64 E4 series plunger pump
E4B2058
- 58Flow, l/min
- 207Pressure, bar
- 1450Speed, rpm
- 22.9Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 58 l/min
- Pressure
- 207 bar
- Speed
- 1450 rpm
- Absorbed power
- 22.9 kW
- Weight
- 31 kg
Kits
No kits are listed for this model. A supplier can look them up from the model E4B2058.
Parts list
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 3 | 90517800 | Anti-extrusion ring d. 31.0 x 35.5 x 1.5 | 6 |
| 4 | 90386500 | O-ring 29,82 x 2,62 (3118) | 6 |
| 5 | 36216266 | Intake valve plate | 3 |
| 6 | 36216151 | GUIDA VALVOLA INT. D'ASPIRAZIONE | 3 |
| 7 | 36216005 | Intake valve guide | 3 |
| 8 | 94744700 | Spring dm. 15.9 x 24.3 | 3 |
| 9 | 36727701 | Intake valve assembly | 3 |
| 10 | 99432500 | Screw M12 x 45 5931 | 4 |
| 11 | 64211015 | COP. VALVOLE D'ASPIRAZIONE | 1 |
| 12 | 90387950 | O-ring d. 40.95 x 2.62 NBR 90SH 3162 | 6 |
| 13 | 99446700 | Screw M12 x 130 5931 | 8 |
| 14 | 64210936 | Piston bolt | 3 |
| 15 | 90358400 | O-ring Ø10,82 x 1,78(2043)90SH | 3 |
| 16 | 36203866 | Delivery valve seat | 3 |
| 17 | 36209966 | Delivery valve plate | 3 |
| 18 | 36210151 | Inner delivery valve guide | 3 |
| 19 | 36213805 | Delivery valve guide | 3 |
| 20 | 94740100 | Spring dm. 12.0 x 17.0 | 3 |
| 21 | 36713401 | Delivery valve assembly | 3 |
| 22 | 99429500 | Screw M12 x 35 5931 | 8 |
| 33 | 70222551 | Crankcase plug | 6 |
| 34 | 71225951 | Crankcase plug cap | 3 |
| 35 | 71223074 | Lifting bracket | 1 |
| 36 | 98200200 | Plug per foro M10 | 4 |
| 37 | 90918550 | Bushing d. 45.0 x 49.0 x 40.0 | 6 |
| 38 | 64030001 | Connecting rod complete | 3 |
| 39 | 99309900 | Screw m 8 x 35 UNI 5931 | 6 |
| 40 | 64160022 | Rear crankcase cover | 1 |
| 41 | 90393500 | O-ring d. 171.12 x 2.62 NBR 70SH 3675 | 1 |
| 42 | 99185400 | Screw M6 x 16 5931 | 18 |
| 43 | 90167600 | Oil seal d. 36.0 x 47.0 x 7.0 | 3 |
| 44 | 98211400 | Oil dipstick d. 21.5 x 58.0 | 1 |
| 45 | 90360400 | O-ring 25,12 x 1,78 (2100) | 1 |
| 46 | 72210695 | Oil dipstick tube | 1 |
| 47 | 98210050 | Plug G3/8 x 13 TE22 | 1 |
| 48 | 90383300 | O-ring 13,95 x 2,62 (3056) | 1 |
| 49 | 96709900 | Washer 10.0 x 45.0 x 1.0 | 3 |
| 50 | 64050022 | Piston guide | 3 |
| 51 | 97742500 | Connecting-rod pin d. 18.0 x 45.0 | 3 |
| 52 | 70150122 | COP. LATERALE LATO SPIA | 1 |
| 53 | 90391500 | O-ring d. 80.60 x 2.62 NBR 70SH 3318 | 2 |
| 54 | 91847300 | Roller bearing | 2 |
| 55 | 90387700 | O-ring 39,34 x 2,62 (3156) | 1 |
| 56 | 70211801 | Oil sight glass | 1 |
| 57 | 64020035 | Crankshaft C.35.0 | 1 |
| 58 | 90075600 | Circlip Ø45 (ZJ45) | 1 |
| 59 | 70220081 | Shim 0.10 | 1 |
| 60 | 70220381 | Shim 0.25 | 1 |
| 61 | 70220581 | Shim 0.35 | 1 |
| 62 | 70150022 | COP. LATERALE LATO PTO | 1 |
| 63 | 91489500 | Key 8 x 7x45 | 1 |
| 64 | 90166800 | Oil seal d. 35.0 x 52.0 x 7.0 | 1 |
| 65 | 99426600 | Screw M12 x 25 5739 | 1 |
| 66 | 64210215 | COP. VALVOLE MANDATA G 1/4" - OPT. | 1 |
| 67 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 68 | 98204700 | Plug G 1/4"x13, opt. | 1 |
| 69 | 90206500 | Plug for bore Ø17 - TTN19 | 1 |
| 70 | 10085322 | Hydraulic motor flange sae-b | 1 |
| 72 | 64020135 | XJGE030 VITE M8x30 5931 ALBERO A GOMITI C.35 HYP SAE-B | 1 |
| 73 | 70226771 | Shaft ring D.30 h.pack | 1 |
| 74 | 92202500 | Nut M6 UNI 5588 6S | 1 |
| 75 | 70227034 | Vite M6 x 12 con incavo completa | 1 |
| 100 | 98210080 | Plug G 3/8"x13 sonda d. 6 ATEX | 1 |
| 101 | 70150622 | COP. LATERALE LATO SPIA ATEX | 1 |
| 102 | 98211450 | Oil dipstick d. 21.5 x 58 ATEX | 1 |
| 103 | 91847200 | Bearing rulli ATEX | 2 |
| 104 | 90075500 | Stop ring J45 UNI7437 | 1 |
| 105 | 99180900 | Screw M06 x 10 5931 A2-70 | 1 |
| 106 | 96693950 | Washer 6.4 x 11.0 x 0.7 D6798A inox | 1 |
| 107 | 98288700 | TARGHETTA IND. MESSA A TERRA | 1 |
| 108 | 98287850 | TARGHETTA IND. TEMP. MAX. 40/135 MOTORE IDR. SAE-B - SAE-B HYDR. MOTOR DRIVE | 1 |
Motor
A 4-pole motor of at least 22.9 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 200a4 | 30 | 1475 | IEC 200 | IE1 | 57 | |
| RN 180Lb4 uprated | 30 | 1465 | IEC 180L | IE1 | 58 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 180, 48 mm shaft (RN 180Lb4) No Interpump flange listed for this motor.
- IEC 200, 55 mm shaft (RN 200a4) No Interpump flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 180, 48 mm motor shaft No Interpump coupling listed: you need one for a 48 mm motor shaft to the pump shaft.
- IEC 200, 55 mm motor shaft No Interpump coupling listed: you need one for a 55 mm motor shaft to the pump shaft.