XLTI Chemical plunger pump
XLT4015EBCHL
Part number 1.904-826.0
- 40Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 11.5Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 40 l/min (48 l/min at 60 Hz)
- Pressure
- 150 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 11.5 kW (13.8 kW at 60 Hz)
- Max water temperature
- 65 °C
- Shaft side
- Left
- Shaft
- Solid, Ø24 mm
- Inlet
- G 1"
- Outlet
- G 1/2
- Weight
- 20.5 kg
- Oil
- 1.2 litres, SAE 10W-40
Kits
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.904-464.0 | Plunger seal kit, 25 mm | 1 | |
| 1.904-803.0 | Complete valve kit | 1 |
Extraordinary maintenance7
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.904-466.0 | Plunger, 25 mm | 3 | |
| 1.904-804.0 | Complete manifold | 1 | |
| 1.905-545.0 | Plunger oil seal kit | 1 | |
| 1.905-613.0 | Crankcase seal kit | 1 | |
| 1.905-694.0 | Complete seal packing, 25 mm | 1 | |
| 1.905-715.0 | Connecting rod and plunger rod assembly | 3 | |
| 9.853-512.0 | Valve plug assembly | 6 |
Tools2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-665.0 | Tool-kit | 1 | |
| 1.905-659.0 | Seal extractor tool-kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.853-797.0 | Red crankcase | 1 | |
| 2 | Kit only | Plunger oil seal FKM | 3 | 1.905-545.0 |
| 3 | Kit only | O-ring Ø1.78 x 37.82 FKM | 3 | 1.904-464.0, 1.904-804.0, 1.905-694.0 |
| 4 | Kit only | Stainless steel pressure ring 25 mm | 3 | 1.904-804.0, 1.905-694.0 |
| 5 | Kit only | Low pressure "U" seal Ø25 mm | 3 | 1.904-464.0, 1.904-804.0, 1.905-694.0 |
| 6 | Kit only | Stainless steel intermediate ring 25 mm | 3 | 1.904-804.0, 1.905-694.0 |
| 7 | Kit only | High pressure "U" seal Ø25 mm | 3 | 1.904-464.0, 1.904-804.0, 1.905-694.0 |
| 8 | Kit only | Stainless steel bonded seal G 1” | 2 | 1.904-804.0 |
| 9 | Kit only | Ecobrass plug G 1” | 2 | 1.904-804.0 |
| 10 | Kit only | Ecobrass manifold housing | 1 | 1.904-804.0 |
| 11 | Kit only | O-ring Ø2.62 x 25.07 FKM | 6 | 1.904-803.0, 1.904-804.0 |
| 12 | Kit only | Valve assembly | 6 | 1.904-803.0, 1.904-804.0 |
| 13 | Kit only | O-ring Ø3.53 x 26.58 FKM | 6 | 1.904-803.0, 1.904-804.0, 9.853-512.0 |
| 14 | Kit only | Ecobrass valve plug | 6 | 1.904-803.0, 1.904-804.0, 9.853-512.0 |
| 15 | Kit only | Stainless steel bolt M10 x 80 | 8 | 1.904-804.0 |
| 16 | Kit only | Stainless steel lock washer Ø10,2 | 8 | 1.904-804.0 |
| 17 | Kit only | Stainless steel bonded seal G 1/2 | 1 | 1.904-804.0 |
| 18 | Kit only | Ecobrass plug G 1/2 | 1 | 1.904-804.0 |
| 19 | Kit only | Valve seat | 6 | 1.904-803.0, 1.904-804.0 |
| 20 | Kit only | Valve plate | 6 | 1.904-803.0, 1.904-804.0 |
| 21 | Kit only | Valve spring | 6 | 1.904-803.0, 1.904-804.0 |
| 22 | Kit only | Valve cage | 6 | 1.904-803.0, 1.904-804.0 |
| 23 | 9.851-476.0 | Screw M8 x 20 stainless steel | 8 | |
| 24 | 9.851-133.0 | Lock washer stainless steel | 8 | |
| 25 | 9.853-799.0 | Red closed bearing housing | 1 | |
| 26 | Kit only | O-ring Ø2.62 x 71.12 NBR | 2 | 1.905-613.0 |
| 27 | 9.850-347.0 | Roller bearing 33206 | 2 | |
| 28 | 9.850-193.0 | Single - ended shaft | 1 | |
| 29 | 9.850-447.0 | Crankshaft key | 1 | |
| 30 | 9.851-287.0 | Oil dip stick | 1 | |
| 31 | Kit only | Crankshaft seal NBR | 1 | 1.905-613.0 |
| 32 | 9.850-546.0 | Shim | 1 | |
| 33 | 9.853-798.0 | Red open bearing housing | 1 | |
| 34 | Kit only | Plunger bolt | 3 | 1.904-466.0, 1.905-715.0 |
| 35 | Kit only | Stainless steel bonded seal | 3 | 1.904-466.0, 1.905-715.0 |
| 36 | Kit only | Plunger 25 mm | 3 | 1.904-466.0 |
| 37 | Kit only | Stainless steel spacer | 3 | 1.904-466.0 |
| 38 | Kit only | Plunger rod | 3 | 1.905-715.0 |
| 39 | Kit only | Connecting rod | 3 | 1.905-715.0 |
| 40 | Kit only | Connecting rod pin | 3 | 1.905-715.0 |
| 41 | Kit only | Spring washer Ø8 | 6 | 1.905-715.0 |
| 42 | Kit only | Connecting rod screw M8 x 35 | 6 | 1.905-715.0 |
| 43 | Kit only | O-ring Ø2.62 x 152.07 NBR | 1 | 1.905-613.0 |
| 44 | 9.853-799.0 | Red crankcase cover | 1 | |
| 45 | Kit only | O-ring Ø1.78 x 14 NBR | 1 | 1.905-613.0 |
| 46 | Kit only | Brass plug G3/8 | 1 | 1.905-613.0 |
| 47 | Kit only | Sight glass, G3/4 | 1 | 1.905-613.0 |
| 48 | 9.851-474.0 | Cover screw stainless steel | 5 |
Motor
A 4-pole motor of at least 11.5 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 13.8 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160La4 | 15 | 1465 | IEC 160L | IE3 | 30.5 | |
| RN 160La4 | 15 | 1450 | IEC 160L | IE1 | 30 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) 1.099-532.0 Motor flange, IEC 160 B5
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft 1.905-890.0 Flexible coupling, IEC 160, 42 mm motor to 24 mm pump
Other Hawk XLTI Chemical pumps
XLT2515EBCHLXLT2515EBCHRXLT3015EBCHLXLT3015EBCHRXLT3515EBCHLXLT3515EBCHRXLT4015EBCHRXLT5015EBCHLXLT5015EBCHR