XXT plunger pump
XXT6215IL
Part number 1.904-958.0
- 62Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 17.6Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 62 l/min (74 l/min at 60 Hz)
- Pressure
- 150 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 17.6 kW (21 kW at 60 Hz)
- Max water temperature
- 65 °C
- Shaft side
- Left
- Shaft
- Solid
- Inlet
- G 1
- Outlet
- G 3/4
- Weight
- 18.6 kg
- Oil
- 1.2 litres, SAE 10W40
Kits
Extraordinary maintenance7
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-766.0 | Plunger oil seal kit | 1 | |
| 1.099-778.0 | Plunger, 28 mm | 3 | |
| 1.099-791.0 | Complete manifold, 28 mm | 1 | |
| 1.904-182.0 | Connecting rod and plunger rod assembly | 3 | |
| 1.904-326.0 | Valve plug assembly | 6 | |
| 1.905-613.0 | Crankcase seal kit | 1 | |
| 1.905-854.0 | Complete seal packing, 28 mm | 1 |
Ordinary maintenance2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-771.0 | Plunger seal kit, 28 mm | 1 | |
| 1.905-594.0 | Complete valve kit | 1 |
Optional parts1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 9.853-430.0 | Threaded brass plug G1/4 | 1 |
Tools2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| 1.099-665.0 | Tool-kit | 1 | |
| 1.905-659.0 | Seal extractor tool-kit | 1 |
Exploded view
Parts list
Positions are the balloon numbers on Hawk's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 9.850-377.0 | Crankcase | 1 | |
| 2 | Kit only | Plunger oil seal | 3 | 1.099-766.0 |
| 3 | Kit only | O-ring Ø1.78 x 37.82 | 3 | 1.099-771.0, 1.099-791.0, 1.905-854.0 |
| 4 | Kit only | Pressure ring 28 mm | 3 | 1.099-791.0, 1.905-854.0 |
| 5 | Kit only | Low pressure "U" seal Ø28 mm | 3 | 1.099-771.0, 1.099-791.0, 1.905-854.0 |
| 6 | Kit only | Intermediate ring 28 mm | 3 | 1.099-791.0, 1.905-854.0 |
| 7 | Kit only | High pressure "U" seal Ø28 mm | 3 | 1.099-771.0, 1.099-791.0, 1.905-854.0 |
| 8 | Kit only | Copper washer G1” | 1 | 1.099-791.0 |
| 9 | Kit only | Plug G1” | 1 | 1.099-791.0 |
| 10 | Kit only | Manifold housing 28/25 | 1 | 1.099-791.0 |
| 11 | Kit only | O-ring Ø2.62 x 25.07 | 6 | 1.099-791.0, 1.905-594.0 |
| 12 | Kit only | Inlet valve | 6 | 1.099-791.0, 1.905-594.0 |
| 13 | Kit only | O-ring Ø2.62 x 26.58 | 6 | 1.099-791.0, 1.904-326.0, 1.905-594.0 |
| 14 | Kit only | Valve plug | 6 | 1.099-791.0, 1.904-326.0 |
| 15 | Kit only | Manifold screw M10 x 80 geomet | 8 | 1.099-791.0 |
| 16 | Kit only | Washer Ø10.2 | 16 | 1.099-791.0 |
| 17 | Kit only | Copper washer G3/4 | 1 | 1.099-791.0 |
| 18 | Kit only | Plug G3/4 | 2 | 1.099-791.0, 1.905-613.0 |
| 19 | Kit only | Outlet valve | 6 | 1.099-791.0, 1.905-594.0 |
| 20 | 9.851-503.0 | Hexagonal screw M8 x 20 | 8 | |
| 21 | 9.851-114.0 | Washer Ø8,5 | 8 | |
| 22 | 9.850-624.0 | Closed bearing housing | 1 | |
| 23 | Kit only | O-ring Ø1.78 x 71.12 | 2 | 1.905-613.0 |
| 24 | 9.850-348.0 | Roller bearing | 2 | |
| 25 | 9.853-816.0 | Crankshaft Ø24 | 1 | |
| 26 | 9.850-447.0 | Crankshaft key | 1 | |
| 27 | 9.851-287.0 | Oil dip stick | 1 | |
| 28 | Kit only | Crankshaft seal | 1 | 1.905-613.0 |
| 29 | 9.850-546.0 | Shim | 1 | |
| 30 | 9.850-597.0 | Bearing housing | 1 | |
| 31 | Kit only | Plunger scew | 3 | 1.099-778.0, 1.904-182.0 |
| 32 | Kit only | Bonded seal | 3 | 1.099-778.0, 1.904-182.0 |
| 33 | Kit only | Plunger 28 mm | 3 | 1.099-778.0 |
| 34 | Kit only | Copper spacer | 3 | 1.099-778.0 |
| 35 | Kit only | Plunger rod | 3 | 1.904-182.0 |
| 36 | Kit only | Connecting rod pin | 3 | 1.904-182.0 |
| 37 | Kit only | Connecting rod | 3 | 1.904-182.0 |
| 38 | Kit only | Spring washer Ø6 | 6 | 1.904-182.0 |
| 39 | Kit only | Connecting rod screw M6 x 30 | 6 | 1.904-182.0 |
| 40 | Kit only | O-ring Ø2.62 x 152.07 | 1 | 1.905-613.0 |
| 41 | 9.850-389.0 | Crankcase cover | 1 | |
| 42 | Kit only | O-ring Ø1.78 x 14 | 1 | 1.905-613.0 |
| 43 | Kit only | Brass plug G3/8 | 1 | |
| 44 | Kit only | Sight glass, G3/4 | 1 | 1.905-613.0 |
| 45 | 9.851-474.0 | Screw M6 x 16 | 4 | |
| 46 | Kit only | Valve seat | 6 | 1.099-791.0, 1.905-594.0 |
| 47 | Kit only | Valve plate | 6 | 1.099-791.0, 1.905-594.0 |
| 48 | Kit only | Valve spring | 3 | 1.099-791.0, 1.905-594.0 |
| 49 | Kit only | Valve cage | 6 | 1.099-791.0, 1.905-594.0 |
| 50 | Kit only | Valve spring | 3 | 1.099-791.0, 1.905-594.0 |
Motor
A 4-pole motor of at least 17.6 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm, where it takes 21 kW. Order that motor wound for 60 Hz and rated for at least that power.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 180Ma4 | 18.5 | 1465 | IEC 180M | IE1 | 37 | |
| RN 160Lb4 uprated | 18.5 | 1420 | IEC 160L | IE1 | 38 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RN 160Lb4) 1.099-532.0 Motor flange, IEC 160 B5
- IEC 180, 48 mm shaft (RN 180Ma4) No Hawk flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft 1.905-890.0 Flexible coupling, IEC 160, 42 mm motor to 24 mm pump
- IEC 180, 48 mm motor shaft No Hawk coupling listed: you need one for a 48 mm motor shaft to the pump shaft.
Gearbox for engine drive
Other Hawk XXT pumps
XXT4121ILXXT4121IRXXT5520ILXXT5520IRXXT6215IRXXT7015ILXXT7015IR