PMD-HY plunger pump
PM HY 15200L
Part number P3.010.214
- 15Flow, l/min
- 200Pressure, bar
- 1450Speed, rpm
- 5.8Power, kW
50 Hz Rated at a motor speed for 50 Hz mains (UK, Europe, Africa, Australia, most of Asia).
Specification
- Flow
- 15 l/min
- Pressure
- 200 bar
- Speed
- 1450 rpm
- Absorbed power
- 5.8 kW
- Max water temperature
- 65 °C
- Plunger
- 18 mm
- Shaft side
- Left
- Shaft
- Solid, Ø15.9 mm
- Inlet
- G 1/2
- Outlet
- G 3/8
- Weight
- 8.5 kg
- Oil
- 0.4 litres
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.001.002 | Valve kit |
Water seals2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.003.003 | Plunger seal kit | ||
| P9.003.004 | Plunger seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.004.023 | Ceramic plunger kit |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.039.001 | Oil seal kit, Ø20 |
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.040.002 | Complete pump head | ||
| P9.041.008 | Connecting rod kit |
Parts list
For parts not covered by the kits above, ask a supplier and quote the model PM HY 15200L and part number P3.010.214.
Motor
A 4-pole motor of at least 5.8 kW drives this pump at 1450 rpm.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 132Ma4 | 7.5 | 1465 | IEC 132M | IE3 | 15.3 | |
| RN 132Ma4 | 7.5 | 1440 | IEC 132M | IE1 | 15.3 | |
| RN 112c4 uprated | 6.3 | 1420 | IEC 112 | IE1 | 12.5 |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 112, 28 mm shaft (RN 112c4) No Mazzoni flange listed for this motor.
- IEC 132, 38 mm shaft (RNE 132Ma4, RN 132Ma4) No Mazzoni flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 112, 28 mm motor shaft No Mazzoni coupling listed: you need one for a 28 mm motor shaft to 15.9 mm pump shaft.
- IEC 132, 38 mm motor shaft No Mazzoni coupling listed: you need one for a 38 mm motor shaft to 15.9 mm pump shaft.
Other Mazzoni PMD-HY pumps
PM HY 8200LPM HY 8200RPM HY 10200LPM HY 10200RPM HY 11200LPM HY 11200RPM HY 12200LPM HY 12200RPM HY 13200LPM HY 13200RPM HY 14200LPM HY 14200RPM HY 15200R