PMD car wash plunger pump
PMD CW 8200L
Part number P3.012.029
- 8.5Flow, l/min
- 200Pressure, bar
- 1450Speed, rpm
- 3.34Power, kW
50 or 60 Hz The maker gives figures for both supplies.
Specification
- Flow
- 8.5 l/min (10.2 l/min at 60 Hz)
- Pressure
- 200 bar
- Speed
- 1450 rpm (1740 rpm at 60 Hz)
- Absorbed power
- 3.34 kW
- Max water temperature
- 65 °C
- Plunger
- 18 mm
- Shaft side
- Left
- Shaft
- Solid, Ø24 mm
- Inlet
- G 1/2"
- Outlet
- G 3/8"
- Weight
- 7.5 kg
- Oil
- 0.4 litres
Kits
Valves1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.001.002 | Valve kit |
Water seals2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.003.055 | Plunger seal kit | ||
| P9.003.056 | Plunger seal kit |
Plungers1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.004.023 | Ceramic plunger kit |
Oil seals1
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.039.001 | Oil seal kit, Ø20 |
Other kits2
| Part number | Description | Per pump | Suppliers |
|---|---|---|---|
| P9.040.013 | Complete pump head | ||
| P9.041.008 | Connecting rod kit |
Parts list
For parts not covered by the kits above, ask a supplier and quote the model PMD CW 8200L and part number P3.012.029.
Motor
A 4-pole motor of at least 3.34 kW drives this pump at 1450 rpm on 50 Hz. Single-phase motors are listed last, for a 230 V supply. On a 60 Hz supply a motor with the same poles turns it at 1740 rpm. Order that motor wound for 60 Hz.
| Motor | kW | rpm | Frame | Class | A at 400 V | Suppliers |
|---|---|---|---|---|---|---|
| RNE 112a4 | 4 | 1450 | IEC 112 | IE3 | 8.2 | |
| RN 112a4 | 4 | 1430 | IEC 112 | IE1 | 8.5 | |
| RN 100c4 uprated | 4 | 1405 | IEC 100 | IE1 | 9.1 | |
| RNM 112d4 | 4 | 1400 | IEC 112 | Single-phase | 22 at 230 V |
The contactor and overload relay for each motor are on the motor's page.
Flange
The flange bolts the pump to the face of the motor. It depends on the motor's IEC frame.
- IEC 100, 28 mm shaft (RN 100c4) No Mazzoni flange listed for this motor.
- IEC 112, 28 mm shaft (RNE 112a4, RN 112a4, RNM 112d4) No Mazzoni flange listed for this motor.
Coupling
The flexible coupling joins the motor shaft to the pump shaft inside the flange.
- IEC 100, 28 mm motor shaft No Mazzoni coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
- IEC 112, 28 mm motor shaft No Mazzoni coupling listed: you need one for a 28 mm motor shaft to 24 mm pump shaft.
Other Mazzoni PMD car wash pumps
PMD CW 8200RPMD CW 10200LPMD CW 10200RPMD CW 11200LPMD CW 11200RPMD CW 12200LPMD CW 12200RPMD CW 13200LPMD CW 13200RPMD CW 14200LPMD CW 14200RPMD CW 15200LPMD CW 15200R