XLTI ATEX plunger pump
XLT4017IEX
- 40Flow, l/min
- 170Pressure, bar
- 1450Speed, rpm
- 12.5Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 40 l/min (48 l/min at 60 Hz)
- Pressure
- 170 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 12.5 kW (15 kW at 60 Hz)
- Shaft
- Solid, Ø24 mm g6
- Inlet
- G 3/4
- Outlet
- G 1/2
- Weight
- 17.2 kg
- Oil
- 1.2 litres, SAE 10W40
Kits
Extraordinary maintenance7
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-766.0 | Plunger oil seal kit | 1 | |
| 1.099-777.0 | Plunger, 25 mm | 3 | |
| 1.099-783.0 | Complete manifold, 25 mm | 1 | |
| 1.904-180.0 | Connecting rod and plunger rod assembly | 3 | |
| 1.904-260.0 | Valve plug assembly | 6 | |
| 1.905-613.0 | Crankcase seal kit | 1 | |
| 1.905-853.0 | Complete seal packing, 25 mm | 1 |
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-770.0 | Plunger seal kit, 25 mm | 1 | |
| 1.905-686.0 | Complete valve kit | 1 |
Optional parts1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 9.853-428.0 | Threaded brass plug G1/4 | 1 |
Tools2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-665.0 | Tool-kit | 1 | |
| 1.905-659.0 | Seal extractor tool-kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.850-377.0 | Crankcase | 1 | |
| 2 | Kit only | Plunger oil seal | 3 | 1.099-766.0 |
| 3 | Kit only | O-ring Ø1.78 x 37.82 | 3 | 1.099-770.0, 1.099-783.0, 1.905-853.0 |
| 4 | Kit only | Pressure ring 25 mm | 3 | 1.099-783.0, 1.905-853.0 |
| 5 | Kit only | Low pressure "U" seal Ø25 mm | 3 | 1.099-770.0, 1.099-783.0, 1.905-853.0 |
| 6 | Kit only | Intermediate ring 25 mm | 3 | 1.099-783.0, 1.905-853.0 |
| 7 | Kit only | High pressure "U" seal Ø25 mm | 3 | 1.099-770.0, 1.099-783.0, 1.905-853.0 |
| 8 | Kit only | Brass plug G 3/4 | 1 | 1.099-783.0 |
| 9 | Kit only | Copper washer G 3/4 | 1 | 1.099-783.0 |
| 10 | Kit only | Manifold housing 28/25 | 1 | 1.099-783.0 |
| 11 | Kit only | O-ring Ø2.62 x 25.07 | 6 | 1.099-783.0, 1.905-686.0 |
| 12 | Kit only | Valve assembly | 6 | 1.099-783.0, 1.905-686.0 |
| 13 | Kit only | O-ring Ø2.62 x 26.58 | 6 | 1.099-783.0, 1.904-260.0, 1.905-686.0 |
| 14 | Kit only | Valve plug | 6 | 1.099-783.0, 1.904-260.0 |
| 15 | Kit only | Manifold stud bolt | 8 | 1.099-783.0 |
| 16 | Kit only | Lock-washer | 8 | 1.099-783.0 |
| 17 | Kit only | Copper washer G1/2 | 1 | 1.099-783.0 |
| 18 | Kit only | Brass plug G1/2 | 1 | 1.099-783.0 |
| 19 | Kit only | Valve seat | 6 | 1.099-783.0, 1.905-686.0 |
| 20 | Kit only | Valve plate | 6 | 1.099-783.0, 1.905-686.0 |
| 21 | Kit only | Valve spring | 6 | 1.099-783.0, 1.905-686.0 |
| 22 | Kit only | Valve cage | 6 | 1.099-783.0, 1.905-686.0 |
| 23 | 9.851-503.0 | Hexagonal screw | 8 | |
| 24 | 9.851-114.0 | Washer Ø8.5 | 8 | |
| 25 | 9.850-620.0 | Closed bearing housing | 1 | |
| 26 | Kit only | O-ring Ø2.62 x 71.12 | 2 | 1.905-613.0 |
| 27 | 9.850-347.0 | Roller bearing | 2 | |
| 28 | 9.850-193.0 | Crankshaft Ø24 mm | 1 | |
| 29 | 9.850-447.0 | Crankshaft KIT | 1 | |
| 30 | 9.851-287.0 | Oil dip stick | 1 | |
| 31 | 9.850-000.0 | Crankshaft seal | 1 | |
| 32 | 9.850-546.0 | Shim | 1 | |
| 33 | 9.850-604.0 | Bearing housing (right version) | 1 | |
| 33 | 9.850-605.0 | Bearing housing (left version) | 1 | |
| 34 | Kit only | Plunger bolt | 3 | 1.099-777.0 |
| 35 | Kit only | Bonded seal | 3 | 1.099-777.0 |
| 36 | Kit only | Plunger Ø25 mm | 3 | 1.099-777.0 |
| 37 | Kit only | Copper spacer | 3 | 1.099-777.0 |
| 38 | Kit only | Plunger rod | 3 | 1.904-180.0 |
| 39 | Kit only | Connecting rod pin | 3 | 1.904-180.0 |
| 40 | Kit only | Connecting rod | 3 | 1.904-180.0 |
| 41 | Kit only | Spring washer | 6 | 1.904-180.0 |
| 42 | Kit only | Connecting rod screw | 6 | 1.904-180.0 |
| 43 | Kit only | O-ring Ø2.62 x 152.07 | 1 | 1.905-613.0 |
| 44 | 9.850-389.0 | Crankcase cover | 1 | |
| 45 | Kit only | O-ring Ø1.78 x 14.00 | 1 | 1.905-613.0 |
| 46 | Kit only | Brass plug G 3/8 | 1 | 1.905-613.0 |
| 47 | Kit only | Sight glass, G 3/4 | 1 | 1.905-613.0 |
| 48 | 9.851-474.0 | Cover screw | 5 |
Motor
A 4-pole motor of at least 12.5 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 15 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160La4 | 15 | 1465 | IEC 160L | IE3 | 30.5 | |
| RN 160La4 | 15 | 1450 | IEC 160L | IE1 | 30 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) 1.099-532.0 Motor flange, IEC 160 B5
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft 1.905-890.0 Flexible coupling, IEC 160, 42 mm motor to 24 mm pump
Other Hawk XLTI ATEX pumps
XLT1530IEXLXLT1530IEXRXLT1830IEXLXLT1830IEXRXLT2230IEXLXLT2230IEXRXLT2530IEXXLT2730IEXXLT3020IEXSXLT3025IEXLXLT3025IEXRXLT3325IEXXLT3517IEXXLT3816IEXSXLT4317IEXXLT5015IEXXLT5415IEX