PumpLookupPump and motor part numbers
Mains Units

HHP 500 bar, 1000 rpm plunger pump

HHP30SR

Part number 1.099-196.0

  • 30Flow, l/min
  • 500Pressure, bar
  • 1000Speed, rpm
  • 28.3Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Hawk HHP 500 bar, 1000 rpm pump

Specification

Flow
30 l/min
Pressure
500 bar
Speed
1000 rpm
Absorbed power
28.3 kW
Max water temperature
65 °C
Shaft side
Right
Shaft
Solid
Inlet
G 1 1/2
Outlet
G 1
Weight
51 kg
Oil
3.5 litres, SAE 10W40

Kits

Extraordinary maintenance6

Part numberDescriptionPer pumpSuppliers
1.099-817.0Plunger oil seal kit1 
1.099-823.0Plunger, 20 mm3 
1.099-829.0Complete manifold1 
1.905-706.0Crankcase seal kit1 
1.905-707.0Connecting rod and plunger rod assembly3 
1.905-714.0Complete seal packing, 20 mm1 

Ordinary maintenance2

Part numberDescriptionPer pumpSuppliers
1.099-821.0Plunger seal kit, 20 mm1 
1.905-713.0Complete valve kit1 

Tools1

Part numberDescriptionPer pumpSuppliers
1.904-204.0Tool-kit1 

Exploded view

Hawk exploded view of the HHP 500 bar, 1000 rpm pump, with position numbers
Hawk's drawing. The numbers match the positions in the parts list below. Open the picture to zoom in.

Parts list

Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.

PosPart numberDescriptionQtyIn kit
1 9.851-902.0 Crankcase1
2 Kit only Plunger oil seal3 1.099-817.0
3 Kit only Plastic bushing3 1.099-817.0
4 Kit only O-ring Ø2.62 x 56,823 1.099-821.0, 1.099-829.0, 1.905-714.0
5 Kit only Pressure ring 20 mm3 1.099-829.0, 1.905-714.0
6 Kit only “u” seal Ø20 x 28 mm3 1.099-821.0, 1.099-829.0, 1.905-714.0
7 Kit only Intermediate ring 20 mm3 1.099-829.0, 1.905-714.0
8 Kit only “u” seal Ø20 x 30 mm3 1.099-821.0, 1.099-829.0, 1.905-714.0
9 Kit only Copper washer1 1.099-829.0
10 Kit only Stainless steel plug G 3/41 1.099-829.0
11 Kit only Manifold housing1 1.099-829.0
12 Kit only O-ring Ø2.62 x 22,2212 1.099-829.0, 1.905-713.0
13 Kit only Valve assembly6 1.099-829.0, 1.905-713.0
14 Kit only Valve plug6 1.099-829.0
15 Kit only Back ring6 1.099-829.0
16 Kit only Valves cover2 1.099-829.0
17 Kit only Valve cover screw12 1.099-829.0
18 Kit only Valve plug screw6 1.099-829.0
19 9.851-471.0 Manifold stud bolt4
20 9.851-472.0 Manifold stud bolt4
21 Kit only Copper washer1 1.099-829.0
22 Kit only Stainless steel plug G1/21 1.099-829.0
23 Kit only Valve seat6 1.099-829.0, 1.905-713.0
24 Kit only Valve plate6 1.099-829.0, 1.905-713.0
25 Kit only Valve spring6 1.099-829.0, 1.905-713.0
26 Kit only Valve cage6 1.099-829.0, 1.905-713.0
27 9.851-468.0 Bearing housing screw12
28 9.850-646.0 Closed bearing screw1
29 Kit only O-ring Ø2.62 x 120.322 1.905-706.0
30 9.850-353.0 Roller bearing2
31 9.850-186.0 Roller bearing1
32 9.850-449.0 Crankshaft KIT1
33 9.851-454.0 Eyebolt1
34 Kit only Crankshaft seal1 1.905-706.0
35 9.850-549.0 Shim1
36 9.850-645.0 Bearing housing1
37 Kit only Plunger bolt3 1.099-823.0, 1.905-707.0
38 Kit only O-ring Ø1.78 x 11.113 1.099-823.0, 1.905-707.0
39 Kit only Plunger Ø203 1.099-823.0
40 Kit only Copper spacer3 1.099-823.0
41 Kit only Plunger rod3 1.905-707.0
42 Kit only Snap ring6 1.905-707.0
43 Kit only Connecting rod pin3 1.905-707.0
44 Kit only Connecting rod3 1.905-707.0
45 Kit only Spring washer6 1.905-707.0
46 Kit only Connecting rod screw6 1.905-707.0
47 Kit only O-ring Ø2.62 x 209.231 1.905-706.0
48 9.850-386.0 Crankcase cover1
49 Kit only O-ring Ø2.62 x 17.131 1.905-706.0
50 Kit only Brass plug G 1/21 1.905-706.0
51 Kit only Sight glass, G 1”1 1.905-706.0
52 Kit only Oil dip stick g ¾1 1.905-706.0
53 9.851-480.0 Cover screw5

Motor

This pump needs 28.3 kW at 1000 rpm, more than the largest motor of that speed listed here.

Flange

The flange depends on the motor, so it is chosen with the motor.

Coupling

The coupling depends on the motor shaft, so it is chosen with the motor.

Other Hawk HHP 500 bar, 1000 rpm pumps

HHP25SLHHP25SRHHP30SL