59 SS3 series plunger pump
SS3C2015
- 15Flow, l/min
- 200Pressure, bar
- 1750Speed, rpm
- 5.73Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 15 l/min
- Pressure
- 200 bar
- Speed
- 1750 rpm
- Absorbed power
- 5.73 kW
- Plunger
- 20 mm
- Shaft
- Solid
- Weight
- 9.5 kg
Kits
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 271 | Oil seal Ø15 58/59 series |
Other kits5
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 334 | Outlet valves S.53SS | ||
| KIT 336 | Outlet valve plug S.53 SS | ||
| KIT 341 | Inlet valves S.53SS | ||
| KIT 349 | *inlet valve caps S.59 SS | ||
| KIT 351 | Complete seal Ø20 s. 59 SS |
Water seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| KIT 350 | Packing Ø20 s. 59 SS |
Exploded view
Parts list
Interpump make this pump in 2 versions. The list below is for the first, FUORI PRODUZIONE - Male shaft (key) - (plugs) - OUT OF PRODUCTION. The others: male shaft (key) - (covers). Their parts are in Interpump's parts sheet (link above).
Positions are the balloon numbers on Interpump's exploded view.
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 59122236 | Manifold for piston Ø20 S.S. | 1 |
| 2 | 36202551 | Valve cage | 3 |
| 3 | 94737300 | Spring Ø9.4 x 14.8 - S.S. | 3 |
| 4 | 36200176 | Valve plate | 3 |
| 5 | 36203666 | Valve seat stainless (63SS) | 3 |
| 6 | 90384100 | O-ring 17,12 x 2,62 (3068) | 3 |
| 7 | 36713001 | Valve assembly (63 SS) | 3 |
| 8 | 90384700 | O-ring 20,29 x 2,62(3081) | 3 |
| 9 | 98222900 | Plug M24 x 1,5 x 17 S.S. | 3 |
| 10 | 99169000 | Screw M05 x 55 spec. A2-70 | 3 |
| 11 | 96690500 | Washer Ø5 x 11.5 x 0.4 INOX+FKM58/59/63HT | 3 |
| 12 | 59040009 | Piston Ø20 x 42 | 3 |
| 13 | 90367400 | O-ring Ø12 x 2 (120-20) | 3 |
| 14 | 53211166 | Valve seat - S.S. | 3 |
| 15 | 36211276 | Spherical valve | 3 |
| 16 | 94733300 | Spring Ø6.2 x 10.5 S.S. | 3 |
| 17 | 36211151 | Valve cage | 3 |
| 18 | 36724501 | Outlet valve S.53 SS | 3 |
| 19 | 90359300 | O-ring 15,60 x 1,78 (2062) | 3 |
| 20 | 98213720 | Plug M18 x 1,5 x 10 Ø23 F12 SS | 3 |
| 21 | 99317600 | Screw M08 x 60 5931 A2-70 | 8 |
| 22 | 90226000 | Seal Ø20 x 30 x 10 h.p. (HT) | 3 |
| 23 | 59606401 | Packing retainer Ø20+SLEEVE S.S. | 3 |
| 24 | 90361200 | O-ring 31,47 x 1,78 (2125) | 3 |
| 26 | 90225000 | Seal Ø20 x 26.15 L.P.(66HT) | 3 |
| 27 | 59211556 | Ring for packing Ø20 * SS | 3 |
| 28 | 98210066 | Plug G 3/8 x 13 stainless | 1 |
| 29 | 98218000 | Plug G 1/2 x 10 stainless | 1 |
| 30 | 96699000 | Washer Ø7.5 x 23 x 0.5 | 3 |
| 31 | 59211082 | Sponge gasket Ø3 x 103 | 1 |
| 32 | 59010022 | Pump crankcase | 1 |
| 33 | 58210451 | Protection | 1 |
| 34 | 90156550 | Oil seal Ø15 x 24 x 5/7 | 3 |
| 35 | 59050166 | Piston guide - S.S. | 3 |
| 36 | 97739900 | Gudgeon pin Ø14 x 34 | 3 |
| 37 | 59030001 | Connecting rod complete | 3 |
| 38 | 99309900 | Screw m 8 x 35 UNI 5931 | 6 |
| 39 | 47151222 | Side crankcase cover for oil gauge | 1 |
| 40 | 90387700 | O-ring 39,34 x 2,62 (3156) | 1 |
| 41 | 70211801 | Oil sight glass | 1 |
| 42 | 59020335 | Crankshaft C.10 | 1 |
| 43 | 90075600 | Circlip Ø45 (ZJ45) | 1 |
| 44 | 99303800 | Screw M8 x 16 - stainless | 12 |
| 45 | 91837500 | Taper bearing | 2 |
| 46 | 90391300 | O-ring 67,95 x 2,62 (3268) | 2 |
| 47 | 97568000 | Shim Ø74.5 x 104 x 0.3 | 1 |
| 47 | 97567800 | Shim Ø74,5 x 104 x 0,1 | 1 |
| 48 | 98211300 | Asta livello olio G3/8 x 54 Ø4 | 1 |
| 49 | 90392200 | O-ring Ø133.02 x 2,62(3525) | 1 |
| 50 | 59160022 | Rear crankcase cover | 1 |
| 51 | 98204000 | Plug G1/4 x 9 S.S. | 1 |
| 52 | 90358500 | O-ring 10,82 x 1,78 (2043) | 1 |
| 53 | 47151022 | Open side cover (47-66) | 1 |
| 54 | 90164800 | Oil seal 30 x 55 x 7 | 1 |
| 55 | 91489200 | Key 8(h9)X7 x 35 UNI 6604/A | 1 |
| 56 | 99303700 | Screw m 8 x 16-5739 | 4 |
| 57 | 96701600 | Washer 8,4 | 4 |
| 58 | 50200074 | Pump foot | 2 |
Motor
Rated at 1750 rpm, the speed of a 4-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 5.73 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Ma4 | 7.5 | 1465 | IEC 132M | IE3 | 15.3 | |
| RN 132Ma4 | 7.5 | 1440 | IEC 132M | IE1 | 15.3 | |
| RN 112c4 uprated | 6.3 | 1420 | IEC 112 | IE1 | 12.5 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112c4) ZF151 Motor flange, IEC 100/112 B14
- IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) ZF132 Motor flange, IEC 132 B14
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft ZG151 Flexible coupling, IEC 100/112, 28 mm motor to 24 mm pump
- IEC 132, 38 mm motor shaft ZG132 Flexible coupling, IEC 132, 38 mm motor to 24 mm pump