XLTI High Temperature plunger pump
XLT4217HTIL
Part number 1.099-332.0
- 42Flow, l/min
- 170Pressure, bar
- 1450Speed, rpm
- 13.6Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 42 l/min (50 l/min at 60 Hz)
- Pressure
- 170 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 13.6 kW (16.3 kW at 60 Hz)
- Max water temperature
- 85 °C
- Shaft side
- Left
- Shaft
- Solid, Ø24 mm g6
- Inlet
- G 3/4
- Outlet
- G 1/2
- Weight
- 17.9 kg
- Oil
- 1.2 litres, SAE 10W40
Kits
Extraordinary maintenance7
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-776.0 | Plunger, 22 mm | 3 | |
| 1.099-860.0 | Complete manifold, 22 mm | 1 | |
| 1.904-182.0 | Connecting rod and plunger rod assembly | 1 | |
| 1.904-325.0 | Valve plug assembly | 1 | |
| 1.904-919.0 | Complete seal packing, 22 mm | 1 | |
| 1.905-545.0 | Plunger oil seal kit | 1 | |
| 1.905-613.0 | Crankcase seal kit | 1 |
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.904-918.0 | Plunger seal kit, 22 mm | 1 | |
| 1.905-687.0 | Complete valve kit | 1 |
Optional parts1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 9.853-427.0 | Threaded brass plug G1/4 | 1 |
Tools2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-665.0 | Tool-kit | 1 | |
| 1.905-659.0 | Seal extractor tool-kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.850-377.0 | Crankcase | 1 | |
| 2 | 9.851-277.0 | Polyester fiber sponge | 1 | |
| 3 | 9.851-443.0 | Drainage tank | 1 | |
| 4 | Kit only | Plunger oil seal | 3 | 1.905-545.0 |
| 5 | Kit only | O-ring Ø1.78 x 37.82 | 3 | 1.099-860.0, 1.904-918.0, 1.904-919.0 |
| 6 | Kit only | Pressure ring 22 mm | 3 | 1.099-860.0, 1.904-919.0 |
| 7 | Kit only | Low pressure "U" seal Ø22 mm | 3 | 1.099-860.0, 1.904-918.0, 1.904-919.0 |
| 8 | Kit only | Intermediate ring 22 mm | 3 | 1.099-860.0, 1.904-919.0 |
| 9 | Kit only | High pressure "U" seal Ø22 mm | 3 | 1.099-860.0, 1.904-918.0, 1.904-919.0 |
| 10 | Kit only | Copper washer G 3/4 | 1 | 1.099-860.0 |
| 11 | Kit only | Brass plug G 3/4 | 1 | 1.099-860.0 |
| 12 | Kit only | Manifold housing 22/20 | 1 | 1.099-860.0 |
| 13 | Kit only | O-ring Ø2.62 x 21.89 | 6 | 1.099-860.0, 1.905-687.0 |
| 14 | Kit only | Valve assembly | 6 | 1.099-860.0, 1.905-687.0 |
| 15 | Kit only | O-ring Ø2.62 x 25.80 | 6 | 1.099-860.0, 1.905-687.0 |
| 16 | Kit only | Valve plug | 6 | 1.099-860.0 |
| 17 | Kit only | Manifold stud bolt | 8 | 1.099-860.0 |
| 18 | Kit only | Lock-washer | 8 | 1.099-860.0 |
| 19 | Kit only | Copper washer G1/2 | 1 | 1.099-860.0 |
| 20 | Kit only | Brass plug G1/2 | 1 | 1.099-860.0 |
| 21 | Kit only | Valve seat | 6 | 1.099-860.0, 1.905-687.0 |
| 22 | Kit only | Valve plate | 6 | 1.099-860.0, 1.905-687.0 |
| 23 | Kit only | Valve spring | 6 | 1.099-860.0, 1.905-687.0 |
| 24 | Kit only | Valve cage | 6 | 1.099-860.0, 1.905-687.0 |
| 25 | 9.851-503.0 | Hexagonal screw | 8 | |
| 26 | 9.851-114.0 | Washer Ø8.5 | 8 | |
| 27 | 9.850-620.0 | Closed bearing housing | 1 | |
| 28 | Kit only | O-ring Ø2.62 x 71.12 | 2 | 1.905-613.0 |
| 29 | 9.850-347.0 | Roller bearing | 2 | |
| 30 | 9.850-195.0 | Crankshaft Ø24 mm | 1 | |
| 31 | 9.850-447.0 | Crankshaft KIT | 1 | |
| 32 | 9.851-287.0 | Oil dip stick | 1 | |
| 33 | Kit only | Crankshaft seal | 1 | 1.905-613.0 |
| 34 | 9.850-546.0 | Shim | 1 | |
| 35 | 9.850-610.0 | Bearing housing | 1 | |
| 36 | Kit only | Plunger bolt | 3 | 1.099-776.0 |
| 37 | Kit only | Bonded seal | 3 | 1.099-776.0 |
| 38 | Kit only | Plunger Ø22 mm | 3 | 1.099-776.0 |
| 39 | Kit only | Copper spacer | 3 | 1.099-776.0 |
| 40 | Kit only | Plunger rod | 3 | 1.904-182.0 |
| 41 | Kit only | Connecting rod pin | 3 | 1.904-182.0 |
| 42 | Kit only | Connecting rod | 3 | 1.904-182.0 |
| 43 | Kit only | Spring washer | 6 | 1.904-182.0 |
| 44 | Kit only | Connecting rod screw | 6 | 1.904-182.0 |
| 45 | Kit only | O-ring Ø2.62 x 152.07 | 1 | 1.905-613.0 |
| 46 | 9.850-389.0 | Crankcase cover | 1 | |
| 47 | Kit only | O-ring Ø1.78 x 14.00 | 1 | 1.905-613.0 |
| 48 | Kit only | Brass plug G 3/8 | 1 | 1.905-613.0 |
| 49 | Kit only | Sight glass, G 3/4 | 1 | 1.905-613.0 |
| 50 | 9.851-474.0 | Cover screw | 5 |
Motor
A 4-pole motor of at least 13.6 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 16.3 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 160La4 | 15 | 1465 | IEC 160L | IE3 | 30.5 | |
| RN 160La4 | 15 | 1450 | IEC 160L | IE1 | 30 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RNE 160La4, RN 160La4) 1.099-532.0 Motor flange, IEC 160 B5
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft 1.905-890.0 Flexible coupling, IEC 160, 42 mm motor to 24 mm pump
Other Hawk XLTI High Temperature pumps
XLT1520HTILXLT1520HTIRXLT1820HTILXLT1820HTIRXLT2220HTILXLT2220HTIRXLT2520HTILXLT2520HTIRXLT2720HTILXLT2720HTIRXLT3020HTILXLT3020HTIRXLT3320HTILXLT3320HTIRXLT4217HTIR