59 E3 series plunger pump
E3B1911
- 11Flow, l/min
- 190Pressure, bar
- 1450Speed, rpm
- 3.97Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 11 l/min
- Pressure
- 190 bar
- Speed
- 1450 rpm
- Absorbed power
- 3.97 kW
- Plunger
- 18 mm
- Shaft
- Solid
- Weight
- 9.5 kg
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 269 | Intake/delivery valves |
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 270 | Valve plugs 58 series | ||
| KIT 289 | Complete seal Ø18 59 ser. |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 271 | Oil seal Ø15 58/59 series |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 284 | Packing Ø18 59 series |
Exploded view
Parts list
Interpump make this pump in 2 versions. The list below is for the first, male shaft (key). The others: pump head with VH integrated valve. Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 59120241 | Manifold for piston Ø18 | 1 |
| 2 | 36202551 | Valve cage | 3 |
| 3 | 94737600 | Spring Ø9,4 x 14,8 | 3 |
| 4 | 36200176 | Valve plate | 3 |
| 5 | 36200366 | Valve seat | 3 |
| 6 | 90384100 | O-ring 17,12 x 2,62 (3068) | 3 |
| 7 | 36711501 | Intake/delivery valve | 3 |
| 8 | 90384700 | O-ring 20,29 x 2,62(3081) | 3 |
| 9 | 98222600 | Valve cap M24 x 1,5 x 17 | 3 |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 |
| 12 | 58040209 | Piston Ø18 x 42 | 3 |
| 13 | 90367400 | O-ring Ø12 x 2 (120-20) | 3 |
| 14 | 36211366 | Valve seat | 3 |
| 15 | 36211276 | Spherical valve | 3 |
| 16 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 |
| 17 | 36211151 | Valve cage | 3 |
| 18 | 36719301 | Outlet valve | 3 |
| 19 | 98196600 | Plug G1/8 x 8 | 1 |
| 20 | 90359300 | O-ring 15,60 x 1,78 (2062) | 3 |
| 21 | 98213700 | Valve cap M18 x 1,5 x 10 | 3 |
| 22 | 99317700 | Vite M08 x 60 5931 12.9 G321A+M | 8 |
| 23 | 63101151 | Head ring Ø18 h.p. | 3 |
| 24 | 90265350 | Packing Ø18 x 28 x 6/3.7 hp | 3 |
| 25 | 90511150 | Anti-extr. ring Ø18 x 28 x 2 | 3 |
| 26 | 59606001 | Packing retainer+sleeve Ø18 | 3 |
| 27 | 90361200 | O-ring 31,47 x 1,78 (2125) | 3 |
| 29 | 90265000 | Seal Ø18 x 24 x 5 l.p. | 3 |
| 30 | 59210770 | Ring for seal Ø18 | 3 |
| 31 | 98210000 | Plug G3/8 x 13 | 1 |
| 32 | 96738000 | Washer 17,5 x 23 x 1,5 | 1 |
| 33 | 98217600 | Plug G1/2 x 10 | 1 |
| 34 | 96751400 | Washer 21,5 x 27 x 1,5 | 1 |
| 35 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 |
| 36 | 59211082 | Sponge gasket Ø3 x 103 | 1 |
| 37 | 59010022 | Pump crankcase | 1 |
| 38 | 58210451 | Protection | 1 |
| 39 | 90156550 | Oil seal Ø15 x 24 x 5/7 | 3 |
| 40 | 59050066 | Piston guide | 3 |
| 41 | 97739900 | Gudgeon pin Ø14 x 34 | 3 |
| 42 | 59030001 | Connecting rod complete | 3 |
| 43 | 99309900 | Screw m 8 x 35 UNI 5931 | 6 |
| 44 | 47151222 | Side crankcase cover for oil gauge | 1 |
| 45 | 90387700 | O-ring 39,34 x 2,62 (3156) | 1 |
| 46 | 70211801 | Oil sight glass | 1 |
| 47 | 59020335 | Crankshaft C.10 | 1 |
| 48 | 90075600 | Circlip Ø45 (ZJ45) | 1 |
| 49 | 99303900 | Screw m 8 x 16 UNI 5931 | 12 |
| 50 | 91837500 | Taper bearing | 2 |
| 51 | 90391300 | O-ring 67,95 x 2,62 (3268) | 2 |
| 52 | 97568000 | Shim Ø74.5 x 104 x 0.3 | 1 |
| 52 | 97567800 | Shim Ø74,5 x 104 x 0,1 | 1 |
| 53 | 98211300 | Asta livello olio G3/8 x 54 Ø4 | 1 |
| 54 | 90392200 | O-ring Ø133.02 x 2,62(3525) | 1 |
| 55 | 59160022 | Rear crankcase cover | 1 |
| 56 | 98204250 | Plug G1/4"x12 | 1 |
| 57 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 58 | 47151022 | Open side cover (47-66) | 1 |
| 59 | 90164800 | Oil seal 30 x 55 x 7 | 1 |
| 60 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 |
| 61 | 99303700 | Screw m 8 x 16-5739 | 4 |
| 62 | 96701600 | Washer 8,4 | 4 |
| 63 | 50200074 | Pump foot | 2 |
Motor
A 4-pole motor of at least 3.97 kW drives this pump at 1450 rpm. Single-phase motors are listed last, for a 230 V supply.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 112a4 | 4 | 1450 | IEC 112 | IE3 | 8.2 | |
| RN 112a4 | 4 | 1430 | IEC 112 | IE1 | 8.5 | |
| RN 100c4 uprated | 4 | 1405 | IEC 100 | IE1 | 9.1 | |
| RNM 112d4 | 4 | 1400 | IEC 112 | Single-phase | 22 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 100, 28 mm shaft (RN 100c4) ZF151 Motor flange, IEC 100/112 B14
- IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) ZF151 Motor flange, IEC 100/112 B14
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 100, 28 mm motor shaft ZG151 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 112, 28 mm motor shaft ZG151 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
Other Interpump 59 E3 series pumps
E3A1515E3A1713E3A2113E3A2115E3B1021E3B1218E3B1515E3B1713E3B2118E3B2121E3B2511E3B2513E3B2515E3C1021E3C1218E3C1515E3C1713E3C2513E3C2515E3C2518E3C2521E3E2517E3E2520E3E2813E3E2815