MXT High Temperature plunger pump
MXT1015HTL
Part number 1.099-342.0
- 100Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 27.7Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 100 l/min (120 l/min at 60 Hz)
- Pressure
- 150 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 27.7 kW (33.2 kW at 60 Hz)
- Shaft side
- Left
- Shaft
- Solid, Ø30 mm h6
- Inlet
- G 1 1/4
- Outlet
- G 3/4
- Weight
- 28.5 kg
- Oil
- 2.3 litres, SAE 10W-40
Kits
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-802.0 | Valve kit | 1 | |
| 1.099-868.0 | Complete seal packing | 1 |
Extraordinary maintenance9
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-803.0 | Plunger | 3 | |
| 1.099-804.0 | Complete valve kit | 1 | |
| 1.099-805.0 | Crankcase seal kit | 1 | |
| 1.099-869.0 | Complete seal packing | 1 | |
| 1.099-870.0 | Cylinder head | 1 | |
| 1.904-428.0 | Connecting rod and plunger rod assembly | 3 | |
| 1.904-451.0 | Manifold screw kit | 1 | |
| 1.904-456.0 | Circulation pipe kit | 1 | |
| 1.905-545.0 | Plunger oil seal kit | 1 |
Tools2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-669.0 | Tool KIT | ||
| 1.904-418.0 | Tool KIT extraordinary |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.850-373.0 | Carter | 1 | |
| 2 | Kit only | Plunger oil seal | 3 | 1.905-545.0 |
| 3 | Kit only | Support ring | 3 | 1.099-869.0 |
| 4 | Kit only | "U" seal | 3 | 1.099-868.0, 1.099-869.0 |
| 5 | Kit only | Intermediate ring | 3 | 1.099-869.0 |
| 6 | Kit only | Back ring | 3 | 1.099-868.0, 1.099-869.0 |
| 7 | Kit only | O-ring | 3 | 1.099-868.0, 1.099-869.0 |
| 8 | Kit only | "U" seal | 3 | 1.099-868.0, 1.099-869.0 |
| 9 | Kit only | Brass plug G3/4" | 1 | 1.099-870.0 |
| 10 | Kit only | Copper spacer G3/4" | 1 | 1.099-870.0 |
| 11 | Kit only | Brass plug G1" 1/4 | 1 | 1.099-870.0 |
| 12 | Kit only | Bonded seal G 1" 1/4 NBR | 1 | 1.099-870.0 |
| 13 | Kit only | Manifold housing | 1 | 1.099-870.0 |
| 14 | Kit only | Spring washer | 4 | 1.904-451.0 |
| 15 | Kit only | Manifold housing screw | 4 | 1.904-451.0 |
| 16 | Kit only | Nut cap | 2 | 1.904-451.0 |
| 17 | Kit only | Nut | 2 | 1.904-451.0 |
| 18 | Kit only | Washer | 2 | 1.904-451.0 |
| 19 | Kit only | Valve assembly | 6 | 1.099-802.0, 1.099-804.0 |
| 20 | Kit only | Valve cage | 3 | 1.099-804.0 |
| 21 | Kit only | Back ring | 6 | 1.099-802.0, 1.099-804.0 |
| 22 | Kit only | O-ring | 9 | 1.099-802.0, 1.099-804.0 |
| 23 | Kit only | Valve seat | 6 | 1.099-802.0, 1.099-804.0 |
| 24 | Kit only | Valve plate | 6 | 1.099-802.0, 1.099-804.0 |
| 25 | Kit only | Valve spring | 6 | 1.099-802.0, 1.099-804.0 |
| 26 | Kit only | Valve cage | 6 | 1.099-802.0, 1.099-804.0 |
| 27 | Kit only | Valve spacer cap | 3 | 1.099-870.0 |
| 28 | Kit only | O-ring | 3 | 1.099-802.0, 1.099-804.0 |
| 29 | Kit only | Back ring | 3 | 1.099-802.0, 1.099-804.0 |
| 30 | Kit only | Manifold housing cover | 1 | 1.099-870.0 |
| 31 | Kit only | Washer | 10 | 1.099-870.0 |
| 32 | Kit only | Cover screw | 10 | 1.099-870.0 |
| 33 | 9.851-503.0 | Bearing housing screw | 12 | |
| 34 | 9.851-114.0 | Washer | 12 | |
| 35 | 9.850-641.0 | Bearing housing | 1 | |
| 36 | 9.850-556.0 | Shim 0,1 mm | 1 | |
| 36 | 9.850-557.0 | Shim 0,05 mm | 1 | |
| 37 | Kit only | O-ring | 2 | 1.099-805.0 |
| 38 | 9.851-963.0 | Roller bearing | 2 | |
| 39 | 9.850-229.0 | Crankshaft spto Ø30 | 1 | |
| 40 | 9.850-450.0 | Crankshaft key | 1 | |
| 41 | 9.851-457.0 | Eyebolt | 1 | |
| 42 | 9.851-287.0 | Oil dip stick | 1 | |
| 43 | 9.850-555.0 | Manifold housing spacer | 2 | |
| 44 | Kit only | Fitting | 6 | 1.904-456.0 |
| 45 | Kit only | Red pipe | 4 | 1.904-456.0 |
| 46 | Kit only | Plunger oil seal | 1 | 1.099-805.0 |
| 47 | 9.850-642.0 | Bearing housing | 1 | |
| 48 | Kit only | Plunger inox screw | 3 | 1.099-803.0 |
| 49 | Kit only | Plunger copper spacer | 3 | 1.099-803.0 |
| 50 | Kit only | Plunger | 3 | 1.099-803.0 |
| 51 | Kit only | Copper spacer | 3 | 1.099-803.0 |
| 52 | Kit only | Plunger rod | 3 | 1.904-428.0 |
| 53 | Kit only | Connecting rod pin | 3 | 1.904-428.0 |
| 54 | Kit only | Connecting rod | 3 | 1.904-428.0 |
| 55 | Kit only | Schnorr washer | 6 | 1.904-428.0 |
| 56 | Kit only | Connecting rod screw | 6 | 1.904-428.0 |
| 57 | Kit only | O-ring | 1 | 1.099-805.0 |
| 58 | 9.850-393.0 | Crankcase cover | 1 | |
| 59 | 9.851-474.0 | Cover screw | 5 | |
| 60 | Kit only | Sight glass G 3/4” | 1 | 1.099-805.0 |
| 61 | Kit only | Brass plug G3/8" | 1 | 1.099-805.0 |
| 62 | Kit only | O-ring | 1 | 1.099-805.0 |
| 63 | 9.851-353.0 | Cup | 1 |
Motor
A 4-pole motor of at least 27.7 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 33.2 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200a4 | 30 | 1475 | IEC 200 | IE1 | 57 | |
| RN 180Lb4 uprated | 30 | 1465 | IEC 180L | IE1 | 58 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 180, 48 mm shaft (RN 180Lb4) No Hawk flange listed for this motor.
- IEC 200, 55 mm shaft (RN 200a4) No Hawk flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 180, 48 mm motor shaft 1.905-879.0 Flexible coupling, IEC 180, 48 mm motor to 30 mm pump
- IEC 200, 55 mm motor shaft 9.853-336.0 Flexible coupling, IEC 200, 55 mm motor to 30 mm pump