PM-EDM-E4 plunger pump
PM-EDM E4 14200L
Part number P3.010.315
- 14Flow, l/min
- 200Pressure, bar
- 3400Speed, rpm
- 5.42Power, kW
60 Hz Rated at a motor speed for 60 Hz mains (North America, parts of South America and Asia).
Specification
- Flow
- 14 l/min
- Pressure
- 200 bar
- Speed
- 3400 rpm
- Absorbed power
- 5.42 kW
- Max water temperature
- 65 °C
- Plunger
- 14 mm
- Shaft side
- Left
- Shaft
- Solid, Ø25.4 mm
- Inlet
- G 1/2
- Outlet
- G 3/8
- Weight
- 7.5 kg
- Oil
- 0.4 litres
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.001.002 | Valve kit |
Water seals2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.003.050 | Plunger seal kit, Ø14 | ||
| P9.003.051 | Plunger seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.004.021 | Ceramic plunger kit, Ø14 |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.039.001 | Oil seal kit, Ø20 |
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.040.034 | Complete pump head, Ø14 | ||
| P9.041.008 | Connecting rod kit |
Parts list
For parts not covered by the kits above, ask a supplier and quote the model PM-EDM E4 14200L and part number P3.010.315.
Motor
Rated at 3400 rpm, the speed of a 2-pole motor on a 60 Hz supply. The motors below are listed with their 50 Hz figures and are at least 5.42 kW. Order the one you pick wound for 60 Hz and your supply voltage.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Sa2 | 5.5 | 2920 | IEC 132S | IE3 | 10 | |
| RN 132Sa2 | 5.5 | 2910 | IEC 132S | IE1 | 11.1 | |
| RN 112b2 uprated | 5.5 | 2870 | IEC 112 | IE1 | 11 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112b2) No Mazzoni flange listed for this motor.
- IEC 132, 38 mm shaft (RNE 132Sa2, RN 132Sa2) No Mazzoni flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft No Mazzoni coupling listed: you need one for a 28 mm motor shaft to 25.4 mm pump shaft.
- IEC 132, 38 mm motor shaft No Mazzoni coupling listed: you need one for a 38 mm motor shaft to 25.4 mm pump shaft.
Other Mazzoni PM-EDM-E4 pumps
PM-EDM E4 8200LPM-EDM E4 8200RPM-EDM E4 10200LPM-EDM E4 10200RPM-EDM E4 11200LPM-EDM E4 11200RPM-EDM E4 14200RPM-EDM E4 15200LPM-EDM E4 15200R