53 E1 series plunger pump
E1E1812
- 12Flow, l/min
- 180Pressure, bar
- 3400Speed, rpm
- 4.12Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 12 l/min
- Pressure
- 180 bar
- Speed
- 3400 rpm
- Absorbed power
- 4.12 kW
- Plunger
- 15 mm
- Weight
- 5 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 309 | Valve kit |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 311 | Oil seal kit | 3 |
Water seals2
Parts list
Positions are the balloon numbers on Interpump's exploded view. A part with no number of its own comes in the kit shown beside it.
| Pos | Part number | Description | Qty | In kit |
|---|---|---|---|---|
| 1 | 53120015 | Manifold d. 15 | 1 | |
| 2 | 36211951 | Intake valve guide | 3 | KIT 309 |
| 3 | 94732600 | Spring dm. 6.0 x 12.0 | 3 | KIT 309 |
| 4 | 36211276 | Spherical valve | 6 | KIT 309 |
| 5 | 36211366 | Valve seat | 6 | KIT 309 |
| 6 | 90367400 | O-ring Ø12 x 2 (120-20) | 6 | KIT 309 |
| 7 | 36722401 | Intake valve assembly | 3 | KIT 309 |
| 8 | 90359300 | O-ring 15,60 x 1,78 (2062) | 6 | |
| 9 | 98213750 | Plug M18 x 1,5 x 10 Ø23 (nick.) | 6 | |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 | |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 | |
| 12 | 53040009 | Plunger d. 15 x 38.5 | 3 | |
| 13 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 | KIT 309 |
| 14 | 36211151 | Valve cage | 3 | KIT 309 |
| 15 | 36719301 | Outlet valve | 3 | KIT 309 |
| 16 | 99199000 | Screw M6 x 60 UNI 5931 | 8 | |
| 17 | 63101051 | Head ring Ø15 hp | 3 | KIT 312, KIT 313 |
| 18 | 90261100 | Packing Ø15 x 24 x 5/2.7 hp | 3 | |
| 18 | 90265350 | Packing Ø18 x 28 x 6/3.7 hp | 3 | KIT 312, KIT 313 |
| 19 | 90508990 | Anti-extr. ring Ø15 x 24 x 2 | 3 | KIT 312, KIT 313 |
| 20 | 53210170 | Seal support d. 15 | 3 | KIT 313 |
| 21 | 90360400 | O-ring 25,12 x 1,78 (2100) | 3 | KIT 312, KIT 313 |
| 22 | 90260800 | Packing Ø15 x 22 x 5 lp 63 | 3 | KIT 312, KIT 313 |
| 23 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 | |
| 24 | 98210050 | Plug G3/8 x 13 TE22 | 1 | |
| 25 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 | |
| 26 | 98218700 | Plug G 1/2”x10 TE27 – zinc. | 1 | |
| 27 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 | |
| 28 | 53210382 | Sponge gasket d. 3 x 85 | 1 | |
| 29 | 53010022 | Pump crankcase | 1 | |
| 30 | 58210451 | Protection | 1 | |
| 31 | 90159300 | Oil seal d. 18.0 x 24.0 x 4.0 | 3 | KIT 311 |
| 32 | 53050066 | Piston guide | 3 | |
| 33 | 97733800 | Connecting-rod pin d. 10 x 26.5 | 3 | |
| 34 | 53030022 | Connecting rod | 3 | |
| 35 | 53150022 | Side crankcase cover | 1 | |
| 36 | 99183700 | Screw m 6 x 14 UNI 5931 | 8 | |
| 37 | 53210851 | Oil level gauge | 1 | |
| 38 | 90063500 | Circlip Ø25 UNI 7435 | 2 | |
| 40 | 91832800 | Ball bearing, d. 15-18 | 2 | |
| 41 | 90389800 | O-ring 56,82 x 2,62 (3225) | 1 | |
| 42 | 90164100 | Oil seal Ø25 x 62 x 10 | 1 | |
| 43 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 | |
| 44 | 98210800 | Oil dipstick plug G 3/8”x45 | 1 | |
| 45 | 90391700 | O-ring d. 88.57 x 2.62 NBR SH.70 3350 | 1 | |
| 46 | 53160022 | Rear crankcase cover | 1 | |
| 47 | 98204250 | Plug G1/4"x12 | 1 | |
| 48 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 | |
| 49 | 98196800 | Plug G 1/8”x8 | 1 | |
| 50 | 53210670 | Seal ring d. 15 | 3 | KIT 313 |
| 51 | 99303700 | Screw m 8 x 16-5739 | 4 | |
| 52 | 96701600 | Washer 8,4 | 4 | |
| 53 | 50200074 | Pump foot | 2 | |
| 54 | 90385900 | O-ring 25,07 x 2,62 (3100) | 1 | |
| 55 | 90067100 | Circlip ZJ30 | 1 |
Motor
Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 4.12 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Sa2 | 5.5 | 2920 | IEC 132S | IE3 | 10 | |
| RN 132Sa2 | 5.5 | 2910 | IEC 132S | IE1 | 11.1 | |
| RN 112b2 uprated | 5.5 | 2870 | IEC 112 | IE1 | 11 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112b2) ZF044 Motor flange, IEC 100/112 B14
- IEC 132, 38 mm shaft (RNE 132Sa2, RN 132Sa2) No Interpump flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft ZG044 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 132, 38 mm motor shaft No Interpump coupling listed: you need one for a 38 mm motor shaft to the pump shaft.
Other Interpump 53 E1 series pumps
E1B1611E1B1612E1B1613E1B1614E1B1807E1B1808E1B1809E1B1810E1C1609E1C1612E1C1613E1C1614E1C1808E1C1810E1C1811E1D1807E1D1808E1D1810E1D1811E1D1813E1D1814E1D1835E1E1808E1E1810E1E1811E1E1813E1E2111E1E3106E1E3107E1E3108E1E3109E1E3110E1E3111E1E3112E1E3113