GM plunger pump
GM74150R
Part number P3.030.042-1
- 74Flow, l/min
- 150Pressure, bar
- 1450Speed, rpm
- 18.3Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 74 l/min (88 l/min at 60 Hz)
- Pressure
- 150 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 18.3 kW
- Max water temperature
- 65 °C
- Plunger
- 30 mm
- Shaft side
- Right
- Shaft
- Solid, Ø24 mm
- Inlet
- G 3/4
- Outlet
- G 1/2
- Weight
- 19 kg
- Oil
- 1.2 litres
Kits
No kits are listed for this model. A supplier can look them up from the model GM74150R.
Parts list
For parts not covered by the kits above, ask a supplier and quote the model GM74150R and part number P3.030.042-1.
Motor
A 4-pole motor of at least 18.3 kW drives this pump at 1450 rpm on 50 Hz. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm. Order that motor wound for 60 Hz.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RN 180Ma4 | 18.5 | 1465 | IEC 180M | IE1 | 37 | |
| RN 160Lb4 uprated | 18.5 | 1420 | IEC 160L | IE1 | 38 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 160, 42 mm shaft (RN 160Lb4) No Mazzoni flange listed for this motor.
- IEC 180, 48 mm shaft (RN 180Ma4) No Mazzoni flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 160, 42 mm motor shaft No Mazzoni coupling listed: you need one for a 42 mm motor shaft to 24 mm pump shaft.
- IEC 180, 48 mm motor shaft No Mazzoni coupling listed: you need one for a 48 mm motor shaft to 24 mm pump shaft.
Other Mazzoni GM pumps
GM18300LGM18300RGM22300LGM22300RGM25300LGM25300RGM27300LGM27300RGM30250LGM30250RGM33250LGM33250RGM35170LGM35170RGM40170LGM40170RGM43170RGM50150LGM50150RGM54150LGM54150RGM63150LGM63150R