PumpLookupPump and motor part numbers
Mains Units

64 SS series plunger pump

SS6425

  • 75Flow, l/min
  • 130Pressure, bar
  • 1450Speed, rpm
  • 18.6Power, kW

50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).

Interpump 64 SS series pump

Specification

Flow
75 l/min
Pressure
130 bar
Speed
1450 rpm
Absorbed power
18.6 kW
Weight
33 kg

Exploded view (PDF, Interpump)

Kits

No kits are listed for this model. A supplier can look them up from the model SS6425.

Parts list

Positions are the balloon numbers on Interpump's exploded view.

PosPart numberDescriptionQty
3 90517800 Anti-extrusion ring d. 31.0 x 35.5 x 1.56
4 90386500 O-ring 29,82 x 2,62 (3118)6
5 36218366 Intake valve plate3
6 36216151 GUIDA VALVOLA INTERNA D'ASPIRAZIONE3
7 36216005 Intake valve guide3
8 94744700 Spring dm. 15.9 x 24.33
9 36730301 Intake valve assembly3
10 99432500 Screw M12 x 45 59314
11 64211536 COPERCHIO VALVOLE D'ASPIRAZIONE1
12 90387950 O-ring d. 40.95 x 2.62 NBR 90SH 31626
13 99446700 Screw M12 x 130 59318
14 64212166 Piston bolt3
15 90358400 O-ring Ø10,82 x 1,78(2043)90SH3
16 36209466 Delivery valve seat3
17 36209866 Delivery valve plate3
18 36210151 GUIDA VALVOLA INTERNA DI MANDATA3
19 36213805 Delivery valve guide3
20 94740100 Spring dm. 12.0 x 17.03
21 36716701 Delivery valve assembly3
22 99429500 Screw M12 x 35 59318
32 90383300 O-ring 13,95 x 2,62 (3056)4
33 96709900 Washer d. 10.0 x 45.0 x 1.03
34 64010022 Pump crankcase1
35 70222551 Crankcase plug6
36 71225951 Crankcase plug cap3
37 71223074 Lifting bracket1
38 98200200 Plug per foro M104
39 90918550 Bushing d. 45.0 x 49.0 x 40.06
40 64030001 Connecting rod complete3
41 99309900 Screw m 8 x 35 UNI 59316
42 64160022 Rear crankcase cover1
43 90393500 O-ring d. 171.12 x 2.62 NBR 70SH 36751
44 99185200 Screw M6 x 16 593118
45 90167600 Oil seal d. 36.0 x 47.0 x 7.03
46 98211400 Oil dipstick d. 21.5 x 58.01
47 90360400 O-ring 25,12 x 1,78 (2100)1
48 72210695 Oil dipstick tube1
49 64050122 Piston guide3
50 90352800 O-ring d. 29.00 x 1.50 NBR 70SH3
51 64050256 STELO GUIDA PISTONE XVFD055 VITE M6x55 59313
53 97742500 Connecting-rod pin d. 18.0 x 45.03
54 70150122 COPERCHIO CUSCINETTO LATO SPIA1
55 90391500 O-ring d. 80.60 x 2.62 NBR 70SH 33182
56 91847300 Roller bearing2
57 90387700 O-ring 39,34 x 2,62 (3156)1
58 70211801 Oil sight glass1
59 64020035 Crankshaft c .35.01
60 90075600 Circlip Ø45 (ZJ45)1
61 70220081 Shim 0.101
62 70220381 Shim 0.251
63 70220581 Shim 0.351
64 70150022 COPERCHIO CUSCINETTO LATO PTO1
65 91489500 Key 8.0 x 7.0 x 45.01
66 90166800 Oil seal d. 35.0 x 52.0 x 7.01
67 99426600 Screw M12 x 25 5739 motore idr. sae-b, sae-b hydr. motor drive1
69 90206500 Plug for bore Ø17 - TTN191
70 10085322 Hydraulic motor flange sae-b1
72 64020135 XJGE030 VITE M8x30 5931 ALBERO A GOMITI C .35 HYP SAE-B1
73 70226771 Shaft ring D.30 h.pack1
74 92202500 Nut M6 UNI 5588 6S1
75 70227034 Vite M6 x 12 con incavo completa1

Motor

A 4-pole motor of at least 18.6 kW drives this pump at 1450 rpm.

MotorkWrpmFrameClassA at 400 VSuppliers
RN 180La4 221465IEC 180LIE142  
RN 160Lc4 uprated 221450IEC 160LIE142  

The contactor and overload relay for each motor are on the motor's page.

Flange

The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.

  • IEC 160, 42 mm shaft (RN 160Lc4) No Interpump flange listed for this motor.
  • IEC 180, 48 mm shaft (RN 180La4) No Interpump flange listed for this motor.

Coupling

The flexible coupling joins the motor shaft to the pump shaft inside the flange.

  • IEC 160, 42 mm motor shaft No Interpump coupling listed: you need one for a 42 mm motor shaft to the pump shaft.
  • IEC 180, 48 mm motor shaft No Interpump coupling listed: you need one for a 48 mm motor shaft to the pump shaft.

Other Interpump 64 SS series pumps

SS6418SS6420SS6422SS6428