NLTI plunger pump
NLT1725IR
Part number 1.099-069.0
- 17Flow, l/min
- 250Pressure, bar
- 1450Speed, rpm
- 8.1Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 17 l/min (20 l/min at 60 Hz)
- Pressure
- 250 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 8.1 kW (9.7 kW at 60 Hz)
- Max water temperature
- 65 °C
- Shaft side
- Right
- Shaft
- Solid
- Inlet
- G 1/2
- Outlet
- G 3/8
- Weight
- 15.2 kg
- Oil
- 1.2 litres, SAE 10W40
Kits
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-760.0 | Plunger seal kit, 18 mm | 1 | |
| 1.905-669.0 | Complete valve kit | 1 |
Extraordinary maintenance7
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-764.0 | Plunger, 18 mm | 3 | |
| 1.099-766.0 | Plunger oil seal kit | 1 | |
| 1.099-768.0 | Complete manifold, 18 mm | 1 | |
| 1.904-182.0 | Connecting rod and plunger rod assembly | 3 | |
| 1.904-251.0 | Valve plug assembly | 6 | |
| 1.905-613.0 | Crankcase seal kit | 1 | |
| 1.905-671.0 | Complete seal packing, 18 mm | 1 |
Tools2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-665.0 | Tool-kit | ||
| 1.905-659.0 | Seal extractor tool-kit |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.850-377.0 | Crankcase | 1 | |
| 2 | Kit only | Plunger oil seal | 3 | 1.099-766.0 |
| 3 | Kit only | O-ring Ø1.78 x 37.82 | 3 | 1.099-760.0, 1.099-768.0, 1.905-671.0 |
| 4 | Kit only | Pressure ring 18 mm | 3 | 1.099-768.0, 1.905-671.0 |
| 5 | Kit only | Low pressure "U" seal Ø18 mm | 3 | 1.099-760.0, 1.099-768.0, 1.905-671.0 |
| 6 | Kit only | Intermediate ring 18 mm | 3 | 1.099-768.0, 1.905-671.0 |
| 7 | Kit only | High pressure "U" seal Ø18 mm | 3 | 1.099-760.0, 1.099-768.0, 1.905-671.0 |
| 8 | Kit only | Copper washer G1/2 | 1 | 1.099-768.0 |
| 9 | Kit only | Plug G1/2 | 1 | 1.099-768.0 |
| 10 | Kit only | Manifold housing Ø18 | 1 | 1.099-768.0 |
| 11 | Kit only | O-ring Ø2.62 x 17.13 | 6 | 1.099-768.0, 1.905-669.0 |
| 12 | Kit only | Valve assembly | 6 | 1.099-768.0, 1.905-669.0 |
| 13 | Kit only | O-ring Ø2.62 x 20.24 | 6 | 1.099-768.0, 1.904-251.0, 1.905-669.0 |
| 14 | Kit only | Valve plug | 6 | 1.099-768.0, 1.904-251.0 |
| 15 | Kit only | Manifold screw M10 x 80 geomet | 8 | 1.099-768.0 |
| 16 | Kit only | Washer Ø10,2 | 8 | 1.099-768.0 |
| 17 | Kit only | Copper washer G3/8 | 1 | 1.099-768.0 |
| 18 | Kit only | Plug G3/8 | 2 | 1.099-768.0, 1.905-613.0 |
| 19 | Kit only | Valve seat | 6 | 1.099-768.0, 1.905-669.0 |
| 20 | Kit only | Valve plate | 6 | 1.099-768.0, 1.905-669.0 |
| 21 | Kit only | Valve spring | 6 | 1.099-768.0, 1.905-669.0 |
| 22 | Kit only | Valve cage | 6 | 1.099-768.0, 1.905-669.0 |
| 23 | 9.851-503.0 | Hexagonal screw M8 x 20 | 8 | |
| 24 | 9.851-114.0 | Washer | 6 | |
| 25 | 9.850-620.0 | Closed bearing housing | ||
| 26 | Kit only | O-ring Ø1.78 x 71.12 | 2 | 1.905-613.0 |
| 27 | 9.850-347.0 | Roller bearing | 2 | |
| 28 | 9.850-209.0 | Single - ended shaft | 1 | |
| 30 | 9.850-446.0 | Crankshaft key | ||
| 31 | 9.851-287.0 | Oil dip stick | 1 | |
| 32 | Kit only | Crankshaft seal | 1.905-613.0 | |
| 33 | 9.850-546.0 | Shim | 1 | |
| 34 | 9.850-610.0 | Bearing housing i Ø61 | ||
| 34 | 9.850-619.0 | Bearing housing Ø60 | ||
| 35 | Kit only | Plunger screw | 3 | 1.099-764.0, 1.904-182.0 |
| 36 | Kit only | Bonded seal | 3 | 1.099-764.0, 1.904-182.0 |
| 37 | Kit only | Plunger 18 mm | 3 | 1.099-764.0 |
| 38 | Kit only | Copper spacer | 3 | 1.099-764.0 |
| 39 | Kit only | Plunger rod | 3 | 1.904-182.0 |
| 40 | Kit only | Connecting rod | 3 | 1.904-182.0 |
| 41 | Kit only | Connecting rod pin | 3 | 1.904-182.0 |
| 42 | Kit only | Spring washer Ø6 | 6 | 1.904-182.0 |
| 43 | Kit only | Connecting rod screw M8 x 35 | 6 | 1.904-182.0 |
| 44 | Kit only | O-ring Ø2.62 x 152.07 | 1 | 1.905-613.0 |
| 45 | 9.850-389.0 | Crankcase cover | 1 | |
| 46 | Kit only | O-ring Ø1.78 x 14 | 1 | 1.905-613.0 |
| 47 | Kit only | Sight glass, G3/4 | 1 | 1.905-613.0 |
| 48 | 9.851-474.0 | Screw M6 x 16 | 5 |
Motor
A 4-pole motor of at least 8.1 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 9.7 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160Ma4 | 11 | 1475 | IEC 160M | IE3 | 22.4 | |
| RN 160Ma4 | 11 | 1450 | IEC 160M | IE1 | 22.4 | |
| RN 132Mb4 uprated | 9.2 | 1440 | IEC 132M | IE1 | 19.2 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 132, 38 mm shaft (RN 132Mb4) 1.099-531.0 Motor flange, IEC 132 B14
- IEC 160, 42 mm shaft (RNE 160Ma4, RN 160Ma4) No Hawk flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 132, 38 mm motor shaft 1.099-545.0 Flexible coupling, IEC 132, 38 mm motor to 24 mm pump
- IEC 160, 42 mm motor shaft No Hawk coupling listed: you need one for a 42 mm motor shaft to the pump shaft.
Gearbox for engine drive
Other Hawk NLTI pumps
NLT1725ILNLT2125ILNLT2125IRNLT2525BNLT2525IBNLT2525ILNLT2525IRNLT2525ISBNLT2525ISLNLT2525ISRNLT2525SBNLT2525SLNLT2525SRNLT3020IBNLT3020ILNLT3020IR