.905-185.0
56 Kit only Seeger6 1.905-185.0
57 Kit only Connecting rod pin3 1.905-185.0
58 Kit only Connecting rod3 1.905-185.0
59 Kit only Washer M86 1.905-185.0
60 Kit only Screw M8 x 509 1.905-185.0
61 Kit only O-ring Ø2,62 x 255 - NBR901 1.904-474.0
62 9.850-395.0 Crankcase cover1
63 Kit only O-ring 3068 - NBR701 1.904-474.0
64 Kit only Plug G1/21 1.904-474.0
65 Kit only Sight glass G1”1 1.904-474.0
66 9.851-480.0 Screw M6 x 228
66 Kit only O-ring 108 - Ø1,78 x 8,731 1.905-240.0, 1.905-241.0
67 Kit only Double nipple G3/8-M24 x 1,5 dko-s 24°1 1.905-240.0, 1.905-241.0
68 Kit only Double nipple M24 x 1,5-M24 x 1,5 dko-s 24°1 1.905-240.0
69 Kit only O-ring 2062 - Ø1,78 x 15,601 1.905-238.0, 1.905-240.0
70 Kit only Plug M24 x 1,5 1000 bar gxx-txx1 1.905-238.0
71 Kit only O-ring 114 - Ø1,78 x 11,111 1.905-237.0
72 Kit only Plug G 1/2 1000 bar gxx-txx1 1.905-237.0
73 Kit only Rupture disc holder 1100 bar1 1.905-869.0
74 Kit only Ecobrass seal spacer (1000 bar pressure gauge KIT)2 1.905-239.0
75 Kit only Pressure gauge nipple G1/2-G1/2LH 1000 bar gxx-txx1 1.905-239.0
76 Kit only Grub screw M8 x 8 UNI59231 1.905-239.0
77 Kit only 1000 bar gxx-txx pressure gauge sleeve G1/2-G1/2LH1 1.905-239.0
78 1.905-848.0 Pressure gauge 0-1600 bar1

Motor

This pump needs 46 kW at 1450 rpm, more than the largest motor of that speed listed here.

Flange

The flange depends on the motor, so it is chosen with the motor.

Coupling

The coupling depends on the motor shaft, so it is chosen with the motor.

Other Hawk GXX pumps

GXX1710SLGXX1710SRGXX2410R